Commit Graph

83 Commits

Author SHA1 Message Date
Randy Mackay 597a4b912a Copter: fix to allow building HIL_MODE_SENSORS 2013-03-18 13:41:52 +09:00
Randy Mackay 102b5da59d Copter: remove unnecessary #defines from APM_Config.h 2013-02-24 14:41:56 +09:00
Randy Mackay 67c69a19ee Copter: remove baro-only alt hold
Saves 8 bytes of memory and more importantly simplifies the alt hold
calculations
2013-02-24 14:41:29 +09:00
Randy Mackay b74da54c98 Copter: enable inav xy by default 2013-02-24 14:41:21 +09:00
Randy Mackay 766ccdf6f8 Copter: add selection of inertial nav wp controller to APM_Config.h 2013-02-24 14:41:13 +09:00
Robert Lefebvre dde713aaa5 Arducopter: Backing out my changes for a new Loiter Repositioning mode. Leonard and Jonathan's work will trump this. 2013-01-20 21:32:00 +09:00
Randy Mackay fef7569dee Copter: added experimental LOITER_REPOSITIONING #define to config.h
APM_Config.h should be used to overriding the standard parameters but
they still require a definition in config.h or they will be undefined
when built by the mission planner.
2013-01-14 13:34:14 +09:00
Andrew Tridgell 394dccf9a8 Copter: make config defaults match 2.9 2013-01-02 15:27:42 +11:00
Robert Lefebvre 6e64b1b357 ACM: Precision Loiter RePositioning code.
Protected behind a #define
2013-01-02 09:19:39 +11:00
Pat Hickey 22ac39a4ef ArduCopter: disable and remove InertialNav defines from APM_Config
* We're not going to have the RAM available to support those in general release
2012-12-20 14:52:29 +11:00
Pat Hickey 2aa4657315 ArduCopter: changes to use CONFIG_HIL_BOARD 2012-12-20 14:52:28 +11:00
Pat Hickey 4b84e99f85 remove dumb user hooks comments 2012-12-20 14:52:28 +11:00
Robert Lefebvre 1b97a92098 ACM: Code Cleanup 2012-12-08 14:49:38 -05:00
rmackay9 85c8bdce15 ArduCopter: removed unused and out-of-date #defines from APM_Config.h 2012-12-08 13:38:39 +09:00
rmackay9 4ca27defb3 ArduCopter: update comments related to CH7 switch options 2012-12-06 17:40:36 +09:00
rmackay9 8d682b9812 ArduCopter: disable INERTIAL_NAV_XY by default 2012-12-06 10:32:02 +09:00
rmackay9 072ffec493 ArduCopter: allow INERTIAL_NAV to be enabled separately for horizontal and vertical position 2012-12-06 10:31:41 +09:00
rmackay9 aa5e7e63a0 ArduCopter: switch on INS in APM_Config.h (i.e. on by default for users uploading through Arduino IDE) 2012-12-06 10:31:36 +09:00
Robert Lefebvre 3e65dd3ded ACM: TradHeli APM_Config.h changes 2012-12-04 13:32:40 -05:00
Robert Lefebvre 07d7d90882 ACM: TradHeli
Bringing in Low Pass Filter for Rate Controllers
2012-11-26 21:51:23 -05:00
Robert Lefebvre 6b8c39dd10 ACM: Creating Yaw_Look_Ahead yaw mode.
This function is not fully tested yet.
2012-11-26 21:37:13 -05:00
Robert Lefebvre 9e45e906fb ACM: TradHeli
Move some TradHeli #defines into one place in APM_Config to clean up config.h and defines.h
2012-11-26 19:09:55 -05:00
Jason Short f344eb875a ACM: Allow greater than 45° pitch and roll in Stab 2012-11-11 18:07:58 -08:00
rmackay9 cec96a76d7 ArduCopter: comment out InertialNav related Alt Hold and Loiter PID changes from APM_Config.h 2012-11-07 19:21:36 +09:00
rmackay9 fa0963d592 ArduCopter: APM_Config.h - make it ever so slightly easier to enable INERTIAL_NAV 2012-10-08 12:31:51 +09:00
rmackay9 95763e610b ArduCopter: allow DMP to run in parallel with DCM
Parallel DMP can be enabled by #define SECONDARY_DMP_ENABLED in APM_Config.h
New DMP dataflash log type added to allow easy comparison with DCM
2012-09-30 00:25:40 +09:00
Pat Hickey b02340fe10 APM_Config.h for ArduCopter/ArduPlane: better descr of APM2_BETA_HARDWARE 2012-09-05 15:36:57 -07:00
uncrustify 09fbe8e29a uncrustify ArduCopter/APM_Config.h 2012-08-21 19:19:50 -07:00
rmackay9 1d32e03f61 ArduCopter: added ACCEL_ALT_HOLD and INERTIAL_NAV to config.h and commented out of APM_Config.h.
Reduces possibility of difference between arduino ide compiled code and script built code (i.e. autotester, mission planner)
2012-08-19 12:31:02 +09:00
Jason Short 387a021c30 ACM : APM_Config.h : default removed for toy mixer. 2012-08-16 15:41:35 -07:00
Jason Short c305237e3a ACM : Added CH_7 Multimode 2012-08-11 22:37:26 -07:00
Jason Short 4a56e8ea2c ACM : Toy Mixer options 2012-08-09 16:59:43 -07:00
Amilcar Lucas af08b630cd Spellcheck in comments 2012-08-06 00:21:14 +02:00
rmackay9 3047084ed3 ArduCopter: added DMP_ENABLED to APM_Config.h to make it easier for people to enable it. 2012-07-28 16:31:38 +09:00
Jason Short 97845cace1 Arducopter: INS
Updated INS gains
2012-07-18 22:57:10 -07:00
Andreas M. Antonopoulos a976a59c88 AP_Limits: Configuration defaults moved to config.h. Fixed AP_LIMITS==DISABLED handling. 2012-07-16 11:46:43 -07:00
Andreas M. Antonopoulos c73f7ef3ab AP_Limits library, provides modular "limits" such as altitude and geo-fencing. 2012-07-14 19:26:17 -07:00
Andrew Tridgell 60caaa4b04 MAVLink: remove MAVLink 0.9 protocol support
this simplifies the code a lot. We're not going back to 1.0
2012-07-05 13:00:46 +10:00
Jason Short 8b212d8baa Adjustments to the Inertial_nav
lowered Rate_I and Rate_P to be less jumpy. raised throttle_p
added a clear to rate when entering loiter
moved the raw reporting
2012-06-20 08:47:47 -07:00
Jason Short e31a1d969f Inertial Nav disabled by default 2012-06-13 22:37:52 -07:00
Jason Short c42f9ece43 Inertial Control
I added inertial navigation based on the simulator data. This is an option only available if you compile with Arduino and set
#define INERTIAL_NAV ENABLED
in the APM_Config.h file.

This has been tested for one real flight and did not crash my quad, but consider it very alpha. The quad may be unpredictable at first until the error correction fixes poorly calibrated accels. Be Careful.

Most of the real work is in the inertia file, but the error correction, new variable defines and calibration calls are sprinkled throughout.

The Log should record RAW messages with special debugging values.
2012-06-13 22:34:45 -07:00
Andrew Tridgell 4fee26437b MAVLink: make ACM build with MAVLink 1.0 possible in arduino GUI 2012-04-24 22:24:58 +10:00
rmackay9 68e37774a6 ArduCopter - removed #define AUTOMATIC_DECLINATION ENABLED line to ensure users don't try and enable it because it needs a bit more work before it's ready for general use 2012-03-15 21:58:42 +09:00
Adam M Rivera 2524f9c8df AP_Declination: Added new config value to allow the user to have the declination overwritten on every 3D fix.
Signed-off-by: Andrew Tridgell <tridge@samba.org>
2012-03-11 20:59:47 +11:00
rmackay9 706bea5992 ArduCopter - added OCTA_QUAD_FRAME to comments in APM_Configh.h to help user select frame when compiling with arduino 2012-03-06 22:15:02 +09:00
Pat Hickey 6573cec611 ArduCopter APM_Config.h: add sample custom channel config
* uses new config variables introduced in 8a19543fd1e09621ba
2012-02-11 16:05:51 -08:00
Jason Short 7c25253422 Enabled auto throttle hold 2012-01-20 22:52:31 -08:00
Jason Short 2831ff9148 Off by default 2012-01-20 22:52:29 -08:00
Jason Short 3ebed0b278 This allows users to test the Auto_throttle hold or cruise value 2012-01-14 11:43:52 -08:00
analoguedevices 70b7951366 Eliminated second instance of APM2 #defines 2012-01-12 20:38:41 +00:00