Commit Graph

13711 Commits

Author SHA1 Message Date
Randy Mackay 47c135c4e1 GCS_MAVLink: add comments around checking target 2014-09-30 15:18:35 +10:00
Randy Mackay 0322a876eb GCS_MAVLink: check target before erasing log 2014-09-30 15:18:31 +10:00
Randy Mackay 77e89214eb Copter: shift pos targets to current location before takeoff 2014-09-29 15:26:54 +09:00
Randy Mackay dbe1c55666 AC_WPNav: add shift_wp_origin_to_current_pos for takeoff
This shifts the origin to the vehicle's current position and should be
called just before take-off to ensure there are no sudden roll or pitch
moves on takeoff.
2014-09-29 15:26:18 +09:00
Randy Mackay 41d7462eee LogAnalyzer: add POSHOLD to TestPitchRollCoupling 2014-09-29 11:46:02 +09:00
Randy Mackay 0803d79701 INS: param descriptions for ACC2, GYR2 2014-09-27 21:05:33 +09:00
Randy Mackay e14ae0c0b1 Compass: param descriptions for OFS2, MOT2 2014-09-27 17:59:26 +09:00
Jonathan Challinger 73e1719ee1 Copter: print frame type in log headers 2014-09-27 16:11:21 +09:00
Randy Mackay 8aa5c10d53 Copter: remove unused AIRFRAME definition 2014-09-27 15:15:13 +09:00
Randy Mackay 1a249a8129 Copter: check target of set-mode request from GCS
Issue discovered and fix contributed by Deadolous
2014-09-27 12:22:12 +09:00
Randy Mackay 5ca3c4baf6 Mission: fix CHANGE_ALT to store climb rate in lat param
The slightly confusing storage of climb rate in the lat field led to a
bug fix a few months ago that actually created a bug.
2014-09-26 23:23:04 +09:00
Randy Mackay ef0e37b478 Copter: bugfix to condition-yaw for relative angles
Thanks to roque-canales for raising the issue and paradisephil for finding
the specific piece of code that went wrong and suggesting the fix.
2014-09-26 12:22:58 +09:00
Randy Mackay 45bc9fd10c Copter: add AC3.2 default to LOG_BITMASK value 2014-09-25 15:32:21 +09:00
Randy Mackay 0d88b602ec Copter: fix RSSI_RANGE param values
The extra .0 after the 5 was causing the mission planner to not display
5V in the dropdown even though the value was 5.
2014-09-25 15:32:20 +09:00
Craig Elder ab46f2d2fe Frame_params: 3DR_Iris+ reduced WP_NAV to 650 2014-09-24 13:43:52 -07:00
Jonathan Challinger 7c3e614c19 LogAnalyzer: Add IMU Mismatch check 2014-09-24 15:50:23 +09:00
Randy Mackay ed566fa56c Copter: update AC3.2-rc10 release notes 2014-09-24 14:30:10 +09:00
Andrew Tridgell 4b01cee330 Plane: send heartbeat to AFS when calibrating sensors 2014-09-24 12:02:39 +10:00
Andrew Tridgell 5eee51b5a4 APM_OBC: added heartbeat() method
this is used for when the plane is calibrating sensors, to ensure
heartbeat is continued to the failsafe board
2014-09-24 12:02:38 +10:00
Andrew Tridgell 1fa03a49c9 Plane: disable the CLI if AFS failsafe enabled on APM2
the flash space is a bit too low for both CLI and AFS
2014-09-24 12:02:38 +10:00
Randy Mackay 41c576044f Copter: allow passthru for ch 9 ~ 14
Based on work by Emile Castelnuovo
2014-09-23 22:55:19 +09:00
Randy Mackay c2c5807ec7 Compass: always default devid to zero 2014-09-23 20:35:18 +09:00
Randy Mackay d4cfb432ca Copter: use disparity threshold define for pre-arm checks
There are two duplicate checks, one in the pre-arm checks (i.e. checks
run every 15 seconds or so before the vehicle is armed) and one in the
arming checks (run immediately before arming).  The definition in the
pre-arm checks was still using the old hardcoded value.
2014-09-23 19:33:04 +09:00
lthall 2b4f5fa79d Copter: increase autotune limits
Rate D max to 0.020 (was 0.015)
Rate P max to 0.35 (was 0.25)
Stab P max to 20 (was 15)
2014-09-22 21:33:35 +09:00
Randy Mackay cf3b2be99c AC_PosControl: 4hz filter on z-axis velocity error 2014-09-22 13:40:01 +09:00
Randy Mackay 665f353416 AC_PosControl: 2hz filter on accel error
Replaced hard-coded filter with LowPassFilter class allowing the
filter's to be 2hz on both APM and Pixhawk
2014-09-21 17:53:55 +09:00
Randy Mackay cf35bd3f42 LowPassFilter: add div by zero check 2014-09-21 17:33:59 +09:00
Randy Mackay e7753223ba Copter: low battery msg to severity high 2014-09-21 17:33:19 +09:00
Randy Mackay 193bc5331a Copter: cleanup enabling of cli and frsky telem for APM 2014-09-20 14:41:26 +09:00
Randy Mackay d8d1b38a52 Copter: increase Alt Disparity check to 2m 2014-09-20 12:24:36 +09:00
Randy Mackay 9bbf40109e Copter: add LOG_FROM_STARTUP definition
Uncommenting this line in APM_Config.h will start logging as soon as the
board starts up instead of waiting for the vehicle to be armed
2014-09-20 12:23:47 +09:00
Jason Short b2238b7c8a Copter: auto esc calibration
Throttle is raised to maximum and then lowered without any input from
pilot
2014-09-19 22:21:49 +09:00
Randy Mackay 58602bd1ae Copter: move esc calibration to separate file
Restructured into case statement
Replaced use of g.throttle_max with definition
Added more comments
Send message to ground station instead of printing on console (although
probably both are unlikely to be read)
2014-09-19 22:21:47 +09:00
Jason Short b57539a9ad AP_Motors: throttle_pass_through accepts pwm 2014-09-19 22:21:45 +09:00
Randy Mackay 1c11a91ec2 Copter: rename land_maybe_complete function 2014-09-19 16:43:17 +09:00
Randy Mackay b9977a1115 Copter: add land_complete_maybe flag 2014-09-19 16:43:15 +09:00
Randy Mackay 6951a20fb0 Copter: soften loiter target when maybe landed
Applies to auto's land, land, loiter, pos hold and rtl flight modes
2014-09-19 16:43:12 +09:00
Randy Mackay 765420ee04 AC_WPNav: add loiter_soften_for_landing method
This resets the position target to the current location.
2014-09-19 16:43:10 +09:00
Randy Mackay b552479e31 Copter: typo fix for baro vs inav alt disparity definition 2014-09-18 17:32:03 +09:00
Randy Mackay 18e3db0011 Copter: define limit for baro vs inav alt disparity 2014-09-18 17:24:40 +09:00
Andre Kjellstrup b4c6d6395e Copter: reset battery_fs after dis/rearming 2014-09-18 11:17:03 +09:00
Craig Elder 3f687733e6 Frame_params: added 3DR_AERO_M.param 2014-09-17 18:48:48 -07:00
Craig Elder da66c7df36 Frame_params: 3DR_Aero_RTF.param Changed tuning 2014-09-17 18:46:52 -07:00
Randy Mackay ad37fc0408 AC_WPNav: WP_SPEED_DN parameter range to 0~500
Previous permissible descent speed of 10m/s was unnecessarily lenient.
Users can still bypass the suggested range through the MP's full
parameter list if they really want a very high descent speed.
2014-09-18 10:44:33 +09:00
Randy Mackay 6da1420541 HAL_VRBrain: implement force_safety_on 2014-09-18 09:58:48 +09:00
Randy Mackay ffcd259b4e HAL_PX4: implement force_safety_on 2014-09-18 09:58:46 +09:00
Randy Mackay 033b14db16 AP_HAL: add force_safety_on method 2014-09-18 09:58:44 +09:00
Randy Mackay 2efeb768e0 Copter: allow GCS to turn safety switch on/off 2014-09-17 21:51:25 +09:00
Randy Mackay 9bcf9a31ed Copter: set sys_status motor outputs bit from safety switch 2014-09-17 21:51:23 +09:00
Randy Mackay 9f3803052f Copter: add support for DO_PARACHUTE from GCS
Mission command support was already included but this adds support for
DO_PARACHUTE received as a COMMAND_LONG message which are sent from the
GCS when the command should be executed immediately
2014-09-17 21:14:26 +09:00