Commit Graph

58 Commits

Author SHA1 Message Date
Robert Lefebvre 8610da7fbc Copter: autopilot modes to check for motor interlock status 2015-05-01 14:30:33 +09:00
Jonathan Challinger 91a03ae0e7 Copter: add PILOT_THR_FILT and call set_throttle_out functions with that value 2015-04-16 21:00:11 +09:00
Jonathan Challinger b27b9dd86e Copter: use new throttle interface 2015-04-16 20:59:48 +09:00
Randy Mackay 77d8f88e45 Copter: fence, rtl, land use alt-above-home 2015-02-12 15:08:00 +09:00
Randy Mackay c51ba8cd03 Copter: integrate mount frontend-backend restructure
initialise mount on startup
use Mount::has_pan_control method
Remove calls to unimplemented mount.configure_cmd
Remove call to update_mount_type which will be handled from within mount
lib
2015-01-29 13:57:18 +11:00
Randy Mackay 31b2534c1d Copter: rename mount.set_roi_cmd to set_roi_target 2015-01-29 13:57:18 +11:00
Randy Mackay f1a6b06586 Copter: remove redundant filter status checks 2015-01-22 14:39:57 +09:00
Randy Mackay 199dc3454d Copter: replace GPS_ok with position_ok
position_ok uses the EKF's filter status if the EKF is being used
otherwise it falls back to the GPS based checks used by inertial nav
2015-01-22 14:39:45 +09:00
Randy Mackay a4f71e5946 Copter: replace inav's position_ok with get_filter_status 2015-01-22 14:39:42 +09:00
Randy Mackay 05fedbf98f Copter: minor formatting fixes 2014-12-18 16:38:34 +09:00
Jonathan Challinger 91bff63267 Copter: Fix LAND overshoot issue 2014-12-18 16:38:31 +09:00
priseborough 963cc4d60a Copter: Add velocity gain scaler to interfaces
Allows nav gain to be scaled to compensate for optical flow noise
2014-12-06 18:16:50 +11:00
priseborough 9844dacf40 Copter: Add EKF ground speed limit to loiter speed control
This is required to prevent the speed controller saturating the optical flow sensor during low altitude flying.
2014-12-06 18:16:50 +11:00
Jonathan Challinger c7a38c4350 Copter: use force_descend option on auto landings 2014-11-13 18:40:42 -08:00
benoit35690 e22130cbc7 Copter: minor format fix 2014-10-21 11:54:35 +09:00
benoit35690 3c01353dcd Copter: fix compiler warning in control_auto.pde 2014-10-21 11:53:17 +09:00
Randy Mackay 3296eb24b3 Copter: add comments to auto_loiter 2014-10-20 10:54:57 +09:00
Jonathan Challinger d7d8330303 Copter: loiter copter without accepting user input at end of auto mission 2014-10-20 10:46:14 +09:00
squilter 343a673762 Copter: reset ROI when requested, regardless of current MOUNT_MODE 2014-10-20 10:41:06 +09:00
Randy Mackay 6659473420 Copter: support GUIDED_ENABLE and GUIDED_LIMITS
Split of NAV_GUIDED into these two command necessitated guided mode
store the limits
2014-10-13 21:40:24 +09:00
Randy Mackay 77e89214eb Copter: shift pos targets to current location before takeoff 2014-09-29 15:26:54 +09:00
Randy Mackay ef0e37b478 Copter: bugfix to condition-yaw for relative angles
Thanks to roque-canales for raising the issue and paradisephil for finding
the specific piece of code that went wrong and suggesting the fix.
2014-09-26 12:22:58 +09:00
Randy Mackay 1c11a91ec2 Copter: rename land_maybe_complete function 2014-09-19 16:43:17 +09:00
Randy Mackay 6951a20fb0 Copter: soften loiter target when maybe landed
Applies to auto's land, land, loiter, pos hold and rtl flight modes
2014-09-19 16:43:12 +09:00
Jonathan Challinger 5b36e65cb9 Copter: Add parameter LAND_REPOSITION to enable/disable user input during auto-mode landings and descents 2014-07-06 19:20:25 +09:00
Randy Mackay 81355d1adf Copter: DO_SET_ROI accepted outside missions
Moved ROI logic to new set_auto_yaw_roi function.
2014-07-06 17:02:06 +09:00
MousS ae8fb3f1c5 Copter: MAV_CMD_CONDITION_YAW accepted outside missions 2014-07-06 17:01:15 +09:00
Randy Mackay fdc0ec837b Copter: add nav_guided suport to Auto mode 2014-07-06 17:00:31 +09:00
Randy Mackay 09fc777ab9 Copter: slow motors after landing in AUTO
This resolves an issue in which the vehicle could tip over if the pilot
did not reduce the throttle to zero soon after landing in AUTO mode
2014-06-10 22:56:53 +09:00
Randy Mackay 08801eebf2 Copter: integrate AttControl's set_yaw_target_to_current_heading 2014-06-10 20:02:51 +09:00
Randy Mackay 77d5d682c1 Copter: integrate init_targets rename to relax_bf_rate_controller
Also remove unnecessary init_targets from flight mode init functions.
2014-06-10 20:02:29 +09:00
Randy Mackay d5a0ca4f3c Copter: integrate init_loiter_target name change 2014-05-19 12:27:29 +09:00
Randy Mackay f7a9ee24ef Copter: minor comment update 2014-05-15 16:21:35 +09:00
Andrew Chapman 3f0a52cb53 Copter: ch7/8 switch for auto pause/continue
- added new mode for CH7/CH8 (#24, auto mission reset)
- changed mission.start() to mission.start_or_resume() in auto_init()
2014-05-08 23:09:42 +09:00
Randy Mackay 3cc5b9446f Copter: AUTO and Guided call wp_and_spline_init 2014-05-08 16:15:55 +09:00
Randy Mackay f29ad3a2e0 Copter: bug fix for when WP_YAW_BEHAVIOR is 0 2014-04-17 16:53:06 +09:00
Randy Mackay c53a0fcfd9 Copter: conditional yaw fix
waypoint command was setting auto_yaw_mode when it was run after the
do-cmd
yaw_look_at_heading was being set to current heading which was
overwriting the caller's desired heading
2014-04-17 16:41:36 +09:00
Randy Mackay e6d2692eab Copter: Loiter_Turns moves to edge of circle if location provided 2014-04-16 16:28:08 +09:00
Randy Mackay 7d5d0d12a2 Copter: spline bug fixes
Next waypoint's location must be passed in even if it's a straight
segment.
mission.get_next_nav_cmd's start_index should be the current command +1
2014-03-29 17:57:45 +09:00
Randy Mackay 392162747a Copter; integrate WPNAV's get_yaw 2014-03-28 09:23:17 +09:00
Randy Mackay 3753550a72 Copter: integrate get_spline_yaw 2014-03-28 09:23:11 +09:00
Randy Mackay c0f12911ec Copter: minor format change 2014-03-28 09:23:02 +09:00
Randy Mackay 0822adfb34 Copter: integrate spline navigation 2014-03-28 09:22:59 +09:00
Randy Mackay 92738533fe Copter: auto starts only when num cmds > 1
num_commands will be 1 when there is no mission because home counts as
the first command
2014-03-19 12:10:30 +09:00
Randy Mackay 359f1a27ec Copter: process cmds from mission lib 2014-03-19 12:10:11 +09:00
Randy Mackay fdae812814 Copter: DO_SET_ROI persists across waypoints
Users should add a DO_SET_ROI command with zero lat, lon and alt to
restore the yaw control to the default control (which is normally
look-at-next-wp)
2014-02-18 21:36:02 +09:00
Randy Mackay 3ccd1ad170 Copter: integrate AttControl method name changes 2014-02-15 06:09:08 +11:00
Randy Mackay 2c1ec9d0c0 Copter: remove control_roll, pitch, yaw from control files 2014-02-15 05:27:47 +11:00
Randy Mackay d3a126d078 Copter: integrate slew_yaw into control_auto 2014-02-15 05:27:45 +11:00
Randy Mackay 798add0b5c Copter: remove guided from control_auto.pde 2014-02-15 05:27:42 +11:00