Commit Graph

17514 Commits

Author SHA1 Message Date
Andrew Tridgell 6009ae55b1 AP_Math: fixed build of eulers example sketch 2015-07-17 08:24:49 +10:00
Randy Mackay 277e3d8675 Copter: enable ekf_check only after ekf origin has been set 2015-07-16 14:54:12 +09:00
Randy Mackay cc0ab26f5d Mount: fix init of mode
Mode was being set from MNT_DEFTL_MODE parameter before that parameter's
value had been initialised from eeprom
2015-07-16 14:14:01 +09:00
Julien BERAUD 802698d491 Merge pull request #2564 from Parrot-Developers/master
RCOutput_Bebop: use CLOCK_MONOTONIC instead of CLOCK_REALTIME
2015-07-15 14:44:31 +02:00
Jean-Baptiste Dubois 9e5d13c1de RCOutput_Bebop: use CLOCK_MONOTONIC instead of CLOCK_REALTIME
CLOCK_MONOTONIC is not affected by discontinuous jumps in the system time.
2015-07-15 12:08:44 +02:00
Randy Mackay 35dd7322d2 Copter: float constant fix for heli's check_dynamic_flight
No functional change
2015-07-14 20:17:17 +09:00
Robert Lefebvre 5541899a99 Copter: Whitespace fixes. 2015-07-14 20:17:16 +09:00
Robert Lefebvre 24d0031389 Copter: replace slow_start() with full set_throttle_takeoff() function. 2015-07-14 20:17:15 +09:00
Robert Lefebvre 0a69c13b1d Copter: Fix helicopter ground stabilization in Auto, Brake, Circle, Guided, Land and RTL modes. 2015-07-14 20:17:14 +09:00
Robert Lefebvre 14882bc6a8 AC_AttitudeControl: Remove unused takeoff jump #define 2015-07-14 20:16:58 +09:00
Randy Mackay f3770432f9 Copter: fix do_user_takeoff indentation
No functional change
2015-07-14 20:16:57 +09:00
Robert Lefebvre bc6deb5575 Copter: Tradheli Mavlink Takeoff to fail if rotor not spinning. 2015-07-14 20:13:46 +09:00
Robert Lefebvre e1902e2289 AP_MotorsHeli: Remove unused _dt variable. 2015-07-14 20:13:43 +09:00
squilter 506970fbd3 Tools: Add Bebop prereqs to Ubuntu script 2015-07-14 18:10:56 +09:00
Randy Mackay 7d2fe3cc2b AP_GPS_UBlox: remove unused member 2015-07-14 15:02:15 +09:00
Randy Mackay 2c33250bee AP_GPS_UBlox: send_next_rate_update always runs all steps
Moving the if, endif checks within the case statement ensures the state
machine goes through all 10 states
2015-07-14 15:02:13 +09:00
Randy Mackay 4b015d2091 AP_GPS: remove compiler warnings 2015-07-14 15:02:10 +09:00
Randy Mackay df3a04e284 AP_GPS: reduce fake Ublox hdop to 130 2015-07-14 15:02:08 +09:00
Andy Piper 425e26c258 Copter: reduce GPS_HDOP_GOOD params default to 140
This is required as part of the ublox change from pdop to hdop
2015-07-14 15:02:06 +09:00
Andy Piper 5ccc58ffb4 AP_GPS: Read actual hDOP value from UBLOX messages
Before we were reading the position DOP and calling it hDOP. Since the
other drivers actualy read hDOP it seem best to do the same.
Fixes issue 462.
2015-07-14 15:02:03 +09:00
Randy Mackay 4e3d0ae0c1 Copter: fix startup logging
Removed potentially endless loop caused by start_logging calling
Log_Write_Startup which called should_log which could then call
start_logging.
Moved disarm event logging above motors disarm so it is logged
2015-07-14 14:03:00 +09:00
Randy Mackay 14561f04b0 Rover: log IMUDT 2015-07-14 13:31:58 +09:00
Randy Mackay b670988e05 Plane: log IMUDT 2015-07-14 13:31:56 +09:00
Randy Mackay 063faa0383 Copter: add RTL_CLIMB_MIN
Vehicle climbs at least this many cm when entering RTL
2015-07-13 20:38:52 +09:00
mirkix 1226cc7dae Tools/autotest: Add location Bremerhaven 2015-07-13 11:04:53 +09:00
Paul Riseborough 610595bfb9 AP_NavEKF: Prevent position drift between arming and takeoff when using OF 2015-07-13 10:54:36 +09:00
Randy Mackay c33453fcf9 Copter: rename ESC param to ESC_CALIBRATION 2015-07-13 09:33:37 +09:00
Randy Mackay 1a911553eb Copter: allow disabling ESC calibration 2015-07-13 09:33:35 +09:00
Randy Mackay 764fa36716 Copter: log ERR when compass, baro unhealthy 2015-07-12 22:11:35 +09:00
Randy Mackay 2b4aaf2368 SITL: add vibe monitor and SIM_ACC2_RND to sitl 2015-07-12 16:50:30 +09:00
Paul Riseborough 8b4b0b9576 AP_NavEKF: Add accelerometer clip monitoring and isolation
Isolates an accelerometer that is clipping  and attempts to use the one that is clipping less.
2015-07-12 16:49:19 +09:00
Peter Barker ec9be695fb LogAnalyzer: don't die if no arm/disarm eveents 2015-07-10 19:00:22 +10:00
Peter Barker 1dba943a10 LogAnalyzer: if no GPS, try GPS2 2015-07-10 19:00:22 +10:00
Peter Barker ce558b2b98 LogAnalyzer: cope with TimeUS
See also: 177f61656f
2015-07-10 19:00:22 +10:00
Staroselskii Georgii 72820303d4 AP_HAL_Linux: set higher SPI speed for Navio
We can set a higher speed on newer Linux kernels since
52469b2a38.
The older ones will just floor the value.
2015-07-10 18:59:18 +10:00
Jason Martens a08d57149e LogAnalyser: Add double support to DataflashLog.py
Doubles were added to dataflash in commit 3991e0c476.
2015-07-10 18:58:11 +10:00
Peter Barker 0028910428 AP_InertialNav: take reference to variable we are trying to update
There are no callers to this function.  Perhaps it should be removed?
2015-07-10 18:56:20 +10:00
Peter Barker 818bb3f88f Tools: correct array-out-of-bounds in PRU test 2015-07-10 18:56:20 +10:00
Peter Barker dbbc5ed816 Replay: fix double-free in MsgHandler 2015-07-10 18:56:20 +10:00
Andrew Tridgell 4e0c2c5a9b AP_HAL: defined default log and terrain directories for bebop
the /var filesystem is wiped on boot on Bebop. Use these as a
temporary workaround
2015-07-10 16:46:31 +10:00
Andrew Tridgell 6df33dd3f4 AP_InertialSensor: fixed MPU6000_SPI bus initialisation
we need _spi for get_semaphore()
2015-07-10 16:46:30 +10:00
Andrew Tridgell 266857c595 Plane: avoid linking optflow on APM2
not used, just taking memory
2015-07-10 16:46:30 +10:00
Julien BERAUD 954ec71630 HAL_Linux: added rcout implementation for bebop 2015-07-10 16:46:30 +10:00
Julien BERAUD 51c3c499e2 AP_Compass: support AK8963 on I2C 2015-07-10 16:46:30 +10:00
Julien BERAUD 0b41da0dea AP_Compass: rework to make the bus generic for AK8963
Supporting only MPU9250, prepare to implement another bus, i.e i2c on the
bebop
2015-07-10 16:46:29 +10:00
Julien BERAUD 0cd584c293 AP_Compass: fix rotation for bebop AK8963
Set the correct rotation for bebop
2015-07-10 16:46:29 +10:00
Julien BERAUD 7dd0b5fae6 AP_Compass: removed _spi_sem and _spi 2015-07-10 16:46:29 +10:00
Julien BERAUD d407737434 AP_Baro: added MS5607 support 2015-07-10 16:46:29 +10:00
Julien BERAUD 3cf952d1f8 AP_InertialSensor: add fifo support for MPU6000
And remove the use of data rdy in this case
2015-07-10 14:24:09 +10:00
Julien BERAUD 8a76ff53bd AP_InertialSensor: add i2c bus driver for MPU6050 2015-07-10 14:24:09 +10:00