Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
33,381 Commits 71 Branches 509 Tags 716 MiB
Commit Graph

41 Commits

Author SHA1 Message Date
Andrew Tridgell 55e362e470 AP_HAL_ChibiOS: Fix FMUv2 LED lighting up 2019-01-14 12:22:47 +11:00
Andrew Tridgell 8a23a21383 HAL_ChibiOS: fixed mRoX21 IMU setup 2018-07-12 11:44:27 +10:00
Randy Mackay 734e61e80d AP_HAL_ChibiOS: reduce default BRD_PWM_COUNT to 4 for fmv3 
also default relay pins to use aux out 5 and 6
 2018-07-11 14:02:55 +09:00
Andrew Tridgell d1caa86e12 HAL_ChibiOS: adjust DMA priorities for fmuv3 2018-06-06 07:15:41 +10:00
Michael du Breuil 3a62bca7d0 AP_HAL_ChibiOS: Make redefined pins an error, fix FMUv3 2018-05-25 09:57:18 +10:00
Andrew Tridgell 3749480dd8 HAL_ChibiOS: create ap_romfs_embedded.h 
use ROMFS keywork for romfs files
 2018-04-17 08:44:44 +10:00
Andrew Tridgell b4aeffbaed HAL_ChibiOS: added power status flags reporting 2018-04-09 15:32:04 +10:00
Andrew Tridgell 9b22e0b7cc HAL_ChibiOS: fixed SPI rates on fmuv3 
this fixes a SPI bandwidth issue on PH2.1 with 3 IMUs active
 2018-04-07 09:10:29 +10:00
Andrew Tridgell 67bae2669b HAL_ChibiOS: enable serial5 on fmuv3 2018-04-07 09:10:29 +10:00
Andrew Tridgell 93111dc0b1 HAL_ChibiOS: ensure that IO UART gets DMA 2018-04-07 09:10:29 +10:00
Andrew Tridgell 961a97a8c9 HAL_ChibiOS: expand docs on STDOUT_SERIAL 2018-03-02 21:46:23 +11:00
Andrew Tridgell 0cd6c9e5fb HAL_ChibiOS: added commented block on enable debug for builds 2018-03-02 21:39:38 +11:00
Andrew Tridgell 74ed19f460 HAL_ChibiOS: moved more board setup into hwdef.dat 2018-03-02 12:52:50 +11:00
Andrew Tridgell ebbd15ea17 HAL_ChibiOS: auto-enable CAN when pins are defined 2018-03-02 12:52:50 +11:00
Andrew Tridgell 11cfa5fd01 HAL_ChibiOS: correct LSM9DS0 bus IDs to match HAL_PX4 2018-02-19 15:49:32 +11:00
Andrew Tridgell 4d0c3b6581 HAL_ChibiOS: added pixartPC15 SPI device for SPI01 2018-02-14 18:27:00 +11:00
Andrew Tridgell 427e00dd41 HAL_ChibiOS: switched to system timer for AP_HAL::micros() 
this uses the ChibiOS system timer instead of a separate GPT timer for
the core ChibiOS timer. The advantage is it saves us a timer, plus it
changes ChibiOS to use a 1MHz clock on its timer, which gives us
higher resolution for delays.

This has a remarkable effect on timing jitter, reducing it greatly
 2018-02-14 18:27:00 +11:00
Andrew Tridgell f357eec78b HAL_ChibiOS: added more comments in hwdef.dat 2018-02-14 18:27:00 +11:00
Andrew Tridgell 9a95737d7d HAL_ChibiOS: added lots of comments to FMUv3 hwdef.dat 
this should help for developers of new boards
 2018-02-14 18:27:00 +11:00
Mark Whitehorn 6baad37e47 AP_HAL_ChibiOS: add ICM208060-am to SPI device table in fmuv3/hwdef.dat 2018-02-11 14:55:23 +11:00
Mark Whitehorn 3a40ba1d3e AP_HAL_ChibiOS: add buzzer support to hwdef.dat for fmuv3 2018-02-11 14:55:23 +11:00
Andrew Tridgell aae1cc22f4 HAL_ChibiOS: updated USB device strings 
use defaults or add in serial number
 2018-02-07 20:33:45 +11:00
Andrew Tridgell fa96e23552 HAL_ChibiOS: setup correct volt and current pins 
use hwdef.dat to specify battery pins
 2018-02-07 20:33:45 +11:00
Siddharth Purohit 6f21c1583f HAL_ChibiOS: add definitions to support uavcan in fmuv3 2018-02-07 20:33:45 +11:00
Andrew Tridgell a5bafb399f HAL_ChibiOS: adjust SPI pin speeds 2018-02-07 20:33:45 +11:00
Andrew Tridgell 7b251c9739 HAL_ChibiOS: lower FRAM CS speed to 2MHz 
this matches old firmware
 2018-01-20 17:40:07 +11:00
Andrew Tridgell 30fd2da108 HAL_ChibiOS: enable RTSCTS and SBUS_OUT 2018-01-20 17:40:07 +11:00
Andrew Tridgell 25f13ed518 HAL_Chibios: adjust MPU9250 clock speed down 
this helps with fast sampling enabled
 2018-01-20 17:40:07 +11:00
Andrew Tridgell dd59a5ff57 HAL_ChibiOS: adjust external bus clock for mpu9250 
this fixes an issue with fast sampling on the PH2.1 cube
 2018-01-20 17:40:07 +11:00
Andrew Tridgell e120e912f1 HAL_ChibiOS: moved board defines to hwdef.dat 2018-01-15 11:46:02 +11:00
Andrew Tridgell cde930f5c8 HAL_ChibiOS: added skyviper-v2450 hwdef config 2018-01-15 11:46:02 +11:00
Andrew Tridgell 867e7ebf71 HAL_ChibiOS: auto-generate GPIO table from hwdef.dat 2018-01-15 11:46:02 +11:00
Andrew Tridgell fbe8166c71 HAL_ChibiOS: auto-generate AnalogIn pin table 2018-01-15 11:46:02 +11:00
Andrew Tridgell bae9469af7 HAL_ChibiOS: use a common makefile and board.c 
allow for custom files per board if supplied, but don't require them
for every board
 2018-01-15 11:46:02 +11:00
Andrew Tridgell c639708e22 HAL_ChibOS: auto-generate full PWM config 
use PWM markers in hwdef.dat to mark each PWM channel
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 48d2704cf4 HAL_ChibiOS: CS pins don't need to be a single SPI BUS 
its possible to use a CS pin on different buses, so they should not
have a particular bus tag
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 58796ff435 HAL_Chibios: moved SPI device tables to hwdef.dat 2018-01-15 11:46:02 +11:00
Andrew Tridgell d1f93cd66c HAL_Chibios: auto-generate I2C, SPI and UART device lists 
this is less error prone and make a port faster as more information is
in hwdef.dat
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 2646b9ef33 HAL_Chibios: matched debug port speed to NuttX 2018-01-15 11:46:02 +11:00
Andrew Tridgell c3435e45c5 HAL_ChibiOS: initial port to FMUv4 2018-01-15 11:46:02 +11:00
Andrew Tridgell 8b6bab7b17 HAL_Chibios: added ChibiOS HAL 
this is based on initial work by Sid, reset here for easier merging
 2018-01-15 11:46:02 +11:00