Andrew Tridgell
2684f46641
HAL_ChibiOS: fixed IMU orientation for revo-mini
2018-04-30 08:33:39 +10:00
Alexander Malishev
1fd52c4e01
HAL_ChibiOS: added input capture filter
2018-04-28 07:31:58 +10:00
Alexander Malishev
0d6043e0c6
HAL_ChibiOS: Fixed current and voltage sense on OmnibusF4PRO
2018-04-26 07:57:06 +10:00
Andrew Tridgell
bba8d506d6
HAL_ChibiOS: port for kakutef4 flight board
2018-04-24 08:03:46 +10:00
Andrew Tridgell
95108a2d2c
HAL_ChibiOS: added support for 16 bit timers
2018-04-24 08:03:46 +10:00
Alexander Malishev
03d88b01be
HAL_ChibiOS: added support for interrupt based rcin parsing
2018-04-24 08:03:46 +10:00
malcolm churn
7718196838
HAL_ChibiOS: Fix sparky2 target.
...
Correct pin mappings, ADC, PWM.
Not working
Flash memory, Logging, external i2c tested with NXP MAG3110.
2018-04-22 21:01:14 +10:00
Andrew Tridgell
bb0cbd15a4
HAL_ChibiOS: implement fmuv4 safety state
...
and added safety_mask and safety_pwm support for both fmuv3 and fmuv4
2018-04-17 10:14:01 +10:00
Andrew Tridgell
77c922e6b8
HAL_ChibiOS: make embed.py work with python3
2018-04-17 08:44:44 +10:00
Andrew Tridgell
3749480dd8
HAL_ChibiOS: create ap_romfs_embedded.h
...
use ROMFS keywork for romfs files
2018-04-17 08:44:44 +10:00
Alexey Kozin
f87cc4e172
f4by chibios new style dma table build fix
2018-04-16 07:50:34 +10:00
mirkix
a9449ccd29
AP_HAL_ChibiOS: add f767-min board support
2018-04-15 07:40:46 +10:00
kozinalexey
2316fee279
HAL_ChibiOS: f4by conf2 fixed ram size, ext compass, pwm count
2018-04-14 11:09:34 +10:00
Alexander Malishev
ca33ff04d9
ChibiOS: add support for omnibusf4pro board
2018-04-14 09:25:15 +10:00
Alexander Malishev
79b5719419
ChibiOS: add support for complementry output timer channels
2018-04-14 09:25:15 +10:00
Alexander Malishev
1b7eecdf2f
ChibiOS: fixed tables for F405 mcu
2018-04-14 09:25:15 +10:00
mirkix
8074361bb8
AP_HAL_ChibiOS: add hardware def for STM32F767xx
2018-04-12 14:19:40 +10:00
Andrew Tridgell
c6d7691667
HAL_ChibiOS: fixed F745 database for new DMA system
2018-04-12 11:50:44 +10:00
Andrew Tridgell
7286ffab77
HAL_ChibiOS: define FLASH_LOAD_ADDRESS in hwdef.h
...
used for bootloader support
2018-04-12 11:50:44 +10:00
Andrew Tridgell
e4ce2f532b
HAL_ChibiOS: make smaller builds possible
...
this allows for much smaller builds when you disable a lot of
options. This is part of an effort to create a bootloader of less than
16k using ChibiOS
2018-04-12 11:50:44 +10:00
Andrew Tridgell
ef9d9d9c26
HAL_ChibiOS: first boot of OMNIBUSF7V2
...
only the 20608 works, and it has lots of errors.
The bmp280 is detected, but does not give good data
no UARTs yet
2018-04-12 11:50:44 +10:00
Andrew Tridgell
02f20b4114
HAL_ChibiOS: first version of OMNIBUSF7V2 board support
...
first F7 based board
2018-04-12 11:50:44 +10:00
Andrew Tridgell
a9edbb6b2d
HAL_ChibiOS: allow for a defaults.parm file in hwdef directory
...
this keeps defaults with the board, where that is appropriate
2018-04-12 11:50:44 +10:00
Andrew Tridgell
6e5cbc7c3d
HAL_ChibiOS: initial support for F745 boards
2018-04-12 11:50:44 +10:00
Andrew Tridgell
551dca63e1
HAL_ChibiOS: added build information for each MCU
...
this abstracts the build information for each MCU, so that hwdef.dat
can control the build process of ChibiOS
2018-04-12 11:50:44 +10:00
Andrew Tridgell
d1e4185817
HAL_ChibiOS: don't build flash.c if not needed
2018-04-12 11:50:44 +10:00
Andrew Tridgell
cdbbceb6b6
HAL_ChibiOS: cope with SDMMC peripheral for microSD
2018-04-12 11:50:44 +10:00
Andrew Tridgell
751024f483
HAL_ChibiOS: mark two skyviper builds as needing abin files
2018-04-11 15:09:49 +10:00
Andrew Tridgell
f2df171fdd
HAL_ChibiOS: fixed DSM input on fmuv4
2018-04-10 17:22:21 +10:00
Andrew Tridgell
b4aeffbaed
HAL_ChibiOS: added power status flags reporting
2018-04-09 15:32:04 +10:00
Andrew Tridgell
7c85d06600
HAL_ChibiOS: setup pwm counts, and cleanup mindpx-v2 PWM lines
2018-04-09 15:32:04 +10:00
Andrew Tridgell
9b22e0b7cc
HAL_ChibiOS: fixed SPI rates on fmuv3
...
this fixes a SPI bandwidth issue on PH2.1 with 3 IMUs active
2018-04-07 09:10:29 +10:00
Andrew Tridgell
751c3a554a
HAL_ChibiOS: added fmuv4-beta hardware definition
...
for an old pixracer quad I have (and I believe Peter has one too)
2018-04-07 09:10:29 +10:00
Andrew Tridgell
692f22c17f
HAL_ChibiOS: added GPIO assignments for revo-mini
2018-04-07 09:10:29 +10:00
Andrew Tridgell
67bae2669b
HAL_ChibiOS: enable serial5 on fmuv3
2018-04-07 09:10:29 +10:00
Andrew Tridgell
382772d999
HAL_ChibiOS: initial support for ESC serial output
2018-04-07 09:10:29 +10:00
Andrew Tridgell
93111dc0b1
HAL_ChibiOS: ensure that IO UART gets DMA
2018-04-07 09:10:29 +10:00
Andrew Tridgell
95a261e061
HAL_ChibiOS: don't generate DMA channels for ALARM pin
2018-04-07 09:10:29 +10:00
Andrew Tridgell
610a6a6c88
HAL_ChibiOS: optimise USB config driver
2018-04-07 09:10:29 +10:00
Andrew Tridgell
bc32276966
HAL_ChibiOS: support DShot output
...
use DMAR burst DMA to minimise number of DMA channels needed
thanks to betaflight for the great reference implementation!
2018-04-07 09:10:29 +10:00
Andrew Tridgell
294aac6955
HAL_ChibiOS: fixed CTS pulldown
...
we need to pulldown to prevent delays in uart sends
2018-04-07 09:10:29 +10:00
Andrew Tridgell
64278f07d3
HAL_ChibiOS: removed the DMA channels from RCIN in hwdef.dat
...
no longer needed as this is automatic now
2018-04-07 09:10:29 +10:00
Andrew Tridgell
9a5df6d1f7
HAL_ChibiOS: auto-generate DMA channels for RCIN
...
and add DMA channels for TIMx_UP ready for DMAR based DShot support
2018-04-07 09:10:29 +10:00
Andrew Tridgell
6aff7ecbf5
HAL_ChibiOS: added channel numbers for STM32F4xx MCUs
2018-04-07 09:10:29 +10:00
Andrew Tridgell
da2e79130b
HAL_ChibiOS: generate channel numbers in DMA tables
2018-04-07 09:10:29 +10:00
Tom Pittenger
b864cd6ae6
AP_HAL_ChibiOS: include correct wrappers
2018-04-03 08:27:44 +10:00
Andrew Tridgell
c311599e0a
HAL_ChibiOS: make DEFAULT_PARAMETERS relative to source root
2018-03-24 16:12:10 +11:00
kozinalexey
5df2b1a3ac
chibios hal config for F4BY
2018-03-24 06:39:09 +11:00
Peter Barker
2efd9341cd
AP_HAL_ChibiOS: copy the common linker script to outdir, use it from there
...
The directory we write the linker script to might not have the correct relative path to reference this common.ld script. So make it reference common.ld in the current directory and copy common.ld to the output directory
2018-03-23 11:06:24 +11:00
Andrew Tridgell
fd6185be0f
HAL_ChibiOS: fixed python3 pickle error
2018-03-05 09:50:27 +11:00