Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
52,501 Commits 71 Branches 509 Tags 756 MiB
Commit Graph

73 Commits

Author SHA1 Message Date
Andy Piper ed952a0ea0 AP_HAL_ChibiOS: allow flash to be write-protected/unprotected on reboot 
control protection support via HAL_FLASH_PROTECTION
provide support for flash protection on SPRacingH7
SPRacingH7 bootloader needs to use w25q-dtr
 2022-02-24 10:19:07 +11:00
Andrew Tridgell 638e20a0b9 HAL_ChibiOS: bring in hal.h where it is needed 2022-02-22 12:13:19 +11:00
Andrew Tridgell fc6a82de1b AP_HAL_ChibiOS: support up to 9 UARTs 2021-11-22 22:48:59 +11:00
bugobliterator 418ac60373 AP_HAL_ChibiOS: disable watchdog when DISABLE_WATCHDOG is defined 2021-11-05 07:38:43 +11:00
Siddharth Purohit 28dbbc2bc4 AP_HAL_ChibiOS: do not even initialise empty qspi driver 2021-06-30 19:33:17 +10:00
Siddharth Purohit abc26d1993 AP_HAL_ChibiOS: add QSPI Device Driver in HAL 2021-06-30 19:33:17 +10:00
Dr.-Ing. Amilcar do Carmo Lucas fc7e242bae AP_HAL_ChibiOS: Fix typo (NFC) 2021-05-21 09:43:10 +10:00
Andrew Tridgell 88e277420f AP_HAL_ChibiOS: removed assert calls 
these waste flash space and do not do us any good
 2021-03-25 14:03:40 +11:00
Andy Piper e1d71486e4 AP_HAL_ChibiOS: build fixes for ChibiOS 20.3.x 2021-03-23 12:01:20 +11:00
Andrew Tridgell 243cf2199d HAL_ChibiOS: disable shared DMA on IOMCU 
this saves about 600 bytes of ram
 2021-02-24 18:21:08 +11:00
Andrew Tridgell 5c823debc0 HAL_ChibiOS: support saving persistent parameters to bootloader sector 
when we flash the bootloader we can save key peristent parameters to
the end of the bootloader sector, allowing them to persistent across
changes of firmware type

This allows for factory temperature calibration
 2021-01-21 13:09:21 +11:00
Andy Piper 07f199ea1a AP_HAL_ChibiOS: rename system_initialized() and add is_system_initialized() 2020-12-30 18:16:59 +11:00
Andrew Tridgell bf546f363d HAL_ChibiOS: don't init serial 1 and 3 
these should not be treated as special. Initialising them early just
wastes memory if the end up not being used
 2020-12-15 10:32:46 +11:00
Andrew Tridgell e54fc4b0de AP_HAL_ChibiOS: convert to using hal.serial() instead of hal.uartX 2020-12-15 10:32:46 +11:00
Andrew Tridgell 3ba46d5bd9 HAL_ChibiOS: enable reporting of watchdog reset on AP_Periph 2020-12-01 11:14:50 +11:00
Andrew Tridgell 4d171ec19a AP_HAL_ChibiOS: support uartI, allowing a total of 9 uarts 
this allows for OTG2 on the MatekH743 board, which makes SLCAN much
easier
 2020-11-30 14:09:31 +11:00
Andrew Tridgell 280e9d1c41 HAL_ChibiOS: fixed bootloader build 2020-11-10 16:15:45 +11:00
Andrew Tridgell ac566763fe HAL_ChibiOS: disable loop delay on replay 2020-11-10 16:15:45 +11:00
Siddharth Purohit cdf8e369f1 AP_HAL_ChibiOS: create UAVCAN agnostic CANIface driver 
HAL_ChibiOS
 2020-08-19 17:31:09 +10:00
Peter Barker 48da4e523c AP_HAL_ChibiOS: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
Andrew Tridgell 0ef66659ce HAL_ChibiOS: log WDOG message once a second 
this copes with delayed mounting of the microSD, making it much more
likely we log the critical data
 2020-04-29 07:36:55 +10:00
Andrew Tridgell c61cecdbc7 HAL_ChibiOS: report thread name in watchdog 2020-04-29 07:36:55 +10:00
Peter Barker 9ba2aecbb8 AP_HAL_ChibiOS: send statustext at regular intervals after watchdog reset 2020-03-31 14:30:11 +11:00
Peter Barker a59c3670c8 AP_HAL_ChibiOS: stash lr_thd in watchdog hardfault handler 2020-03-19 16:03:58 +11:00
Andy Piper 3d0cf7e12a AP_HAL_ChibiOS: hardware M4-Cortex and M7-Cortex (and H7) implementation of HAL FFT abstraction 
implements an FFT engine based on the betaflight feature using ARM hardware accelerated CMSIS library
make the FFT feature optional
add dynamic gyro windows
add quinns and candans estimators and record in DSP state
disable DSP for boards with limited flash
calculate power spectrum rather than amplitude
start/analyse version of analysis to support threading
allocate memory in a specific region
constrain window size by CPU class
control inclusion of DSP based on board size
 2020-02-22 11:15:37 +11:00
Andrew Tridgell e8ab35a192 HAL_ChibiOS: fixed stdout in early startup bug 
this caused a failure to boot on some boards if they tried to print
messages in early startup code before hal was initialised

thanks to @Shadowru for reporting the issue
 2020-02-12 13:51:10 +11:00
Mirko Denecke b84dcd483d AP_HAL_ChibiOS: remove unnecessary tabs and whitespaces 2019-10-21 08:01:56 +11:00
Andrew Tridgell 63f39c2bd6 HAL_ChibiOS: fixed build of iomcu firmware 2019-08-27 10:29:56 +10:00
Andrew Tridgell 16bdaaa1af HAL_ChibiOS: added support for STM31F10x for AP_Periph 2019-08-27 10:29:56 +10:00
Andrew Tridgell 12dd33ac2b HAL_ChibiOS: added logging of hardware fault information in watchdog 
this may help trackdown software bugs that trigger hard faults
 2019-07-19 16:02:41 +10:00
Andrew Tridgell 2d5e4dcfa2 HAL_ChibiOS: fixed SemLine data in WDOG msg 
semline was being overwritten in the setup() call
 2019-07-15 08:08:54 +10:00
Andrew Tridgell 0075b96f3a HAL_ChibiOS: added uartH 2019-07-12 17:01:21 +10:00
Peter Barker f5190d1bcc AP_HAL_ChibiOS: use logger().WriteCritical(...) for WDOG message 2019-05-16 17:21:24 +10:00
Andrew Tridgell 0708b65c2d AP_HAL_ChibiOS: added const for PersistentData 2019-05-15 15:33:48 +10:00
Andrew Tridgell 8d0bca6ba9 HAL_ChibiOS: log mavlink IDs and semaphore lines for watchdog 
this gives a better chance of tracking down a hang
 2019-05-15 15:33:48 +10:00
Andrew Tridgell e3c80bf08f HAL_ChibiOS: fixed bootloader build 2019-05-15 15:33:48 +10:00
Andrew Tridgell d7a0eb42ee HAL_ChibiOS: added logging of watchdog data 
log MON msgs in the leadup to a watchdog, and log a WDOG message after
a watchdog reset
 2019-05-15 15:33:48 +10:00
Andrew Tridgell dbfe6b8019 HAL_ChibiOS: implement persistent_data for watchdog 
this is a much simpler approach to persistent data
 2019-05-15 15:33:48 +10:00
Andrew Tridgell 0461692ea5 HAL_ChibiOS: enable watchdog on IOMCU 2019-04-22 16:53:35 +10:00
Andrew Tridgell 2476927048 HAL_ChibiOS: don't call internalerror for iomcu 2019-04-22 16:53:35 +10:00
Andrew Tridgell 63d21d995a HAL_ChibiOS: setup watchdog_reset internal error 2019-04-22 16:53:35 +10:00
Andrew Tridgell 54cbf8ea9e HAL_ChibiOS: change to 2s timeout on watchdog 
a bit more of a safety net against false positives for stable release
 2019-04-22 16:53:35 +10:00
Andrew Tridgell 19526b5826 HAL_ChibiOS: implement scheduler->expect_delay_ms() 2019-04-22 16:53:35 +10:00
Andrew Tridgell 8100c71a96 HAL_ChibiOS: added commented out test code for watchdog 2019-04-22 16:53:35 +10:00
Andrew Tridgell 272c277056 HAL_ChibiOS: use BRD_OPTIONS to enable watchdog 2019-04-22 16:53:35 +10:00
Andrew Tridgell c09df1ea7b HAL_ChibiOS: added IWDG watchdog support 
this resets the MCU if the main loop stops for 1 second
 2019-04-22 16:53:35 +10:00
Andrew Tridgell 006583d812 HAL_ChibiOS: fixed iomcu build with flash driver 2019-04-11 13:22:53 +10:00
Andrew Tridgell 36f7116054 HAL_ChibiOS: implement flash driver 2019-04-11 13:22:53 +10:00
Andrew Tridgell bd47aba5ca HAL_ChibiOS: reduced delay time in main loop to 50us 
this allows for faster loop rates, and seems to be enough in testing
 2019-02-26 16:18:26 +11:00
Andrew Tridgell 24f6d6d647 HAL_ChibiOS: support microSD slowdown 
allow use of BRD_SD_SLOWDOWN to slow down clock on microSD
 2018-12-31 08:00:14 +11:00