Peter Barker
90b2a2acaa
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
...
... and use a default value for peripherals
2024-07-30 10:52:36 +10:00
Peter Barker
5fb4e1e285
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
2024-04-03 18:36:29 +11:00
Peter Barker
994c268644
AP_HAL_ChibiOS: replace HAL_NO_RCIN_THREAD w/HAL_RCIN_THREAD_ENABLED
2024-04-03 18:36:29 +11:00
Peter Barker
416f7d393a
hwdef: remove DISABLE_SERIAL_ESC_COMM AP_Periph boilerplate
...
... use the defaults file instead
2024-04-02 11:28:27 +11:00
Peter Barker
1d4e0a784c
AP_HAL_ChibiOS: rename GPS_ to GPS1_
2024-03-19 19:50:12 +11:00
Andrew Tridgell
ea51aea2e5
hwdef: removed most CAN_APP_NODE_NAME defines
...
both bootloader and AP_Periph now default to
"org.ardupilot.BOARD_NAME". This makes it much easier to find the
right firmware for update
2023-09-06 11:21:51 +10:00
Andrew Tridgell
fb5dba9d86
hwdef: disable HAL_USE_CAN on all boards except f103-periph
...
setting HAL_USE_CAN uses the ChibiOS CAN driver instead of the AP_HAL
CAN driver. This is only used on the f103-periph as it significantly
reduces the size of the bootloader, which allows for f103 builds to
fit in the limited flash
on all other builds we are much better off using the HAL CAN driver as
it is much faster
2023-09-06 11:21:51 +10:00
Peter Barker
a647cd9b8f
hwdef: remove redundant 'define HAL_MINIMIZE_FEATURES 0'
2022-07-05 10:20:38 +10:00
Andrew Tridgell
281f041abb
hwdef: fixed debug pins on two boards bootloaders
2021-12-28 10:31:25 +11:00
Peter Barker
139c460fa5
hwdef: remove unused define NO_DATAFLASH
2021-11-24 18:18:06 +11:00
bugobliterator
8651d99de6
HAL_ChibiOS: move to using parameter STORAGE_FLASH_PAGE instead of define
2021-10-30 19:24:57 +11:00
Andrew Tridgell
80836ca1d9
HAL_ChibiOS: simplify AP_Periph hwdef.dat
2021-10-26 15:56:53 +11:00
Andrew Tridgell
68146d541c
HAL_ChibiOS: removed boilerplate lines from bootloaders
2021-10-26 15:56:53 +11:00
Andrew Tridgell
822e657a70
HAL_ChibiOS: increase PROCESS_STACK on several boards
...
use min of 0xA00 for AP_Periph. A larger stack is needed for parameter
fetching
2021-10-20 19:06:35 +11:00
Peter Barker
1bd62362a4
AP_HAL_ChibiOS: move from HAL_NO_GCS to HAL_GCS_ENABLED
2021-09-22 21:37:00 +10:00
Peter Barker
31ef6db937
AP_HAL_ChibiOS: remove redundant HAL_LOGGING_ENABLED from AP_Periph hwdefs
2021-05-19 17:38:47 +10:00
Peter Barker
7d8c5757d6
AP_HAL_ChibiOS: move from HAL_NO_LOGGING to HAL_LOGGING_ENABLED
2021-05-19 17:38:47 +10:00
Michael du Breuil
c0da87c066
AP_HAL_ChibiOS: Update HitecMosaic to reflect changes to GPS config
2021-02-15 16:31:45 -07:00
Michael du Breuil
623951a262
AP_HAL_ChibiOS: Add some extra GPS SBF config
2021-02-05 11:52:29 -07:00
Andrew Tridgell
d81c2ee407
HAL_ChibiOS: allow for some embedded parameters on AP_Periph builds
2021-01-21 06:19:46 +11:00
Andrew Tridgell
b1e7b508db
HAL_ChibiOS: added HitecMosaic
2020-12-06 16:48:08 +11:00