Jason Short
9a30270879
System.pde - RTL
...
removed Approach mode, fixed RTL to loiter until desired altitude is reached
2012-07-01 13:40:12 -07:00
Andrew Tridgell
82ede937e7
AnalogSource: convert analogRead() calls to the new API
...
this should give us much better analog values, plus save a bunch of
CPU time
2012-07-01 15:01:05 +10:00
Jason Short
031830b5fe
System.pde: Toy mode details for set_mode()
2012-06-29 21:20:28 -07:00
Jason Short
cd93c40f09
Added Toy Mode control
2012-06-25 23:08:25 -07:00
Jason Short
8b212d8baa
Adjustments to the Inertial_nav
...
lowered Rate_I and Rate_P to be less jumpy. raised throttle_p
added a clear to rate when entering loiter
moved the raw reporting
2012-06-20 08:47:47 -07:00
Andrew Tridgell
940d994efb
GPS: Use appropiate GPS_ENGINE settings in APM, ACM and rover
2012-06-10 16:36:18 +10:00
Andrew Tridgell
a684bddbda
GPS: open the GPS serial port with a 256 byte buffer
...
the UBLOX needs more than 128 bytes for reliable parsing
2012-06-08 16:42:03 +10:00
Jason Short
71f80f3a77
Bug fix: When adjusting altitude, RTL then land will fail unless this var is reset to false.
2012-06-03 22:25:27 -07:00
Jason Short
0ce883b96a
Removed unused variable
2012-05-29 12:43:23 -07:00
Jason Short
5754f97433
reversed circle_WP calculation so the next_WP refers to the destination around the circle and circle_WP refers to the center. The intent is to make it easier to see via ground station.
2012-05-27 09:21:20 -07:00
Robert Lefebvre
c8fb9a6635
More CopterLEDS changes.
...
Merged CopterLEDS and Piezo functions to eliminate pin conflict on APM2. Created new Parameter bit to turn piezo function on and off from MP. Moved GPS and Aux pin assignments to allow commonality between APM1 and 2. Set LED_Mode parameter default to 9 in order to make CopterLEDS completely backwards compatible with old Motor LEDS and Piezo code. Legacy users should see no difference.
2012-05-15 12:00:21 -04:00
Adam M Rivera
0c3d6614cd
system.pde: Updated param name to loiter_timer.
2012-04-16 10:12:30 -05:00
Adam M Rivera
a2b338c052
System: Added handler for the new APPROACH flight mode which will initiate an approach to a target alt as defined by the user.
2012-04-15 16:55:34 -05:00
rmackay9
c337df11c8
ArduCopter - LEDS - set new output pins to OUTPUT to support COPTER_LEDS.
...
Code by Robert Lefebvre
2012-04-12 22:55:40 +09:00
rmackay9
1d086c83f0
ArduCopter - system.pde - changed references to "motor_armed" to "motors.armed()" as part of the move to use AP_Motors library.
2012-04-04 23:03:21 +09:00
Andrew Tridgell
b4107d35e8
MAVLink: raise the serial transmit buffer size to 256 bytes
...
the 128 byte serial transmit buffer was causing significant problems
with queueing of mavlink messages. With 256 bytes we can fit a lot
more messages out in each pass of the code, which makes telemetry more
efficient
As we discussed on the dev call, we now have enough free ram for this
to be worthwhile
2012-03-30 17:46:20 +11:00
Andrew Tridgell
547b4ed55b
AHRS: adapt ArduCopter for new AHRS framework
2012-03-19 17:29:02 +11:00
Jason Short
fe7ca98701
ACM: system.pde - removed reset_nav_I() to consolidate the wind control reset.
2012-03-18 22:31:21 -07:00
Jason Short
f9d0dc9daa
ACM: disabled auto_calibration until more testing can be done
2012-03-10 12:44:49 -08:00
Jason Short
5ad7320505
ACM: changed alt hold initialization of altitude to be immediate
2012-03-10 12:44:18 -08:00
Andrew Tridgell
828ad7625b
ACM: removed the ADC filtering code
2012-03-10 10:34:32 +11:00
Andrew Tridgell
8393c0299b
ACM: removed the DCM tuning overrides
...
not needed now that DCM scales with deltat
2012-03-10 10:34:31 +11:00
Andrew Tridgell
7e4c8592ff
ACM: make it possible to build ArduCopter with quaternions
2012-03-10 10:34:29 +11:00
Andrew Tridgell
367947fd33
HWSTATUS: if we don't know the voltage, report it as zero
...
this will tell us if board_voltage() is really working
2012-03-10 10:34:28 +11:00
Andrew Tridgell
64cc04ae09
ACM: adjust yaw drift correction constants
...
this should give the compass a bit more authority
2012-03-10 10:34:28 +11:00
Jason Short
730476fdfd
ACM -
...
Implemented automatic ranging of Alt Hold gains. Works well in simulator and testing.
- alt hold estimation moved to 50 hz
- simple fixed observer calc for smooth and accurate climb rates useful for derivative calcs
- auto-reset of the I term by moving I value into throttle value. This recalcs the gain every 20seconds for battery drainage compensation in long flights.
- remove filtering for Nav_throttle
- added a way to lower the gain on nav_throttle for descents by / climb_rate error by 2 - seems to work OK and keeps copter from dropping like a rock when the Baro drifts quickly lower.
- removed old throttle hold set point code
- made throttle override for alt hold +- 200 vs 250
2012-03-06 22:22:14 -08:00
Andrew Tridgell
cb874d6097
ACM: added board_voltage()
2012-03-02 15:48:28 +11:00
Jason Short
eac77504a3
Added more Logging for PIDs.
2012-02-26 11:33:36 -08:00
Jason Short
f27e9f9ca1
added a simple rest of nav_throttle just in case
2012-02-25 13:31:21 -08:00
Jason Short
42b5d47f7b
commented out control mode debug print
2012-02-21 21:48:07 -08:00
Jason Short
336441b109
reset slow_WP option at mode switch
2012-02-19 13:13:42 -08:00
Jason Short
17c6c7b294
added extra gain logging
2012-02-16 22:09:22 -08:00
Andrew Tridgell
3b4cae3cc3
adapted main ACM code for AP_Param
2012-02-13 16:22:52 +11:00
Jason Short
8ae53bffd2
Made Yaw Hold universal for Acro
2012-02-10 22:32:55 -08:00
Andrew Tridgell
1a861b3de5
allow for lower serial baud rates
...
not many people will use less than 9600 baud, except for those wanting
to test extreme range radios, which is what I'm trying to do :-)
2012-02-04 19:07:18 +11:00
Michael Oborne
151479f769
fix issue 502
...
to identify quad over mavlink
2012-02-03 06:53:08 +08:00
Jason Short
7833cea9d4
2.2B6 - Please verify Heli still functions properly.
...
Added AC_PID lib
Updated landing code
bug fixes
2012-01-28 22:00:05 -08:00
Randy Mackay
122623f64b
OpticalFlow - added OF_LOITER flightmode
2012-01-28 09:27:16 +09:00
Jason Short
6784989e83
relocated reset_I term functions to central location
2012-01-20 22:52:30 -08:00
Jason Short
3ebed0b278
This allows users to test the Auto_throttle hold or cruise value
2012-01-14 11:43:52 -08:00
Jason Short
7877a872d3
added update throttle cruise function
2012-01-13 16:48:05 -08:00
Jason Short
a59c9ae22c
added notes
2012-01-12 22:28:58 -08:00
Jason Short
4b54887c6c
Switched to set_next_WP for mode switches
2012-01-10 23:43:44 -08:00
Jason Short
cf92631d33
added #if to wind compensation code
2012-01-10 23:42:26 -08:00
Randy Mackay
f68d23d91e
ArduCopter - added ROLL_PITCH_STABLE_OF (i.e. Stabilised Roll/Pitch + adjustments based on optical flow)
...
Removed optical flow from regular loiter for now until it's tested.
2012-01-09 13:53:54 +09:00
Jason Short
9c8122e061
converted auto land to use the mission planner version
...
Removed gate that looked for already set control_mode. Wasn't compatible with failsafe
2012-01-07 22:27:26 -08:00
Jason Short
98f9a5f237
Forced Faildafe throttle mode to throttle Auto
2012-01-06 10:21:50 -08:00
Jason Short
40ad164c8d
Clears Auto_land timer
2012-01-05 21:15:12 -08:00
Andrew Tridgell
df81a9459a
ACM: reset all I terms on gyro calibration
2012-01-05 10:15:14 +11:00
Jason Short
2e83e42764
Added precalc for wind compensation when entering Stabilze mode
2012-01-04 09:28:37 -08:00