Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
65,021 Commits 71 Branches 509 Tags 756 MiB
Commit Graph

44 Commits

Author SHA1 Message Date
Peter Barker 90b2a2acaa hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED 
... and use a default value for peripherals
 2024-07-30 10:52:36 +10:00
Peter Barker 5fb4e1e285 hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED 2024-04-03 18:36:29 +11:00
Peter Barker 994c268644 AP_HAL_ChibiOS: replace HAL_NO_RCIN_THREAD w/HAL_RCIN_THREAD_ENABLED 2024-04-03 18:36:29 +11:00
Peter Barker 416f7d393a hwdef: remove DISABLE_SERIAL_ESC_COMM AP_Periph boilerplate 
... use the defaults file instead
 2024-04-02 11:28:27 +11:00
Andy Piper c057cc5485 AP_HAL_ChibiOS: add get_output_mode() and use it to print correct banner for iomcu 
add support for undef of STM32 lines and DMA_NOMAP
add support for F103 running at 24Mhz
add f103 variants of iofirmware
reduce memory usage in iomcu for new model
correct pwm output reporting
split iofirmware into config + mcu to allow f103 definition
don't enable non-existant timers on F103
 2023-08-15 06:53:48 +10:00
Andy Piper 3c42f1b7d9 AP_HAL_ChibiOS: disable stack checking on iomcu 2023-08-15 06:53:48 +10:00
bugobliterator 9a21297cd1 AP_HAL_ChibiOS: add support for DShot on IOMCU 
set timer counter size to be a byte wide
use HAL_DSHOT_ENABLED instead of DISABLE_DSHOT
build iomcu-dshot from existing iomcu
correct defines for DMAR size on iomcu
allow iomcu dshot rate to be configured from FMU
correct DMA allocation for dshot on iomcu
allow debug builds on iofirmware
ensure dshot is enabled on iomcu dshot
support proper iomcu dshot output thread triggered by FMU
allow selective disablement of serial LEDs and passthrough
disable serial LEDs and passthrough on iomcu-dshot
propagate ESC telemetry to iomcu
dshot_send_groups() for iomcu
remove use of ICU on iomcu for dshot. only allocate possible DMA channels
rename serial passthrough and dshot defines
update dshot docs
resize dshot iomcu main stack to minimum
correct dshot prescaler usage and bit_width_mul calculation
use ChibiOS in tickless mode on iomcu-dshot so that virtual timers can be used
propagate dshot commands to iomcu
passthrough oneshot125 to iomcu
 2023-08-15 06:53:48 +10:00
Peter Barker 43f9f08b8f AP_HAL_ChibiOS: define accepted RC backends for IOMCU in its hwdef files 2023-05-03 19:06:33 +10:00
Peter Barker 926c7d64b1 AP_HAL_ChibiOS: add and use AP_BOOTLOADER_FLASHING_ENABLED 2023-04-26 22:55:36 +10:00
Peter Barker 349dd5089c AP_HAL_ChibiOS: replace NO_FASTBOOT with AP_FASTBOOT_ENABLED 2023-03-01 18:16:31 +11:00
Peter Barker a5cc8d6da3 AP_HAL_ChibiOS: specify AUTOBUILD_TARGETS for IOMCU 
... which is just the iofirmware target
 2022-11-06 12:58:18 +11:00
Peter Barker bb1c3d6545 AP_HAL_ChibiOS: use minimize_features.inc for HAL_WITH_DSP 2022-11-05 14:52:10 +11:00
Peter Barker dc8862822f AP_HAL_ChibiOS: remove unused HAL_RCIN_PULSE_PPM_ONLY define 2022-08-17 17:39:15 +10:00
Peter Barker 13b03f79db AP_HAL_ChibiOS: move from HAL_NO_SHARED_DMA to AP_HAL_SHARED_DMA_ENABLED 
This allows hwdef files to manipulate this value
 2022-07-19 18:02:26 +10:00
Peter Barker 0eacc0348e AP_HAL_ChibiOS: remove HAL_COMPASS_DEFAULT define 
this doesn't actually allow you to specify a default, despite the name
and a couple of hwdefs trying to use it that way.

This would have stopped being useful when we did the
compass-prority-table stuff - or before.
 2022-02-01 12:10:38 +11:00
Andrew Tridgell 47da7f5c9b HAL_ChibiOS: change RCIN FLOAT to PULLDOWN 
this lowers the chance of noise on a RCIN pin causing incorrect
protocol detection
 2021-10-12 11:52:36 +11:00
Peter Barker 7d8c5757d6 AP_HAL_ChibiOS: move from HAL_NO_LOGGING to HAL_LOGGING_ENABLED 2021-05-19 17:38:47 +10:00
Andrew Tridgell 243cf2199d HAL_ChibiOS: disable shared DMA on IOMCU 
this saves about 600 bytes of ram
 2021-02-24 18:21:08 +11:00
Andy Piper 94de238751 AP_HAL_ChibiOS: disable RCOUT thread on iomcu and rebuild iomcu. 2021-02-20 14:37:11 +11:00
Andrew Tridgell 32cdfddf12 HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER 
much easier to understand
 2020-04-28 10:32:23 +10:00
Andrew Tridgell e8b2b52bae HAL_ChibiOS: removed STM32_VDD from hwdef.dat 
use default
 2020-04-28 10:32:23 +10:00
Andy Piper 3d0cf7e12a AP_HAL_ChibiOS: hardware M4-Cortex and M7-Cortex (and H7) implementation of HAL FFT abstraction 
implements an FFT engine based on the betaflight feature using ARM hardware accelerated CMSIS library
make the FFT feature optional
add dynamic gyro windows
add quinns and candans estimators and record in DSP state
disable DSP for boards with limited flash
calculate power spectrum rather than amplitude
start/analyse version of analysis to support threading
allocate memory in a specific region
constrain window size by CPU class
control inclusion of DSP based on board size
 2020-02-22 11:15:37 +11:00
Andrew Tridgell 16bdaaa1af HAL_ChibiOS: added support for STM31F10x for AP_Periph 2019-08-27 10:29:56 +10:00
Siddharth Purohit a926effee5 hwdef: iomcu set pin mode to input for autodetecting heater control level 2019-06-08 14:31:01 +10:00
Andrew Tridgell d7a0eb42ee HAL_ChibiOS: added logging of watchdog data 
log MON msgs in the leadup to a watchdog, and log a WDOG message after
a watchdog reset
 2019-05-15 15:33:48 +10:00
Tom Pittenger 91b0650765 AP_HAL_ChibiOS: rename dataflash to logger 2019-03-28 16:40:58 +11:00
Andrew Tridgell a0c57979ab HAL_ChibiOS: use opendrain outputs for LEDs on iomcu 2018-11-07 07:35:45 +11:00
Andrew Tridgell a69f66eadd HAL_ChibiOS: ensure RCIN sigbuf has even number of words 
ObjectBuffer rounds up by 1, leaving an odd number of words, which
caused DSM RC input corruption
 2018-11-07 07:35:45 +11:00
Andrew Tridgell d18277487e HAL_ChibiOS: use RCIN pin for only PPM only on iomcu 
use uarts for SBUS and other serial protocols
 2018-11-07 07:35:45 +11:00
Andrew Tridgell 7c1ba15031 HAL_ChibiOS: fixed syntax error on RCIN pin for iomcu 2018-11-07 07:35:45 +11:00
Andrew Tridgell 86ab3d7669 HAL_ChibiOS: turn off green ring LED on cube 2018-11-07 07:35:45 +11:00
Andrew Tridgell fcc259ae31 HAL_ChibiOS: separate out F1 CR1 calculations 
and modify pin speeds for iomcu uarts
 2018-11-07 07:35:45 +11:00
Andrew Tridgell 7e66bb69b9 HAL_ChibiOS: enable amber LED on iomcu 2018-11-07 07:35:45 +11:00
Andrew Tridgell f69360844f HAL_ChibiOS: enable USART1 for iomcu for spektrum input 2018-11-07 07:35:45 +11:00
Andrew Tridgell 7e777d8b28 HAL_ChibiOS: disable loop() delay for iofirmware 2018-10-30 13:00:48 +11:00
Andrew Tridgell b3946fc458 HAL_ChibiOS: added uart for sbus out in IOMCU 2018-10-30 13:00:48 +11:00
Andrew Tridgell af4340d1d1 HAL_ChibiOS: enable analog input on IOMCU 2018-10-30 13:00:48 +11:00
Andrew Tridgell 7b67146bc4 HAL_ChibiOS: use less memory in SoftSigReader 2018-10-17 15:11:28 +11:00
Andrew Tridgell d083cd87d6 HAL_ChibiOS: disable debug code by default for iomcu 
use --enable-asserts instead
 2018-10-17 15:11:28 +11:00
Andrew Tridgell d7aaaa35bd HAL_ChibiOS: disable RCIN and timer threads for iomcu 2018-10-17 15:11:28 +11:00
Siddharth Purohit 8ac38d73f7 HAL_ChibiOS: add option for NO_FASTBOOT build and enable it for iomcu 2018-09-19 12:14:15 +10:00
Siddharth Purohit f9149f45b2 HAL_ChibiOS: explicitly mention if RTC not available 2018-09-19 12:14:15 +10:00
Siddharth Purohit 22f74b0827 HAL_ChibiOS: add option to set iomcu firmware environment var 2018-09-19 12:14:15 +10:00
Siddharth Purohit e824a9c360 HAL_ChibiOS: add hwdef files to support IOMCU 2018-09-19 12:14:15 +10:00