Andrew Tridgell
8a84dbc19e
GCS_MAVLink: slow down telemetry during ftp
2020-03-28 15:28:03 +11:00
Peter Barker
fbe2e75b9f
GCS_MAVLink: divide time allowed to send messages fairly
2020-02-27 08:49:59 +11:00
Peter Barker
727c12c388
GCS_MAVLink: move initialisation of serial and gcs to AP_Vehicle
2020-02-25 11:50:55 +11:00
Peter Barker
1650979a2b
GCS_MAVLink: add support for MAV_CMD_DEBUG_TRAP
2020-01-29 10:27:01 +11:00
Peter Barker
e248bdfb16
GCS_MAVLink: split statustexts into 50-byte chunks using mav2 extensions
2020-01-28 19:56:38 +11:00
Peter Barker
a9f62f196e
GCS_MAVLink: consolidate places we snprintf statustexts
2020-01-14 10:38:43 +11:00
Peter Barker
01710c035e
GCS_MAVLink: handle proximity and rangefinder messages
2019-12-24 12:08:54 +11:00
Andrew Tridgell
dd73eac08c
GCS_MAVLink: support MAV_CMD_FIXED_MAG_CAL_YAW
2019-12-18 17:20:37 +11:00
Peter Barker
ebbcd00873
GCS_MAVLink: send statustext to all GCSs until update_send is called
...
until update_send it called we don't mark channels as streaming, so
send_statustext won't send to that channel.
Calculating the streaming mask could have been done as part of the init
call, but this fix may allow for information getting to the user in the
case that the streaming parameters are all zero, too.
2019-12-18 14:36:58 +11:00
Peter Barker
b48da34c61
GCS_MAVLink: move setting of GPS SYS_STATUS bits up to base class
2019-12-05 13:02:19 +11:00
Peter Barker
314ea32ede
GCS_MAVLink: any internal error means MAV_STATE_CRITICAL
2019-11-27 14:27:53 +11:00
Marian Soban
6e961b55eb
GCS_MAVLink: LTM telemetry support
2019-11-26 12:14:13 +11:00
Peter Barker
a96a4c0510
GCS_MAVLink: correct encoding used for send_to_components
...
These have to be packed onto the channel - otherwise they may ge
tencoded as mavlink1 instead of mavlink2 (or vice-versa)
2019-11-26 12:10:12 +11:00
Peter Barker
7d2557b316
GCS_MAVLink: correct txspace return value issues
...
- checking of space in send_to_active_channels was incorrect - did not
take into account locked status of the channel
- corrected return value on comm_get_txspace - took a uint32_t, cast it
to int16_t, checked it for zero, then cast it to uint16_t on return.
That's just... odd.
2019-11-12 16:33:12 +11:00
Peter Barker
a893a5483c
GCS_MAVLink: support sysid targetting
2019-11-12 07:52:22 +08:00
Andrew Tridgell
43da68ae59
GCS_MAVLink: added ftp_push_replies()
2019-11-02 22:52:06 +11:00
Andrew Tridgell
00549d13fa
GCS_MAVLink: rename emit_dir_entry to gen_dir_entry
...
comment from Sid
2019-11-02 22:52:06 +11:00
Michael du Breuil
6f538dd45a
GCS_MAVLink: Initial FTP support
2019-11-02 22:52:06 +11:00
Michael du Breuil
cb1b236439
GCS_MAVLink: Use the vehicle singleton to directly set the flight mode
2019-10-25 08:48:22 +08:00
Randy Mackay
7ce2fb8783
GCS_Mavlink: handle_preflight_reboot made virtual
2019-10-15 07:41:44 +09:00
Do Carmo Lucas
dc4ad26e96
GCS_MAVLink: updates to support the latest stable mavlink changes (IMU temperature extension)
2019-10-10 13:23:03 +11:00
Randy Mackay
8686197c59
GCS_MAVLink: add comment above set-message-interval
2019-10-02 16:17:09 +09:00
Tatsuya Yamaguchi
9a99d9bff5
GCS_MAVLink: add set_message_interval functions
2019-10-02 16:09:44 +09:00
Andrew Tridgell
0deef76875
GCS_MAVLink: use HAL_MEM_CLASS for status sizes
2019-10-01 09:29:55 +10:00
Peter Barker
6d0c5da84a
GCS_MAVLink: allow upload of fence using mission item protocol
...
GCS_MAVLink: add support for fence inclusion circles
GCS_MAVLink: factor out a transfer_is_complete; start commenting properly
2019-09-28 07:58:48 +09:00
Peter Barker
2f60b230cd
GCS_MAVLink: use singleton to get AP_AdvancedFailsafe pointer
2019-09-17 09:13:43 +10:00
Peter Barker
8fc55b9678
GCS_MAVLink: remove comm_get_available
...
available returns an unsigned integer, so this was just weird
2019-09-10 15:45:27 +10:00
Peter Barker
df5921a87c
GCS_MAVLink: gate AP_DEVO_Telem behind !HAL_MINIMIZE_FEATURES
2019-09-04 17:47:33 +10:00
Michael du Breuil
a74f00d045
GCS_MAVLink: Remove single use method
2019-09-03 14:35:17 +10:00
Peter Barker
5d9b332bcb
GCS_MAVLink: log exectuted COMMAND_LONG and COMMAND_INT packets
2019-08-27 09:32:00 +10:00
Andrew Tridgell
cfc37f2089
GCS_MAVLink: log corrected timestamp for vision data
...
this allows for debugging of link lag issues
2019-08-26 12:27:31 +10:00
Peter Barker
052e721622
GCS_MAVLink: tweak timings debug messages
2019-08-24 15:33:50 +10:00
Peter Barker
4f9d1ada33
GCS_MAVLink: deny setting MIS_TOTAL parameter
...
Closes #11413
GCS_MAVLink: conform to parameter protocol requirements while ignoring sets
GCS_MAVLink: use internal-use-only param bit
2019-08-22 09:23:56 +10:00
Peter Barker
03c439f9ab
GCS_MAVLink: make update_sensor_status_flags private
2019-08-17 17:45:03 +10:00
Peter Barker
74670a77be
GCS_MAVLink: avoid allocating a GCS_MAVLINK per mavlink channel
2019-08-14 18:25:43 +10:00
Peter Barker
4b012ab62b
GCS_MAVLink: deny upload of non-MISSION items if not doing mavlink2
2019-08-06 13:58:44 +10:00
Peter Barker
cf0b7cf016
GCS_MAVLink: pass link object in place of channel to compass cal
...
Also eliminate intermediate function as just adding noise
2019-08-05 09:23:10 +10:00
Peter Barker
880e96448b
GCS_MAVLink: tighten type on mavlink_coordinate_frame_to_location_alt_frame
2019-08-01 17:45:30 +10:00
Peter Barker
5e55aedd20
GCS_MAVLink: add printf-format attribute to send_text methods
2019-07-26 10:54:41 +10:00
Peter Barker
93ca243987
GCS_MAVLink: rearrange mission item handling code
...
This splits the missionitemprotocol handling entirely into separate
header files and separate compilation units.
2019-07-18 10:48:57 +09:00
Peter Barker
210c2070a1
GCS_MAVLink: remove include of AP_Param.h in GCS_MAVLink.h
...
This will help break include loops.
2019-07-17 18:05:29 +10:00
Pierre Kancir
b1506ca652
GCS_MAVLink: pass mavlink_message_t by const reference
2019-07-16 20:51:42 +10:00
Peter Barker
459680e7c8
GCS_MAVLink: make Avoidance responsible for sending collision message
2019-07-16 09:52:54 +10:00
Peter Barker
c0993509f7
GCS_MAVLink: declare GCS_MAVLINK as a class as it hasn't been defined yet
2019-07-16 09:29:48 +10:00
Peter Barker
6cb8fcc466
GCS_MAVLink: move use of AP_AHRS_NAVEKF_AVAILABLE into cpp file
...
This is defined in AP_AHRS which we only get transitively in the header
2019-07-09 22:32:57 +10:00
Peter Barker
1ebbe45fe1
GCS_MAVLink: split sending of RC_CHANNELS and RC_CHANNELS_RAW
...
Before this patch is applied we may never send the second message
because there's not room for it in the buffer and we can't return
failure-to-send (always interpreted as "retry") as we're in a void function.
Further, if you are on a mavlink2 connection we will not send out the
RC_CHANNELS_RAW message, depriving the user of any RC_CHANNELS messages.
This patch does have the drawback of doing more work on a mavlink1
connection - it has to fetch the data twice. On the other hand, it also
allows the GCS to set the message rates independently for both
RC_CHANNELS and RC_CHANNELS_RAW so one or the other can be squelched.
That could be handy for reducing bandwidth if you know you're not using
more than 8 input channels.
2019-07-09 13:08:45 +10:00
Michael du Breuil
f955a4e4d5
GCS_MAVLink: Don't retain a FrSky instance if we aren't using it
...
Saves 96 bytes of RAM
2019-06-26 11:59:41 +10:00
Peter Barker
feddaabc42
GCS_MAVLink: handle out-of-time to send messages in parent class
2019-06-25 10:29:40 +10:00
Andrew Tridgell
f28df4dff1
GCS_MAVLink: support MAV_CMD_BATTERY_RESET command
2019-06-25 09:56:25 +10:00
Peter Barker
a55c40949b
GCS_MAVLink: remove pointless protocol parameter to setup_uart
2019-06-25 09:47:08 +10:00
Peter Barker
ca449cd979
GCS_MAVLink: stop pointlessly passing serial manager around
2019-06-25 09:47:08 +10:00
Peter Barker
45fab82345
GCS_MAVLink: eliminate redundant static pointer to serialmanager
2019-06-25 09:47:08 +10:00
Michael du Breuil
8c00102259
GCS_MAVLink: Reduce scoping on AP_BattMonitor include
2019-06-18 10:02:05 +10:00
Peter Barker
a025794bae
GCS_MAVLink: correct is_streaming check and update of is-streaming mask
2019-06-11 09:26:10 +10:00
Peter Barker
264a757095
GCS_MAVLink: add send_to_active_channels method
2019-06-06 12:41:48 +10:00
Peter Barker
75ae6b59b0
GCS_MAVLink: allow Copter to disallow mavlink disarm
2019-05-30 07:37:30 +09:00
Peter Barker
1b90643751
GCS_MAVLink: report more internal errors in SYS_STATUS
2019-05-23 07:29:29 +10:00
Peter Barker
d0105c8fa7
GCS_MAVLink: factor mission handling, use for Rally
...
GCS_MAVLink: allow all mission types to be cleared
GCS_MAVLink: remove unused parameters from handle-mission-count
2019-05-22 08:53:45 +10:00
Peter Barker
a0c80a0b3b
GCS_MAVLink: make send_text and send_textv const
2019-05-01 10:18:46 +10:00
Peter Barker
c143ec47da
GCS_MAVLink: Bitmask is now a template
2019-04-16 15:12:07 +10:00
Randy Mackay
bbd051b246
GCS_MAVLink: send OPTICAL_FLOW messages to optical flow driver
2019-04-08 11:26:59 +09:00
Michael du Breuil
8cafbe394f
GCS_MAVLink: Fix includes
2019-04-05 20:12:53 +11:00
Rajat Singhal
b7a40f2bfe
GCS_Mavlink: Add function for sending POSITION_TARGET_LOCAL_NED message
2019-03-29 09:11:14 +11:00
Peter Barker
30a66d9f13
GCS_MAVLink: implement a convenience manual_override method
2019-03-27 22:33:47 -07:00
Randy Mackay
b496af411e
GCS_MAVLink: fix typo
2019-03-28 13:54:19 +09:00
Peter Barker
778bff966c
GCS_MAVLink: stop passing dataflash into handle_radio_status
...
It can use the singleton instead
2019-03-27 10:38:39 +11:00
Peter Barker
0ef26a6950
GCS_MAVLink: add support for request_message
2019-03-26 16:20:50 +11:00
Peter Barker
2796beac8d
GCS_MAVLink: move various sensor status flag updates up
2019-03-26 11:03:21 +11:00
Peter Barker
b3203601f3
GCS_MAVLink: send internal errors as bitmask in sys_status
2019-03-21 21:34:33 +11:00
Peter Barker
95745f0d31
GCS_MAVLink: move command-long DO_SET_HOME up
2019-03-19 19:56:13 +11:00
Peter Barker
bc2080cea2
GCS_MAVLink: move devo telemetry handling to GCS
2019-03-19 14:39:14 +11:00
Peter Barker
3100c8edad
GCS_MAVLink: GCS can report simple/supersimple input modes
2019-03-19 14:39:14 +11:00
Peter Barker
cf264a7d5e
GCS_MAVLink: move vehicle_initialised to be on GCS not GCS_MAVLink
2019-03-19 14:39:14 +11:00
Peter Barker
b12d20d86c
GCS_MAVLink: add support for frame_string
2019-03-19 14:39:14 +11:00
Peter Barker
ab1c42696c
GCS_MAVLink: move FRsky telemetry up into common GCS telemetry class
2019-03-19 14:39:14 +11:00
Michael du Breuil
75caad52c0
GCS_MAVLink: Always check the return value on get_velocity_NED
2019-03-19 11:42:54 +11:00
Peter Barker
4eba6d4fe2
GCS_MAVLink: exempt requested parameters from buffer space reservation
...
Fixes a problem where we reserve space to send replies but then do not
bypass the reserved-space checks when sending them.
2019-03-19 10:37:09 +11:00
Peter Barker
716b0fdc88
GCS_MAVLink: use enum class for AltFrame enumeration
2019-03-19 10:31:18 +11:00
Peter Barker
bb1ae30594
GCS_MAVLink: move sending of RPM message up
2019-03-16 10:33:01 +09:00
Randy Mackay
066a443e5f
GCS_MAVLink: add send_set_position_target_global_int
...
this supports sending the position target to an offboard navigation controller
2019-03-15 14:51:35 +09:00
Peter Barker
34e09a55be
GCS_MAVLink: support send_extended_sys_state
2019-03-12 09:16:13 +09:00
Peter Barker
74702b8688
GCS_MAVLink: make sending of send_pid_tuning up
2019-03-05 10:41:56 +11:00
IamPete1
20d79207d8
GCS_MAVLink: make send_global_position_int virtual
2019-03-01 20:57:54 +11:00
Peter Barker
ace5192852
GCS_MAVLink: retry sending home/origin if it fails
...
Also grants us the ability to stream these messages
2019-02-26 14:01:41 +11:00
Peter Barker
9f27e91f33
GCS_MAVLink: add simple stats to dataflash
2019-02-26 11:23:57 +11:00
Peter Barker
8de4ee7348
GCS_MAVLink: move update_sensor_status_flags into GCS subclasses
2019-02-19 14:09:59 +11:00
Peter Barker
cb33f290a7
GCS_MAVLink: move sensor flags to be a GCS thing rather than a GCS_MAVLINK thing
...
These are a per-vehicle thing, not a per-mavlink-backend thing.
2019-02-19 14:09:59 +11:00
Peter Barker
bfb3f0d62e
GCS_MAVLink: make capabilities comes from subclass, not HAL
2019-02-19 13:14:52 +11:00
Peter Barker
de615ee11d
GCS_MAVLink: move try_send_message of nav_controller_output up
2019-02-19 10:08:00 +11:00
Peter Barker
4a0887b807
GCS_MAVLink: measure stream slowdown in ms
...
This costs us a couple of extra bytes of RAM and gains us not doing a
whole heap of multiplies
2019-02-16 13:45:47 +11:00
Peter Barker
63427629e1
GCS_MAVLink: use visual odometry singleton
2019-02-15 16:56:13 +11:00
Peter Barker
d8847a6192
GCS_MAVLink: move handling of command-int MAV_CMD_DO_SET_HOME up
2019-02-13 09:42:26 +11:00
Peter Barker
64b4e69e34
GCS_MAVLink: break out an altitude enumeration mapping function
2019-02-12 09:07:50 +09:00
Tom Pittenger
9f0e895c37
GCS_MAVLink: unify singleton naming to _singleton and get_singleton()
2019-02-10 19:09:58 -07:00
Peter Barker
0ef7c6af59
GCS_MAVLink: move handling of fence point manipulation up
2019-02-08 11:47:59 +09:00
Peter Barker
8d45a8ff53
GCS_MAVLink: move handling of MAV_CMD_DO_SET_FENCE_ENABLED up
2019-02-08 11:47:59 +09:00
Peter Barker
ae68b58678
GCS_MAVLink: move handling of RC overrides up
...
Based on commit 8db5e5308731b6916d5da58a650cef015b887180 by dposea
2019-02-05 13:59:21 +11:00
Peter Barker
120f0822ae
GCS_MAVLink: move sending of sys_status message up
2019-02-05 11:07:39 +11:00
Peter Barker
f1907679e7
GCS_MAVLink: move sending of fence_status message up
2019-01-31 13:44:29 +09:00
Peter Barker
8b74ab32a3
GCS_MAVLink: support get_message_interval
2019-01-30 13:56:55 +09:00
Pavlo Kolomiiets
094505a76a
GCS_MAVLink: add WHEEL_DISTANCE to ap_message enum
2019-01-28 19:35:18 +09:00
Peter Barker
8e19e805c6
GCS_Common: clarify enumeration item name MSG_NEXT_WAYPOINT
2019-01-22 09:01:57 +11:00
Peter Barker
da1ded7cb9
GCS_MAVLink: rename queued_waypoint_send to queued_mission_request_send
2019-01-22 09:01:57 +11:00
Peter Barker
b47733142f
GLOBAL: rename DataFlash_Class to AP_Logger
2019-01-18 18:08:20 +11:00
Peter Barker
33baae80b1
GCS_MAVLink: remove PX4-specific code that disables overrides on reboot
2019-01-18 17:32:02 +11:00
Francisco Ferreira
f68f83505c
GCS_MAVLink: add preflight CAN command
2019-01-18 00:57:33 +00:00
Peter Barker
8fd8ae660b
GCS_MAVLink: send multiple async replies per call to send_queued_param
2019-01-15 10:11:21 +11:00
Michael du Breuil
27d461348e
GCS_MAVLink: Use rally singleton
2019-01-08 10:39:50 +11:00
Andrew Tridgell
c99dd5f9e8
GCS_MAVLink: implement UART pass-thru
2018-12-29 15:58:22 +11:00
Peter Barker
aa7844e4a7
GCS_MAVLink: split SIMSTATE, AHRS2 and AHRS3 onto their own ap_message ids
2018-12-19 13:19:23 +11:00
Peter Barker
979e5261d5
GCS_MAVLink: remove unused method
2018-12-19 10:55:38 +09:00
Peter Barker
77be393ad4
GCS_MAVLink: split DISTANCE_SENSOR onto its own ap_message id
2018-12-19 07:24:37 +11:00
Peter Barker
039ade421e
GCS_MAVLink: split SYS_STATUS and POWER_STATUS onto separate ap_messages
2018-12-18 14:05:20 +11:00
Peter Barker
759a8e5553
GCS_MAVLink: move accept_packet to base class
2018-12-14 12:44:31 +11:00
Peter Barker
dfd0ecd2bd
GCS_MAVLink: use mission singleton
2018-12-13 10:52:52 +09:00
Peter Barker
cc5ad393e7
GCS_MAVLink: split MSG_SCALED_PRESSURE into three separate messages
2018-12-12 21:36:01 +11:00
Peter Barker
eb2ef9fd2d
GCS_MAVLink: use dataflash singleton rather than storing pointer
2018-12-11 08:43:47 +09:00
Peter Barker
160c29e01f
GCS_MAVLink: change number of buckets to 10
2018-12-10 12:52:41 +09:00
Peter Barker
e91ee3e54a
GCS_MAVLink: rename confusingly-named method
2018-12-10 12:52:41 +09:00
Peter Barker
54d9e74f17
GCS_MAVLink add description for special messages
2018-12-10 12:52:41 +09:00
Peter Barker
5a0e0e7a87
GCS_MAVLink: rename DEBUG_SEND_MESSAGE_TIMINGS to GCS_DEBUG_SEND_MESSAGE_TIMINGS
2018-12-10 12:52:41 +09:00
Peter Barker
c15de72095
GCS_MAVLink: split MSG_RAW_IMU1 into per-IMU ap_messages
...
Also allows for sending SCALED_IMU for the first IMU rather than RAW_IMU
2018-12-10 12:52:41 +09:00
Peter Barker
ef46acda71
GCS_MAVLink: support MAV_CMD_SET_MESSAGE_INTERVAL
2018-12-10 12:52:41 +09:00
Peter Barker
f0a95182be
GCS_MAVLink: add is_active and is_streaming methods
2018-12-10 12:52:41 +09:00
Peter Barker
75e63db366
GCS_MAVLink: rename MSG_EXTENDED_STATUS2 to MSG_MEMINFO
2018-12-04 18:01:38 +11:00
Peter Barker
d5322633ed
GCS_MAVLink: rename MSG_RAW_IMU2 and MSG_RAW_IMU3 to reflect what they send
2018-12-04 17:45:32 +11:00
Andrew Tridgell
259723eb26
GCS_MAVLink: use JitterCorrection class
2018-12-04 11:37:38 +11:00
Andrew Tridgell
1e354d53c9
GCS_MAVLink: added private channel mask
...
this allows a channel to be marked "private". A private channel gets
heartbeats, but doesn't get forwarded packets or broadcast messages
This is used by solo gimbal driver
2018-11-24 11:00:37 +11:00
Peter Barker
f4cf4c7fa2
GCS_MAVLink: remove unused variable
2018-11-23 14:25:20 +09:00
Peter Barker
38fdcb02a4
GCS_MAVLINK: move sending of optical flow status up to base class
2018-11-13 10:40:23 +11:00
Peter Barker
3749cfd764
GCS_MAVLink: allow vehicles to override VFR_HUD.alt
2018-11-06 11:26:38 +09:00
Peter Barker
890a62fc51
GCS_MAVLink: move handling of gimbal messages up
...
GCS_MAVLink: move handling of mav_cmd_do_mount_control up
GCS_MAVLink: move handling of deprecated mount messages up
GCS_MAVLink: move handling of command_do_set_roi up
GCS_MAVLink: move handling of command_do_set_roi up
GCS_MAVLink: handle MAV_CMD_DO_MOUNT_CONFIGURE
GCS_MAVLink: call renamed AP_Mount send_mount_status msg
GCS_MAVLink: add support for MAV_CMD_DO_SET_ROI_LOCATION
2018-10-30 17:19:14 +11:00
Peter Barker
26e7abe6c4
GCS_MAVLink: use camera singleton to get camera rather than callback
2018-08-31 15:48:56 +10:00
Peter Barker
d5f6911db7
GCS_MAVLink: use compass singleton instead of subclass callback
2018-08-31 15:48:56 +10:00
Andrew Tridgell
048a52ebc0
GCS_MAVLink: make mavlink send from multiple threads safe
...
this takes a lock to prevent interleaving of mavlink msgs from
multiple threads
2018-08-16 12:40:10 +10:00
Peter Barker
3710c50c4e
GCS_MAVLink: handle MAV_CMD_ACCELCAL_VEHICLE_POS in GCS base class
2018-07-06 09:43:09 +10:00
Peter Barker
4775a67ea0
GCS_Common: handle command_long in GCS base class
2018-07-06 09:43:09 +10:00
Peter Barker
4ad065de99
GCS_MAVLink: handle command_int in base class
2018-07-06 09:43:09 +10:00
Peter Barker
f7daf1c676
GCS_MAVLink: rearrange code for clarity
2018-07-03 12:12:25 +10:00
Peter Barker
11df6debd0
GCS_MAVLink: move mavlink reboot code up to base class
2018-07-03 12:12:25 +10:00
Andrew Tridgell
94d8010a16
GCS_MAVLink: expose HUD throttle accessor
2018-07-03 07:29:43 +10:00
Peter Barker
4a8614fbbd
GCS_MAVLink: handle MAV_CMD_FLASH_BOOTLOADER
2018-06-28 11:35:13 +10:00
Peter Barker
a44c1378f7
GCS_MAVLink: add send_textv functions
2018-06-23 15:33:19 +10:00
Peter Barker
27cd972331
GCS_MAVLink: add magic number definitions
2018-06-20 11:43:38 +10:00
Andrew Tridgell
4e4e5a2feb
GCS_MAVLink: send ESC telemetry messages
2018-06-19 09:36:03 +10:00
Peter Barker
c333a905df
GCS_MAVLink: use AP_FWVersion singleton
2018-06-18 19:10:37 +01:00
Peter Barker
721feaf40f
GCS_MAVLink: use AP_RTC
...
GCS_MAVLINK: Add SYSTEM_TIME handle (Patrick José Pereira)
2018-06-15 08:01:22 +10:00
Peter Barker
b0aeec4b6a
GCS_MAVLink: move handling of MAV_CMD_DO_GRIPPER up
2018-06-11 19:07:39 +01:00
Michael du Breuil
b331ddd49b
GCS_MAVLink: Remove some common wrappers, fix excessive FALLTHROUGH
2018-06-05 03:25:42 +01:00
Peter Barker
e50a817150
GCS_MAVLink: make VFR_HUD always return height above MSL
2018-06-05 09:38:20 +10:00
Peter Barker
d8871078ff
GCS_MAVLink: create persist_streamrates() callback to indicate persistence
...
Removes the catching of the message in each vehicle separately.
2018-05-29 13:08:29 +10:00
Peter Barker
d1174bcf70
GCS_MAVLINK: move try_send_message handling of vfr_hud up
2018-05-29 13:00:40 +10:00
Peter Barker
f668d0dc57
GCS_MAVLink: enhance TIMESYNC handling
...
GCS_MAVLink: use de-jittered timestamp for our timesync responses
GCS_MAVLink: periodically send timesync request packets
Currently no use is made of the result of these requests, however,
having the result present in telemetry logs will be useful data.
2018-05-25 11:36:17 +10:00
Peter Barker
e9d2be143a
GCS_MAVLink: moving sending of sim state up
2018-05-23 18:36:50 +10:00
Peter Barker
fe2d8f853b
GCS_MAVLink: add type-correctness for stream entries
2018-05-22 11:21:25 +10:00
Peter Barker
c5520cd995
GCS_MAVLink: eliminate MSG_LIMITS_STATUS
...
Only Sub used this, and it used it to send fence status, which we have a
separate ID for
2018-05-22 09:05:14 +09:00
Peter Barker
92927cd848
GCS_MAVLink: move try_send_message of servo-output-raw up
2018-05-21 19:08:08 +01:00
Peter Barker
0ca888d52a
GCS_MAVLink: move sending of POSITION_TARGET_GLOBAL_INT up
2018-05-18 20:26:37 +10:00
Peter Barker
4440f7ec4a
GCS_MAVLink: move sending of GLOBAL_POSITION_INT up to GCS_MAVLINK
2018-05-17 15:48:06 +01:00
Peter Barker
217fd73100
GCS_MAVLink: remove arguments to send_home and send_ekf_origin
2018-05-17 20:42:36 +10:00
Peter Barker
514bc5c21d
GCS_MAVLink: move send_attitude up to GCS_MAVLINK
2018-05-17 18:28:43 +10:00
Peter Barker
695c52be05
GCS_MAVLink: allow sub to override sending of scaled_pressure3
2018-05-17 15:37:14 +10:00
Peter Barker
8cb2b5809f
GCS_MAVLink: move try_send_message sending of sensor offsets up
2018-05-17 15:37:14 +10:00
Peter Barker
b51ec1d346
GCS_MAVLink: move try_send_message of RAW_IMU up to GCS_MAVLINK
2018-05-17 15:37:14 +10:00
Peter Barker
fc1775df75
GCS_MAVLink: handle setting of ekf origin in GCS_MAVLink
2018-05-17 10:13:42 +10:00
Michael du Breuil
1b05a18b84
GCS_MAVLink: Wrap sending named float values
2018-05-17 00:59:45 +01:00
Michael du Breuil
805e9519d1
GCS_MAVLink: Send rangefinder data
2018-05-16 23:21:41 +01:00
Michael du Breuil
03fc653e62
GCS_MAVLink: Don't rely on instance data from rangefinders
2018-05-16 23:21:41 +01:00
Andrew Tridgell
f4f62ececa
GCS_MAVLink: take account of transport lag in vision timestamps
2018-05-16 18:49:22 +10:00
Andrew Tridgell
ab9ef01889
GCS_MAVLink: added function for correcting offboard timestamps
2018-05-15 10:42:52 +09:00
Peter Barker
347ab96bf0
GCS_MAVLink: move sending of battery data up
...
Also, use singleton to get battery object
2018-05-09 11:40:31 -07:00
Peter Barker
417e9e9aaf
GCS_MAVLink: move data stream send up
2018-05-09 16:15:38 +10:00
Peter Barker
b76fa57108
GCS_MAVLink: move try_send_message handling of RC_CHANNELS_RAW up
2018-05-08 12:33:32 +01:00
Peter Barker
eecdcacf3e
GCS_MAVLink: move sending of heartbeats up to GCS_MAVLINK
2018-05-07 11:30:13 -06:00
Peter Barker
e4b4a746e6
GCS_MAVLink: move try_send_message handling of VIBRATION up
...
Also, use singleton to get ins
2018-05-07 11:23:28 -06:00
Peter Barker
bf124e9333
GCS_MAVLink: make send_parameter_value_all a GCS method rather than static
2018-05-01 09:39:01 +10:00
Randy Mackay
e5c0b1814a
GCS_MAVLink: remove underscore from method names
2018-04-19 13:38:22 +09:00
Vince Kurtz
2f81747112
GCS_MAVLink: fix VISP logging
...
log VISP messages for the ATT_POS_MOCAP mavlink message as well
2018-04-19 13:34:49 +09:00
Peter Barker
682679c68d
GCS_MAVLink: use AP_ServoRelayEvents singleton
2018-04-18 20:31:55 +09:00
Andrew Tridgell
fd3037bbb7
GCS_MAVLink: add support for alternative protocol
...
this allows an alternative to MAVLink to be installed on a GCS
port. This is used for BLHeli passthru support
2018-04-07 09:10:29 +10:00
Peter Barker
4fd2ec1cef
GCS_MAVLink: factor vehicle's mavlink send_heartbeat
2018-04-03 13:05:19 +01:00
Peter Barker
c6d7f5151a
GCS_MAVLink: tidy handling of barometer calibrations
2018-04-02 23:25:05 +01:00
Peter Barker
d878690d00
GCS_MAVLink: move common calibration functions up
2018-04-02 23:25:05 +01:00
Peter Barker
f6b7ca75e9
GCS_MAVLink: allow Plane to override method so it can set calib. flag
2018-04-02 23:25:05 +01:00
Peter Barker
09d4e36970
GCS_MAVLink: handle preflight calibrations
2018-04-02 23:25:05 +01:00
Peter Barker
ac1a00739c
GCS_MAVLink: remove msg_snoop functionality
...
inherit from GCS_MAVLink if you want to see mavlink traffic
2018-03-28 09:28:23 +09:00
Peter Barker
484d97597b
GCS_MAVLink: pass mavlink acks into accelcal library if it exists
2018-03-28 09:28:23 +09:00
Peter Barker
a5a36c04d1
GCS_MAVLink: feed vision position data into AHRS
2018-03-27 20:28:49 +09:00
Peter Barker
ed5140307a
GCS_MAVLink: move handling of visual odometry messages up
2018-03-23 09:28:07 +09:00
Peter Barker
bed3f0c344
GCS_MAVLink: move handling of get_home_position up
2018-03-19 10:32:37 +09:00
Peter Barker
e9ecc11b00
GCS_MAVLink: use baro singleton
2018-03-08 21:20:05 -08:00
Peter Barker
9d381c26a7
GCS_MAVLink: use AHRS singleton
2018-03-07 12:34:39 +00:00
Andrew Tridgell
8f1e8e787a
GCS_MAVLink: added DATA96 hook for AP_Radio
2018-02-08 17:36:33 +11:00
Peter Barker
e39e8359b6
GCS_MAVLink: tighten result of handle_preflight_reboot
2017-12-01 17:01:10 +00:00
Peter Barker
269294754f
GCS_MAVLink: use gps singleton
2017-11-15 13:43:03 +00:00
Lucas De Marchi
ed2b8d3476
GCS_MAVLink: refactor send_autopilot_verison() to use AP_FWVersion
...
Make the method use the getter directly to get a reference of
AP_FWVersion and work out everything that needs to be sent. This allows
us to remove ifdefs and replace with runtime if/else.
Note that there's also a bug fix: we were not setting flight_custom_version
to zero in case GIT_VERSION wasn't defined.
2017-09-23 21:37:45 -07:00
Peter Barker
d0c2898ebc
GCS_MAVLink: move handling of SET_GPS_GLOBAL_ORIGIN up
2017-09-19 15:44:23 +09:00
Randy Mackay
07c195a865
GCS_MAVLink: add send_ekf_origin
2017-09-19 10:30:15 +09:00
Peter Barker
6bd7089718
GCS_MAVLink: implement handling of MAV_CMD_DO_SET_MODE
2017-09-19 01:24:11 +01:00
Peter Barker
8507763a1c
GCS_MAVLink: create _handle_set_mode for common msg and cmd-long code
2017-09-19 01:24:11 +01:00
Lucas De Marchi
58dec08b29
GCS_MAVLink: fix non static perf counter
...
Commit b9877e0d38
(GCS_MAVLink: make per channel perf counter non-static) made the
perf counters to be available per instance but missed the fact that
the perf infra doesn't copy the string.
Fix this by maintaining a the string inside the object.
2017-09-12 17:24:31 -07:00
Peter Barker
b4e536b424
GCS_MAVLink: move gcs_out_of_time into GCS object
2017-09-12 18:28:07 +01:00
Lucas De Marchi
b9877e0d38
GCS_MAVLink: make per channel perf counter non-static
...
Otherwise the perf counter from one channel may affect the other if
during an update of one channel the update function of the other gets
called.
2017-09-11 10:01:57 -07:00
Peter Barker
ac806b650f
GCS_MAVLink: move handling of do_send_banner up
2017-08-30 15:54:47 +01:00
Peter Barker
1544a92f8b
GCS_MAVLink: factor out a send_banner
2017-08-30 15:54:47 +01:00
Peter Barker
50242178b3
GCS_MAVLink: handle param_set in GCS_MAVLINK base class
2017-08-30 15:54:47 +01:00
Peter Barker
95ff94bfad
GCS_MAVLink: factor out a handle_common_param_message
2017-08-30 15:54:47 +01:00
Peter Barker
add1743c12
GCS_MAVLink: move send_autopilot_request calls up to GCS base class
2017-08-30 15:54:46 +01:00
Jacob Walser
e8f5967682
GCS_MAVLink: Add MSG_NAMED_FLOAT ap_message id
2017-08-23 13:40:52 +01:00
Peter Barker
154b212545
GCS_MAVLink: move serial_control case to base class
2017-08-17 12:42:31 +01:00
Peter Barker
2a07a077d9
GCS_MAVLink: use GCS_MAVLINK subclasses to handle set_mode
2017-08-16 11:05:37 +10:00
Peter Barker
c79cbd71af
GCS_MAVLink: use rangefinder backend accessors
2017-08-15 18:31:58 +01:00
Michael du Breuil
067335f68d
GCS_MAVLink: Handle termination requests from the GCS
2017-08-15 15:14:56 +01:00
Peter Barker
bff31e8b42
GCS_MAVLink: remove CLI
2017-08-14 10:23:50 +09:00
Peter Barker
7aaabea4ea
GCS_MAVLink: send gps messages as separate queued messages
2017-08-09 16:18:22 +01:00
Peter Barker
4e3cc6fd27
GCS_MAVLink: move sending of system_time up
2017-08-09 16:18:22 +01:00
Peter Barker
d1a9128118
GCS_MAVLink: move sending of camera_feedback up
2017-08-09 16:18:22 +01:00
Peter Barker
a841fddb3e
GCS_MAVLink: rename MSG_RETRY_DEFERRED to MSG_LAST and clarify comments
2017-08-05 23:13:48 +01:00
Peter Barker
0c5f66dc59
GCS_MAVLink: refactor code into new retry_deferred method
2017-08-05 23:11:09 +01:00
Peter Barker
679bb7f7a5
GCS_MAVLink: move try_send_message send_hwstatus up
2017-08-03 14:33:37 +01:00
Peter Barker
3b472ccc17
GCS_MAVLink: move try_send_message mission handling up
2017-08-03 14:24:47 +01:00
Peter Barker
b8cb758fac
GCS_MAVLink: move try_send_message compass message handling up
2017-08-03 14:24:46 +01:00
Peter Barker
b4688bd3d4
GCS_MAVLink: move common mavlink camera handling up
2017-07-28 14:32:58 +01:00
Peter Barker
60ffe00164
GCS_MAVLink: move gps inject handling up
...
Also, make AP_GPS responsible for decoding inject packets
2017-07-27 12:03:25 +01:00
Peter Barker
85a0da6178
GCS_MAVLink: handle common GPS messages in base GCS_MAVLINK class
2017-07-25 14:00:45 +01:00
khancyr
8abcb7a0e3
GCS_MAVLink: simplify send_proximity
2017-07-24 13:44:43 +01:00
khancyr
ec2ea1c903
GCS_MAVLink: move send_proximity to GCS common code (NFC)
...
Also clean two comments
2017-07-24 13:44:43 +01:00
Peter Barker
eb1cf0e73a
GCS_MAVLink: remove MSG_STATUSTEXT entirely
2017-07-18 16:12:59 +01:00
Peter Barker
06647cde2c
GCS_MAVLink: move handling of PREFLIGHT_SET_SENSOR_OFFSETS up
2017-07-17 14:17:19 +01:00
Peter Barker
bd28bdd907
GCS_MAVLink: move handling of MAG_CAL command longs up
2017-07-17 14:17:19 +01:00
Peter Barker
a7e57aa3fc
GCS_MAVLink: move MAV_CMD_START_RX_PAIR handling to base class
2017-07-17 14:17:19 +01:00
Peter Barker
318861e824
GCS_MAVLink: move mavlink support for servo/relay up
2017-07-16 23:56:00 +01:00
Peter Barker
cfc8d7feba
GCS_MAVLink: add common handling of mavlink command messages
2017-07-16 23:56:00 +01:00
Peter Barker
ebe3dcef6f
GCS_MAVLink: move rally-point handling up
2017-07-14 01:28:05 +01:00
Peter Barker
3338de827e
GCS_MAVLink: remove unneeded telemetry_delayed parameter
...
Also make it protected
2017-07-12 17:02:54 +01:00
Peter Barker
129d7220e6
GCS_MAVLink: move handling of incoming statutext messages up
2017-07-12 16:52:24 +01:00
Peter Barker
5c0aa27b2f
GCS_MAVLink: remove global static send_statustext_chan
2017-07-11 23:53:53 +01:00
Peter Barker
a599bc9031
GCS_MAVLink: eliminate GCS_MAVLINK::send_statustext_all
2017-07-11 23:53:53 +01:00
Peter Barker
731aaed8af
GCS_MAVLink: eliminate global static GCS_MAVLINK::send_home_all
2017-07-11 23:48:39 +01:00
Peter Barker
726007efde
GCS_MAVLink: move common mission handling up to GCS_MAVLINK
2017-07-11 23:45:17 +01:00
Peter Barker
02532af64b
GCS_MAVLink: a send_text method on the GCS singleton
2017-07-09 17:17:29 -04:00
Peter Barker
db27346fd7
GCS_MAVLink: move GCS functions up from GCS_Plane
2017-07-07 16:18:37 +01:00
Peter Barker
4c1aff03a3
GCS_MAVLink: move send-logs-via-mavlink code into DataFlash
2017-06-27 03:10:43 +01:00
Pierre Kancir
d5cc1e64ed
GCS_Common: rename send_rangefinder to send_rangefinder_downward
2017-06-08 01:32:04 +01:00
Pierre Kancir
e9685ba13e
GCS_MAVLink: add rangefinder msg
2017-06-08 01:22:07 +01:00
Pierre Kancir
0848d96354
GCS_MAVLink: add send_distance_sensor_downward function
2017-06-08 01:22:07 +01:00
Pierre Kancir
f0369bc507
GCS_MAVLink: add distance sensor msg
2017-06-08 01:22:07 +01:00
Michael du Breuil
c62e79b5c0
GCS_MAVLink: Update the accelcal signature to accept uint32_t
2017-06-01 20:20:05 +01:00
Michael du Breuil
16bd7a091e
GCS_MAVLink: Add landing reporting
2017-05-24 15:22:27 -07:00
Andrew Tridgell
f465c37c65
GCS_MAVLink: added async parameter sending
2017-05-01 14:37:13 +10:00