Commit Graph

195 Commits

Author SHA1 Message Date
Andrew Tridgell 7fe1c58575 AP_Notify: added handling of PLAY_TUNE message 2016-07-22 15:00:17 +10:00
Andrew Tridgell c471b635b3 AP_Notify: added NTF_LED_OVERRIDE parameter
when this is set the board RGB LED will be controlled by MAVLink
instead of internally. This is useful for cases where the LED patterns
and colours needed are specified by an external authority (such as the
OBC organisers)
2016-07-19 13:37:13 +10:00
Luiz Ywata 1f0f36d603 AP_Notify: NavioLED_I2C: use I2CDevice interface 2016-07-14 17:32:33 -03:00
Lucas De Marchi a34a5c1aa3 AP_Notify: Display_SSD1306_I2C: Fix after conversion to I2CDevice
- Initialize device on hw_init() method, allowing it not to be
      present
    - Add missing lock
    - Add packed attribute to structs
    - Move defines to source file
2016-07-14 17:32:33 -03:00
Luiz Ywata f26692de92 AP_Notify: Display_SSD1306_I2C: use I2CDevice interface 2016-07-14 17:32:33 -03:00
Lucas De Marchi 213c38afaf AP_Notify: ToshibaLED_I2C: add part number comment
It's easier to find the datasheet for this driver with the part number
rather than a generic "toshiba led".
2016-07-14 17:32:33 -03:00
Lucas De Marchi 5618008935 AP_Notify: ToshibaLED_I2C: Fix driver after I2CDevice conversion
- Add missing semaphore take on bus
    - Initialize device on init function rather than constructor: the
      constructor may run before I2CDeviceManager is initialized since our
      AP_Notify objects are static so it can't be used.
2016-07-14 17:32:33 -03:00
Luiz Ywata 0b69e43464 AP_Notify: ToshibaLED_I2C: use I2CDevice interface 2016-07-14 17:32:32 -03:00
Andrew Tridgell 26ef71e130 AP_Notify: added tuning error tones 2016-05-28 17:33:30 +10:00
Vinicius Juvinski ed2718a183 AP_Notify: Buzzer: change pin 11(P8_31) to pin 12(P8_32)
Avoid boot conflict during power on.
2016-05-19 17:22:27 -03:00
Ricardo de Almeida Gonzaga e31a37e7a8 AP_Notify: Fix typos 2016-05-13 19:20:05 -03:00
Vinicius Juvinski 3bae8373e6 AP_Notify: play vehicle lost tone 2016-05-11 22:49:52 -03:00
Vinicius Juvinski c1dd3cb921 AP_Notify: add support for for Buzzer on BBBMini
Use GPIO P8_31 for buzzer in BBBMini
2016-05-11 22:49:52 -03:00
Andrew Tridgell 3e75fc4f3d AP_Notify: improved tones for AP_Tuning 2016-05-09 17:24:38 +10:00
Andrew Tridgell 9cd4f8a856 AP_Notify: added tones for tuning stages 2016-05-07 18:34:13 +10:00
Jonathan Challinger a7f959e6f9 AP_Notify: add ToneAlarm_PX4_Solo 2016-04-21 10:05:36 +10:00
Jonathan Challinger d2ca2d2e0e AP_Notify: change OREOLED config to ifdef 2016-04-21 10:04:37 +10:00
Jonathan Challinger dba55182af AP_Notify: add flags.powering_off 2016-04-21 10:04:37 +10:00
pepevalbe abb667fac3 AP_Notify: enable/disable buzzer in Linux based boards 2016-04-14 08:59:11 +09:00
pepevalbe c00cbcf076 AP_Notify: enable/disable buzzer in PX4 based boards 2016-04-14 08:59:08 +09:00
pepevalbe c9862b1502 AP_Notify: New parameter to enable/disable buzzer 2016-04-14 08:59:06 +09:00
Lucas De Marchi 4467929692 AP_Notify: add class to turn LED off
On early versions of minlure an RGB LED was wrongly placed next to the
barometer, causing trouble on it.

Additionally depending on the LED intensity it may be a pain to leave it
turned on for boards supposed to be used for bench testing. This allows
to disable the LED by software so we don't have to remove it.
2016-03-09 20:46:06 -03:00
Paul Riseborough 1e8af3dea4 AP_Notify: Add tone sequence to alert user when throw detector is armed
Use a medium tempo ascending three tone sequence with sufficient gap to allow the throwing action to be completed without distraction.
2016-03-03 12:18:16 +09:00
Staroselskii Georgii 5b3627f83e AP_Notify: made DiscreteRGBLed more generic
- made pins and polarity configurable
- got rid of all Navio specific code
2016-02-27 03:06:50 -03:00
Staroselskii Georgii ef4e3aa333 AP_Notify: renamed Navio2Led to DiscreteRGBLed 2016-02-27 03:06:50 -03:00
Staroselskii Georgii 0bd7839b9f AP_Notify: made Navio2LED a little easier to configure
- got rid of a lot of not needed defines
- allocated channels on init instead of accessing them every time
  through the HAL reference
- simpliefied hw_set_rgb()
2016-02-27 03:06:50 -03:00
Staroselskii Georgii 2ea69571ef AP_Notify: disabled boardled for Navio 2016-02-27 03:06:50 -03:00
Staroselskii Georgii 3223802431 AP_Notify: enabled leds for Navio2 2016-02-27 03:06:50 -03:00
Alexey Bulatov fc6351b929 AP_Notify: added Navio2LED driver 2016-02-27 03:06:50 -03:00
Lucas De Marchi 7d24b4d1ca AP_Notify: add missing include to use board config
<command-line>:0:18: warning: "HAL_BOARD_LINUX" is not defined [-Wundef]
../../libraries/AP_Notify/Buzzer.h:20:5: note: in expansion of macro ‘CONFIG_HAL_BOARD’
 #if CONFIG_HAL_BOARD == HAL_BOARD_VRBRAIN
     ^
In file included from ../../libraries/AP_Notify/Buzzer.cpp:18:0:
../../libraries/AP_Notify/Buzzer.h:20:25: warning: "HAL_BOARD_VRBRAIN" is not defined [-Wundef]
 #if CONFIG_HAL_BOARD == HAL_BOARD_VRBRAIN
                         ^
2016-02-19 12:35:20 -02:00
Lucas De Marchi 09d926fa11 AP_Notify: replace header guard with pragma once 2016-02-18 14:52:35 -02:00
Lucas De Marchi 5ba20b1763 AP_Notify: sanitize includes
Due to the way the headers are organized changing a single change in
an AP_Notify driver would trigger a rebuild for most of the files in
the project. Time could be saved by using ccache (since most of the
things didn't change) but we can do better, i.e. re-organize the headers
so we don't have to re-build everything.
2016-02-01 14:18:51 -02:00
Gustavo Jose de Sousa c2e3f05dbf waf: ardupilotwaf: prefix build context methods with ap_
It helps to distinguish between things from waf and things from ardupilotwaf.
2016-01-22 20:10:29 -02:00
Gustavo Jose de Sousa 3d22490397 waf: examples: use methods from bld instead of ardupilotwaf 2016-01-22 20:10:29 -02:00
Gustavo Jose de Sousa d281067bcc waf: make example binaries be placed in 'examples' dir
This commit makes examples' wscripts use ardupilotwaf.example() instead of
ardupilot.program().
2016-01-15 16:46:41 -02:00
mirkix 1744bc0850 AP_Notify: Use display with bbbmini 2016-01-07 14:32:56 -02:00
mirkix 2457558624 AP_Notify: Add display support 2016-01-07 14:32:56 -02:00
mirkix dee20a31f1 AP_Notify: Add gps_num_sats 2016-01-07 14:32:56 -02:00
Víctor Mayoral Vilches d73fc4c0b2 AP_Notify: Add PXFmini support 2016-01-05 15:35:56 -02:00
Randy Mackay 4e9f82a0e7 Notify: fix parameter description 2015-12-31 11:33:02 +09:00
pepevalbe 0d5e59eaa3 AP_Notify: configurable RGB LED brightness 2015-12-31 11:32:59 +09:00
Jonathan Challinger 99636b3e8b AP_Notify: fix example build 2015-12-29 10:46:35 -08:00
Lucas De Marchi a096703b06 Global: don't link with AP_Progmem
AP_Progmem is not used anymore.
2015-12-27 15:58:12 -02:00
Aaron Wang Shi fc2e810fb2 AP_Notify: add 1 RGB and board LEDs to BH hat 2015-12-21 15:54:30 +11:00
José Roberto de Souza 63e1d0753e AP_Notify: Add a new RGBLed implementation that works over RCOutput
To be used in boards that uses the same PWM chip to generate signal to
control motors and the status led.
2015-12-16 08:18:17 +11:00
Lucas De Marchi a4213166ae AP_Notify: remove unused AP_ADC_AnalogSource 2015-12-03 13:32:44 +11:00
Caio Marcelo de Oliveira Filho 6e7b73610d waf: add waf support 2015-12-03 07:54:30 +11:00
Julien BERAUD 0fa362ff5c AP_Notify: Fix GPIO declaration for Linux boards
Currently, the default behaviour on linux boards tries to
write LED gpios with fixed values among them. There is no way
to declare that there are no LED GPIOs.
This commit moves the declaration of the LED Gpios in AP_HAL_Boards.h
and makes AP_Notify do nothing if no LED gpio was declared
2015-12-01 07:07:26 +11:00
Caio Marcelo de Oliveira Filho daee8e8e76 AP_Notify: use millis/micros/panic functions 2015-11-20 12:33:13 +09:00
Andrew Tridgell 8f4ce7f20b build: removed all nocore.inoflag files
these were APM2 specific
2015-11-16 08:05:17 +11:00