Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
58,795 Commits 71 Branches 508 Tags 630 MiB
Commit Graph

41 Commits

Author SHA1 Message Date
Henry Wurzburg d0ac8f3016 AP_HAL_ChibiOS: normalize SerialManagers ports defaults to allow inclusion in hwdefs 2023-05-11 18:45:53 +10:00
Henry Wurzburg fc42f8f9be AP_HAL_ChibiOS: move NTF_LED_TYPES from defaults to hwdef 2023-05-04 07:45:12 +10:00
Henry Wurzburg efd0937568 AP_HAL_ChibiOS: rename/remove HAL_BUZZER_ON to DEFAULT_BUZZ_ON_LVL 2023-04-23 11:19:50 +10:00
Henry Wurzburg be94015dba AP_HAL_ChibiOS: remove unused HAL_BUZZER_OFF defines 2023-04-22 13:51:09 +10:00
Henry Wurzburg eee856b427 hwdef: limit to onboard BARO for low flash F4 boards 2022-10-25 10:33:24 +11:00
Peter Barker 7da0b3aaf2 AP_HAL_ChibiOS: allow airspeed backends to be compiled out 2022-05-10 09:02:51 +10:00
Andrew Tridgell 37d8feb928 hwdef: disable GPS drivers on low flash boards 
only leave uBlox enabled on boards that are running out of flash
 2022-04-06 14:14:07 +10:00
Peter Barker 0eacc0348e AP_HAL_ChibiOS: remove HAL_COMPASS_DEFAULT define 
this doesn't actually allow you to specify a default, despite the name
and a couple of hwdefs trying to use it that way.

This would have stopped being useful when we did the
compass-prority-table stuff - or before.
 2022-02-01 12:10:38 +11:00
Peter Barker 9a2d9898ba AP_HAL_ChibiOS: eliminate HAL_LOGGING_DATAFLASH 
This define didn't add anything over HAL_LOGGING_DATAFLASH_ENABLED - and
predates it.
 2021-11-23 11:24:46 +11:00
bugobliterator 8651d99de6 HAL_ChibiOS: move to using parameter STORAGE_FLASH_PAGE instead of define 2021-10-30 19:24:57 +11:00
Andrew Tridgell 47da7f5c9b HAL_ChibiOS: change RCIN FLOAT to PULLDOWN 
this lowers the chance of noise on a RCIN pin causing incorrect
protocol detection
 2021-10-12 11:52:36 +11:00
Peter Barker 70aef84997 AP_HAL_ChibiOS: remove definitions of BOARD_PWM_COUNT_DEFAULT 
No longer used
 2021-08-20 10:51:19 +10:00
Andy Piper 0279c86f7f AP_HAL_ChibiOS: use hardware serial inversion pins on F4 boards that support it 
change mamba F405 to active high as per betaflight
 2021-08-19 17:05:42 +10:00
Andy Piper baf92a17f9 AP_HAL_ChibiOS: disable AP_Mount on "mini" boards 2020-08-04 09:18:14 +10:00
Andrew Tridgell 259cb0aafd HAL_ChibiOS: removed EKF2 define, not needed any more 2020-05-10 15:09:54 +10:00
Andrew Tridgell 32cdfddf12 HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER 
much easier to understand
 2020-04-28 10:32:23 +10:00
Andrew Tridgell a9df9fe0c0 HAL_ChibiOS: removed clock tree settings in most hwdef.dat 
these are better set automatically in the headers. This simplifies the
task of doing a new port
 2020-04-28 10:32:23 +10:00
Andrew Tridgell e8b2b52bae HAL_ChibiOS: removed STM32_VDD from hwdef.dat 
use default
 2020-04-28 10:32:23 +10:00
Henry Wurzburg e5319397b4 AP_HAL_ChibiOS: eliminate EKF2 from F4 builds not using HAL_MINIMIZE_FEATURES 2020-04-14 09:19:28 +10:00
Andy Piper 6f979d5f7f AP_HAL_ChibiOS: define OSD_ENABLED as 1 rather than ENABLED 2019-12-30 13:02:04 +11:00
Andrew Tridgell cbe0af2463 HAL_ChibiOS: setup for LEDs on KakuteF4 
this makes Kopis1 display LEDs properly
 2019-09-10 13:03:28 +10:00
Andrew Tridgell 54649a0e4f HAL_ChibiOS: fixed KakuteF4 define for SERIAL2 2019-09-06 08:51:45 +10:00
Andrew Tridgell 068e6ea8d2 HAL_ChibiOS: convert KakuteF4 and KakuteF7 to new sensor config 2019-05-30 15:39:57 +10:00
Andrew Tridgell 17d804f051 HAL_ChibiOS: fixed GPIO numbering for KakuteF4 2019-02-22 11:34:43 +11:00
Stephen Dade de37e2e179 HAL_ChibiOS: Corrected servo output order for KakuteF4 2019-02-22 11:34:43 +11:00
Andrew Tridgell f98bfb1a35 HAL_ChibiOS: enable flash logging on Omnibus and speedybeef4 2019-01-23 09:00:42 +11:00
Andrew Tridgell 2882e5d5e1 HAL_ChibiOS: enable dataflash logging on KakuteF4 2019-01-21 21:57:21 +11:00
Andrew Tridgell 39003905b9 HAL_ChibiOS: re-arrange KakuteF4 UARTs 
this allows for FrSky S.PORT on Telem2, and enables it by default
 2018-11-18 21:37:56 +11:00
vierfuffzig d204939cb2 AP_HAL_ChibiOS: set default type for boards with onboard OSD 2018-11-09 08:12:51 +11:00
Andrew Tridgell 95aaa01014 HAL_ChibiOS: override COMPASS_AUTO_ROT on several boards 2018-07-28 18:05:12 +10:00
Andrew Tridgell 9ab55f6838 HAL_ChibiOS: probe for external compasses on several boards 
boards that have no internal compass will now probe for all external
compass types
 2018-07-14 17:51:50 +10:00
Andrew Tridgell 0310bd468c HAL_ChibiOS: changed uart order for KakuteF4 
thanks to feedback from Arther
 2018-07-12 11:50:10 +10:00
Andrew Tridgell fd02865a8b HAL_ChibiOS: use wildcard ROMFS name for fonts 2018-07-09 19:41:56 +10:00
Andrew Tridgell cf19e7a3ae HAL_ChibiOS: enabled OSD on KakuteF4 2018-06-27 14:55:00 +10:00
Andrew Tridgell 7cce23671a HAL_CbibiOS: removed unnecessary BOARD_SUBTYPE define 
just causes build warnings
 2018-06-27 11:37:45 +10:00
Andrew Tridgell 2f8a534243 HAL_ChibiOS: expand param storage on F4 boards with flash storage 
this allows for a lot more param space on these boards
 2018-06-24 08:26:28 +10:00
Andrew Tridgell f9faa0765d HAL_ChibiOS: fixed bootloader IDs 2018-06-22 08:00:31 +10:00
Andrew Tridgell c273b23940 HAL_ChibiOS: moved MCU config to python database 
this moves the key MCU config variables related to memory to the
python MCU database, allowing the hwdef.dat to be considerably simpler
 2018-06-06 07:15:41 +10:00
Andrew Tridgell 8571e59d85 HAL_ChibiOS: fixed SBUS inversion for KakuteF4 2018-05-20 15:50:44 +10:00
mirkix 34c96c80ff AP_HAL_ChibiOS: rename BUZZER_PIN into HAL_BUZZER_PIN 2018-05-10 17:48:25 +01:00
Andrew Tridgell bba8d506d6 HAL_ChibiOS: port for kakutef4 flight board 2018-04-24 08:03:46 +10:00