Commit Graph

2737 Commits

Author SHA1 Message Date
Andrew Tridgell 415db390af Copter: check param table on startup 2014-01-31 13:10:00 +11:00
Randy Mackay e13984f6c1 Copter: remove unused compat.pde entries 2014-01-30 14:33:55 +09:00
Randy Mackay a078d00e6a Copter: firmware to AC3.1.2-rc1 2014-01-30 14:00:20 +09:00
Randy Mackay 214a859e97 Copter: remove unused RADX100 definition
The real purpose of this small change is to kick off the autobuilder for
the AC3.1.1 release.
2014-01-26 13:41:14 +09:00
Randy Mackay 3ba5b70736 Copter: fix compiler warning from motorsync test 2014-01-26 11:08:34 +09:00
Randy Mackay a45b9cbe9a Copter: remove unused RELAY_TOGGLE definition 2014-01-26 10:10:02 +09:00
Stefan a6b6d46a30 Copter: Update ReleaseNotes.txt 2014-01-22 15:05:31 +09:00
Ju1ien 311bba1419 Copter: landing_complete stays true until thr is raised
The idea of the fix is we can't leave land while throttle is 0 and then
we ignore the baro and it's disturbances.
2014-01-22 14:38:35 +09:00
Randy Mackay 7fcd847f77 Copter: reword FRAME parameter's @Value 2014-01-22 11:35:35 +09:00
Randy Mackay 231e3ccaac Copter: add NewX @Value for FRAME parameter 2014-01-22 10:57:17 +09:00
Randy Mackay dee5fb212a Copter: remove dup definition of FRAME_ORIENTATION
Ideally the frame orientation parameter should be moved to the motors
class
2014-01-21 21:44:17 +09:00
Randy Mackay f7f8691ca3 Copter: remove frame setup through CLI 2014-01-21 21:42:59 +09:00
Randy Mackay 34f14a7c13 Copter: version to AC3.1.1-rc2
This update applies to pixhawk only
2014-01-21 21:23:11 +09:00
Randy Mackay 3c7e7db8a7 Copter: AC3.1.1-rc2 release notes 2014-01-21 21:22:42 +09:00
Andrew Tridgell e8b8cc1a5d Copter: converted to AP_ServoRelayEvents 2014-01-20 17:06:29 +11:00
Andrew Tridgell e3804e2846 Copter: fixes for AP_Relay API change 2014-01-20 17:06:29 +11:00
Andrew Tridgell 50a90a1043 Copter: enable AP_BoardConfig 2014-01-20 17:06:28 +11:00
Randy Mackay 111d0854a7 Copter: motorsync cli test 2014-01-18 17:00:43 +09:00
Randy Mackay 0f957bdc5a Copter: lean angle arming check 2014-01-17 17:31:28 +09:00
Randy Mackay a7f03619f2 Copter: add inav vs baro arming check
In-flight Barometer sanity checking will be a more complete solution but
until then this should catch some bad pre-flight barometer behaviour
2014-01-17 17:21:42 +09:00
Andrew Chapman b7eab7ea22 Copter: Added GCS feedback for save_trim()
Trim save gives no feedback, so I've added a gcs_send_text() call to
print "Trim saved" so the user knows to re-center trims again
2014-01-16 14:23:19 +09:00
Randy Mackay 8a29d63d89 Copter: faster baro calibration when arming
using update_calibration() instead of the full calibrate() cuts
1.5seconds of the arming time
2014-01-15 23:28:24 +09:00
Randy Mackay ae4f368f16 Copter: allow ch6 tuning of loiter speed 2014-01-15 15:22:52 +09:00
Randy Mackay 6d55895d30 Copter: simplify do-set-servo mission command
This potentially changes the servo number that must be supplied if using
an APM1 but it now shares the same logic as arduplane and also adds
protection that the servo is not attached to the motor.
removed debug message from previous commit.
2014-01-15 14:36:50 +09:00
Randy Mackay 67c2bc7d0b Copter: add support for MAV_CMD_DO_SET_SERVO 2014-01-15 14:03:04 +09:00
Randy Mackay a9f1a2ee5e Copter: disarm on land even if pilot throttle not zero
default behaviour remains as before, this is an compile time option only
2014-01-15 11:31:00 +09:00
Randy Mackay ac99d2d19a Copter: update AC3.1.1-rc1 release notes 2014-01-14 21:56:15 +09:00
Randy Mackay a3527ade61 Copter: move EARTH_FRAME definition to defines.h
defines.h is for defining enumerations and other unchanging values while
config.h is for changeable values like parameter defaults, enabling or
disabling sensors.
2014-01-14 21:53:13 +09:00
Randy Mackay 66859686a0 Copter: remove some unused definitions 2014-01-14 21:21:54 +09:00
Randy Mackay dd5521aa06 Copter: update version to AC3.1.1-rc1 2014-01-14 21:01:54 +09:00
Randy Mackay b1525a421b Copter: AC3.1.1-rc1 release notes 2014-01-14 21:01:40 +09:00
Andrew Tridgell 4f2ce31cb7 Copter: log PX4 and NuttX versions in logs 2014-01-14 15:38:51 +11:00
Andrew Tridgell e52f8d6598 Copter: prevent log corruption during log creation 2014-01-14 14:37:48 +11:00
Andrew Tridgell 8a41b18a1f Copter: use uppercase names on SD card where possible 2014-01-14 12:46:26 +11:00
Bill Bonney a6078cd281 Copter: Fix SYSID ranges to support GCS display of param correctly 2014-01-14 10:32:42 +09:00
Randy Mackay 138c2803be Copter: combine NTUN and INAV dataflash msgs 2014-01-13 22:00:11 +09:00
Randy Mackay 1e8a79eeaf Copter: add TimeMS, InavAlt to CTUN df msg 2014-01-13 21:31:43 +09:00
Randy Mackay 97b18314ac Copter: add time to ATT, MAG, CURR dataflash msgs 2014-01-13 20:46:54 +09:00
Randy Mackay df9d1614e2 Copter: remove PID logging
Almost never used and eats up limited log description space
2014-01-13 17:23:39 +09:00
Randy Mackay 5e0ddd299f Copter: disable OPTFLOW for SITL 2014-01-13 17:11:27 +09:00
Randy Mackay 61f319ce38 Copter: disable OPTFLOW for PX4/Pixhawk 2014-01-13 12:02:03 +09:00
Randy Mackay b3d20bb8aa TradHeli: Drift mode to use heli manual throttle 2014-01-10 11:06:06 +09:00
Robert Lefebvre 8b36c59d8b TradHeli: rename Stab_Col parameters
With H_ prefix they appear with the rest of the tradheli specific params in the parameter list.
2014-01-10 10:51:48 +09:00
Robert Lefebvre 794890884c TradHeli: enable Landing Collective when we are not moving
This prevents full negative pitch when touching down in Alt Hold or Auto-Landing.
2014-01-10 10:50:58 +09:00
Robert Lefebvre 531a9f4f25 TradHeli: disable AutoTune for Tradheli compile
We need the flash space, and this probably won't work for tradheli anyway since tradheli needs most of the control from Feedforward rather than P term.  And D-term is very very bad.
2014-01-10 10:50:09 +09:00
Randy Mackay 9f2f44f0f6 Copter: integrate shrunken optflow 2014-01-09 12:31:53 +09:00
Randy Mackay 1793ee804e Copter: remove armed check before logging 2014-01-07 22:43:49 +09:00
Randy Mackay 84881470b1 Copter: suspend logging while disarmed 2014-01-07 22:43:47 +09:00
Michael Oborne 757dd228d2 Copter: BugFix DO_SET_ROI returns Lat,Lon,Alt to GCS 2014-01-03 16:14:44 +09:00
Randy Mackay 99f851fc87 Copter: bugfix for starting in LOITER
Loiter's Roll-Pitch mode was not being set on start-up.
2013-12-30 17:18:10 +09:00