bugobliterator
f391445eaf
AP_Periph: move sysid_my_gcs to be public
2023-06-17 14:49:22 +10:00
Peter Barker
5a33f870c0
Tools: use HAL_PROXIMITY_ENABLED in place of HAL_PERIPH_ENABLE_PRX
...
boolean truth rather than defines, and simplifies code
2023-06-08 11:53:01 +10:00
Michael du Breuil
3fd2865857
Tools: AP_Periph: fix building of hwesc telem
...
This was broken by the APD support
2023-05-31 15:08:01 +10:00
Michael du Breuil
e2d0cc55d0
AP_Periph: Support APD ESC telemetry
2023-05-25 17:35:27 -07:00
Michael du Breuil
584a1f8c49
Tools: AP_Periph: Reduce the priority of outdoing ADS-B messages
...
We consume these at line rate from the transciever, don't allow this to
cause unnecessary congestion on the bus, as it may be used for flight
critical functions. A more proper solution would be to behave more like
the actual AP_ADSB library, and simple rate limit how often we send any
updates out to the host device, as well as filtering for distance, but
that requires more information then is currently readily available.
2023-05-25 16:59:32 -07:00
Peter Barker
274379ea8a
AP_Periph: include AP_ESC_Telem header
...
... since we insantiate one of these we should include its header
2023-05-09 10:56:13 +10:00
Peter Barker
6c29079a76
AP_Periph: correct includes
...
we instantiate SerialManager - best include its header!
2023-05-09 10:56:13 +10:00
Peter Barker
ddcfe5e734
Tools: move and rename CAN Driver_Type enumeration
2023-04-20 08:53:46 +10:00
Peter Barker
95d8719465
Tools: remove CANTester
2023-04-18 11:43:58 +10:00
Peter Barker
eb2a4a68c5
AP_Periph: use CopyFieldsFrom in CAN parameters
2023-04-18 11:43:58 +10:00
Tom Pittenger
34a990d2ff
AP_Periph: add AP_KDECAN support
2023-04-17 11:52:52 +10:00
Andrew Tridgell
c7231240c8
Tools: rename more variables, types and defines
2023-04-11 10:31:31 +10:00
Andrew Tridgell
7b4e4889c7
AP_Periph: use generated decoder for FW update and actuators
2023-04-10 14:46:54 +10:00
Andrew Tridgell
119b0b15f1
AP_Periph: cope with mixed bxCAN and CANFD packets
...
this allows for runtime switching of CANFD enable, while supporting
incoming bxCAN packets in CANFD mode
2023-04-10 14:46:54 +10:00
Andrew Tridgell
e6d6848fb1
AP_Periph: prepare for 1.5.0 release
2023-03-27 07:36:19 +11:00
Andrew Tridgell
7f66e35459
AP_Periph: release notes for 1.5.0
2023-03-27 07:35:41 +11:00
Peter Barker
ba3aa0c158
AP_Periph: add and use a "bool read(c)" method to AP_HAL
...
this is much less likely to not work vs the int16_t equivalent
2023-03-22 17:59:11 +11:00
Iampete1
8b36fde0c1
AP_Periph: fix proximity parameter path
2023-03-21 11:41:18 +11:00
Peter Barker
7995bc5175
Tools: add and use option to compile SLCAN support out of code
2023-03-15 19:08:09 +11:00
Andrew Tridgell
2781f65d56
AP_Periph: limit peripheral mag to 25Hz by default
...
we only read mag on the vehicles at 10Hz. Some magnetometers were
reporting data at 500Hz (see MMC5xx3 driver)
by sampling more slowly the data is accumulated and averaged on the
node which saves a lot of bandwidth
2023-03-06 17:24:29 -08:00
Andrew Tridgell
a4a52c3e8c
AP_Periph: cope with peripherals with i2c only rangefinders
...
if no uart then still check for non-uart sensors
2023-03-06 19:48:07 +11:00
Andrew Tridgell
d3bf7fc946
AP_Periph: rename CAN_PROBE_CONTINUOUS to AP_PERIPH_PROBE_CONTINUOUS
2023-03-06 19:48:07 +11:00
Tom Pittenger
223b91f6b4
Periph: fix sending GPS Heading packet at correct interval
2023-02-25 03:23:07 -08:00
Henry Wurzburg
59a5babc06
AP_Periph:Add SLCAN feature note
2023-02-24 09:22:34 +11:00
rishabsingh3003
32a0c8935e
AP_Periph: Fix hwesc telem temp units
2023-02-22 07:12:47 +11:00
Pierre Kancir
b7b08c3487
AP_Periph: add patch rev into firmware version
2023-02-08 12:47:49 +11:00
Tom Pittenger
95b4ded3e8
AP_Periph: add AP_NMEA_Output to Periph
2023-02-07 21:12:07 +11:00
rishabsingh3003
59bc3cff93
AP_Periph: Allow user to change serial port for HW Telem
2023-01-25 18:15:28 +11:00
Iampete1
43e5ea43b7
Tools: AP_Periph: use shared Param info defines
2023-01-11 18:41:34 +11:00
Peter Barker
65915441b6
Tools: make check_var_info void
...
Given all the callers die anyway, make it void
2023-01-10 10:48:15 +11:00
Iampete1
bba1d0b9d9
AP_Periph: rename airspeed param group to match vehicles
2023-01-03 10:17:56 +11:00
Iampete1
cb6891821e
AP_Periph: always call airspeed init to allow param conversion
2023-01-03 10:17:56 +11:00
Andrew Tridgell
69cb6796f3
AP_Periph: send GNSS Heading message
...
if not sending RelPosHeading then send Heading message if we have yaw
2022-12-20 10:23:58 +11:00
Andrew Tridgell
dcab2d2f2a
AP_Periph: cope with GPS without yaw accuracy
2022-12-20 10:23:58 +11:00
Peter Barker
d438c8e127
AP_Periph: code-generate chan-fetching methods
...
A recent PR had to change every single one of these methods, which was kind of unfortunate.
So generate the methods using a #define so the duplication happens at preprocessor-time.
2022-12-15 08:31:54 +11:00
rishabsingh3003
27f55ae626
AP_Periph: Add proximity support
2022-12-15 07:20:05 +11:00
James O'Shannessy
11ab5e3f3d
AP_Periph: Adds a parameter to allow for user configurable timeout
...
Timeout defaults to 200ms. Timeout can be disabled by setting parameter to 0. Timeout should be configured to be able to handle at small number of missed packets.
2022-12-03 13:55:01 +11:00
James O'Shannessy
4679cb4265
AP_Periph: Add timeout to ESC driving when CAN packets are lost
...
Fixes a periph continuing to drive an ESC to an output when the esc_rawcommand packets are lost
2022-12-03 13:55:01 +11:00
bugobliterator
3ec938fae6
waf: add dynamic source option to ap_stlib
2022-11-16 18:05:59 +11:00
bugobliterator
e4ada09fc3
waf: use bld for dronecangen export headers for including
2022-11-16 18:05:59 +11:00
Tom Pittenger
4e94046a4a
AP_Periph: can_printf() to send longer strings using multiple packets
2022-10-23 21:47:42 -07:00
Tom Pittenger
3f4755ea7b
AP_Periph: add support for AP_TemperatureSensor
2022-10-18 10:05:31 +11:00
Tom Pittenger
53e0c4175e
AP_Periph: add support for SLCAN
2022-10-11 11:26:40 +11:00
Tom Pittenger
0767640372
AP_Periph: fix periph-heavy build, wscript
2022-10-11 11:20:50 +11:00
Peter Barker
3cbd018877
AP_Periph: correct build for EFI can
...
no longer an array
2022-10-05 18:03:59 +11:00
Andrew Tridgell
aa757501f4
AP_Periph: removed the old DroneCAN Fix message
...
only send/process Fix2 message, saving bus bandwidth and flash space
2022-09-28 17:27:32 +10:00
Andrew Tridgell
304d7472ff
AP_Periph: update release notes for 1.4.1
2022-09-28 07:24:27 +10:00
Andy Piper
8ee5c8735d
AP_Periph: delegate dshot configuration to BLHeli. Make esc telemetry output rate configurable
...
correct SRV_Channel initialization order to get ESC masks correct
2022-09-20 09:45:03 +10:00
Peter Barker
25c3665277
Tools: populate sysid/compid in reboot ACK
2022-09-14 20:16:38 +10:00
Andrew Tridgell
31cac4395f
AP_Periph: support actuator type with PWM
...
this makes debugging much easier in CAN analyser
2022-09-13 16:23:44 +10:00
bugobliterator
939bd94796
AP_Periph: make constants used in bitshift unisigned
2022-09-08 13:37:55 +10:00
bugobliterator
3e8355638b
AP_Periph: add support for redundant CAN bus
2022-09-08 13:37:55 +10:00
Andrew Tridgell
1fab01951a
AP_Periph: build fix
2022-09-05 12:35:37 +10:00
Andrew Tridgell
a92cb1017e
AP_Periph: report unsigned bootloader flash attempt
2022-09-05 12:35:37 +10:00
Andrew Tridgell
4bed47cbb0
AP_Periph: raise master version to 1.5 dev
2022-09-04 15:15:22 +10:00
Andrew Tridgell
c5fb666b0f
AP_Periph: release notes for 1.4.0
2022-09-04 15:14:27 +10:00
Andrew Tridgell
a4fa99c96c
AP_Periph: fixed undulation in Fix2 pkt
2022-08-28 11:43:01 +10:00
Andrew Tridgell
2637f87409
AP_Periph: ensure we don't send inf in Fix and Fix2 for GPS
2022-08-28 11:43:01 +10:00
Andrew Tridgell
5fd9891880
AP_Periph: release notes for 1.4.0beta1
2022-08-27 15:55:55 +10:00
Andrew Tridgell
2f3fe19aca
AP_Periph: use AP_CheckFirmware
2022-08-15 09:18:34 +10:00
Andrew Tridgell
cc2589777f
AP_Periph: pass correct WGS84 height on GPS peripherals
2022-08-10 05:04:18 +10:00
bugobliterator
c4b182978a
AP_Periph: add support for starting sitl periph in maintenance mode
2022-07-27 18:18:03 +10:00
bugobliterator
cdb14bd75d
AP_Periph: enlarge CANARD pool for CANFD messages
2022-07-27 18:18:03 +10:00
Iampete1
18351186db
AP_Periph: set defualt format version
2022-07-20 17:59:59 +10:00
Peter Barker
4561e78dd5
AP_Periph: include GCS_MAVLink.h for firmware version type define
2022-07-16 17:15:52 +10:00
Andrew Tridgell
5a36d7cf0a
AP_Periph: fixed non-contiguous mask for ESC telem output
...
this fixes the case where a peripheral node has an ESCs that are not
starting at the first channel. Reported here:
https://discuss.ardupilot.org/t/using-matekl431-adapters-for-pwm-and-dshot/85781/22
tested on MatekL431-Periph
2022-06-15 18:16:22 +10:00
Randy Mackay
b9f4998fd8
AP_Periph: remove ToshibaCAN from param descriptions
2022-06-10 12:08:05 +09:00
Andrew Tridgell
f728894eec
AP_Periph: added EFI support
2022-06-09 21:10:37 +10:00
Andrew Tridgell
25d231187f
AP_Periph: added RNGFND_MAX_RATE parameter
...
prevent duplicate samples and allow setting of maximum rate we sample
rangefinder
2022-06-09 16:51:56 +10:00
Pradeep
80e2533cf0
AP_Periph: node stats
...
- Added new config parameter object - STAT
- init and update statistics
2022-06-07 09:57:32 +10:00
Pradeep
183352cdfe
AP_Periph: choose node stats - build files
...
Added - AP_Stat library and AP_STATS_ENABLED build options
2022-06-07 09:57:32 +10:00
Andrew Tridgell
5e184e167c
AP_Periph: allow peripherals to handle servos beyond 16
2022-05-22 12:07:37 +10:00
Andrew Tridgell
10d7a559d2
AP_Periph: 32 servo conversion
2022-05-22 12:07:37 +10:00
Andrew Tridgell
406de11fe9
AP_Periph: mark ESC DShot channels as digital
...
this allows them to get the right default MIN and MAX values on the
channels
2022-04-28 13:56:41 +10:00
Andrew Tridgell
227e82053a
AP_Periph: fixed GPS dropout on F4 and L4 GPS nodes
...
we need more time for other threads on these nodes or we will end up dropping GPS frames
2022-04-18 14:40:53 +10:00
Andrew Tridgell
fbc9b771d1
AP_Periph: updated release nodes for 1.3.1
2022-04-15 13:48:31 +10:00
bugobliterator
7f5dc33e7e
AP_Periph: allow can_printf as periph member method as well
2022-03-23 18:59:43 +11:00
Andrew Tridgell
994e1e0c0a
AP_Periph: mark version as 1.4.0dev
2022-03-18 21:16:13 +11:00
Andrew Tridgell
59456b4f82
AP_Periph: updated release notes for 1.3.0
2022-03-18 21:14:07 +11:00
Andrew Tridgell
116c692e2b
AP_Periph: rename ReleaseNotes.txt
...
be consistent with plane and copter
2022-03-18 21:14:04 +11:00
bugobliterator
29673de4f3
AP_Periph: add parameters for setting up FD Bitrates
2022-03-11 18:13:54 +11:00
Siddharth Purohit
8a8de73d89
AP_Periph: add support for CANFD trx
2022-03-11 18:13:54 +11:00
bugobliterator
068208e4d7
AP_Periph: add debug option for hold in bootloader after 15s
2022-03-11 18:13:54 +11:00
Andrew Tridgell
0853accea1
AP_Periph: fixed moving baseline yaw for single CAN peripherals
...
the AP_GPS_UAVCAN driver requires this param for auto-config of MB yaw
on DroneCAN GPS
2022-03-09 07:52:42 +11:00
Andrew Tridgell
335ab3aac1
AP_Periph: fixed build
2022-02-22 12:13:19 +11:00
Andrew Tridgell
94d02faf37
AP_Periph: fixed build for include changes
2022-02-22 12:13:19 +11:00
Nathan Costa
a867e04116
AP_Periph: airspeed add support for CAN/I2C switch and LED
2022-02-16 13:25:58 +11:00
Peter Barker
a81a1fb19f
Tools: build ArduPilot against all.xml not ardupilotmega.xml
2022-02-08 11:00:41 +11:00
Peter Barker
b7df2bce5f
Tools: provide default implemenation of handle_change_alt_request
...
The TODO items to actually implement these are almost 6 years old.
Since then these methods have been burning space.
This doesn't even make sense for several vehicles, so a default
implementation which does nothing seems OK.
2022-02-08 10:59:13 +11:00
Joshua Henderson
2ea33324a0
AP_Periph: add define for BARO_ENABLE
2022-02-08 10:41:02 +11:00
Joshua Henderson
0339f09b07
AP_Periph: use AP_PERIPH_RANGEFINDER_PORT_DEFAULT
2022-02-02 18:45:59 +11:00
Andrew Tridgell
c2dd7f4c9e
AP_Periph: fixed LED setup call
2022-01-27 08:26:47 +11:00
bugobliterator
9469817e03
AP_Periph: send epoch time for both message and GNSS timestamp
2022-01-20 17:26:35 +11:00
Joshua Henderson
92aff3bded
AP_Periph: use airspeed.set_log_bit()
2022-01-19 18:21:32 +11:00
Peter Barker
ef11400e13
Tools: make C_TO_KELVIN a function macro; create KELVIN_TO_C
...
These are in celsius
2022-01-13 18:31:46 +11:00
Andrew Tridgell
d62e946d48
AP_Periph: fixed temperature reporting
...
more common to have ESC temp than motor temp, so report ESC
temperature
2021-12-28 16:30:14 +11:00
Shiv Tyagi
d1eedcb4c3
AP_Periph: remove PacketDitial from AP_CANManager parameter description
...
We have removed the class AP_BattMonitor_MPPT_PacketDigital, we should also remove these
2021-12-17 20:24:25 +09:00
Peter Barker
1d4b13af08
AP_Periph: correct compilation when both periph-adsb and GCS enabled
...
Get lots of these otherwise:
/home/pbarker/gcc/gcc-arm-none-eabi-10.3-2021.07/bin/../lib/gcc/arm-none-eabi/10.3.1/../../../../arm-none-eabi/bin/ld: lib/libAP_Periph_libs.a(GCS_MAVLink.cpp.0.o): in function `mavlink_parse_char':
GCS_MAVLink.cpp:(.text.mavlink_parse_char+0x0): multiple definition of `mavlink_parse_char'; Tools/AP_Periph/adsb.cpp.41.o:adsb.cpp:(.text.mavlink_parse_char+0x0): first defined here
/home/pbarker/gcc/gcc-arm-none-eabi-10.3-2021.07/bin/../lib/gcc/arm-none-eabi/10.3.1/../../../../arm-none-eabi/bin/ld: lib/libAP_Periph_libs.a(GCS_MAVLink.cpp.0.o): in function `put_bitfield_n_by_index':
GCS_MAVLink.cpp:(.text.put_bitfield_n_by_index+0x0): multiple definition of `put_bitfield_n_by_index'; Tools/AP_Periph/adsb.cpp.41.o:adsb.cpp:(.text.put_bitfield_n_by_index+0x0): first defined here
2021-12-14 10:35:06 +11:00
Andrew Tridgell
75959450ca
AP_Periph: cope with GCS enabled for ESC telem
...
thanks Tom!
2021-12-10 08:11:24 -08:00
Andrew Tridgell
d239bf99bd
AP_Periph: enable use of AP_ESC_Telem in peripheral nodes
...
give ESC status packets back for RPM, voltage, current etc
2021-12-10 08:11:24 -08:00