Michael du Breuil
47dfafd670
Plane: Ensure that the plane is an appropriate distance out before starting the approach
2018-12-18 10:11:22 +11:00
Michael du Breuil
05484c3987
Plane: Support a different landing airspeed for fw quadplane landings
2018-12-18 10:11:22 +11:00
Michael du Breuil
1a45755ffd
Plane: Support a different landing radius for quadplane fw approach
2018-12-18 10:11:22 +11:00
Michael du Breuil
f1154a6e7c
Plane: Pass the mission command around rather then fetching it
2018-12-18 10:11:22 +11:00
Michael du Breuil
42e67d5849
Plane: Whitespace fixes
2018-12-18 10:11:22 +11:00
Michael du Breuil
e8885ee1a5
Plane: Fly a planned abort sequence if available
2018-12-15 09:03:25 +11:00
Nikhil Upadhye
d1e93bae83
Plane: adding new mode QAUTOTUNE
...
copter like autotune support for quadplanes and tailsitter in VTOL mode.
cleanup
2018-12-14 16:33:11 +11:00
Peter Barker
9d323b4b90
Plane: move accept_packet to GCS_MAVLink base class
2018-12-14 12:44:31 +11:00
Peter Barker
56675851b6
Plane: DataFlash uses AP_Mission singleton
2018-12-13 14:45:30 +09:00
Peter Barker
2978da5ecd
Plane: GCS_MAVLink now uses Mission singleton
2018-12-13 10:52:52 +09:00
Peter Barker
bcf68a9103
Plane: split MSG_SCALED_PRESSURE into three separate messages
2018-12-12 21:36:01 +11:00
Peter Barker
a263364959
Plane: GCS_MAVLink uses dataflash singleton
2018-12-11 08:43:47 +09:00
Michael du Breuil
f3a843ebf7
Plane: Fix a comma in bitmask that was breaking emitters
2018-12-11 10:24:40 +11:00
Peter Barker
153228bef5
Plane: call GCS update functions at quadcopter main loop rate
2018-12-10 12:52:41 +09:00
Peter Barker
18d4df8d4f
Plane: split MSG_RAW_IMU1 into per-IMU ap_messages
2018-12-10 12:52:41 +09:00
Peter Barker
67042d39d1
Plane: send both SYS_STATUS or POWER_STATUS or neither
2018-12-10 12:52:41 +09:00
Peter Barker
d1727d26a1
Plane: rename send_extended_status1 to send_sys_status
2018-12-10 12:52:41 +09:00
Peter Barker
7f5c0db949
Plane: adjust for new update entry points into GCS
2018-12-10 12:52:41 +09:00
Peter Barker
1ca67df663
Plane: add parameter stream to list-of-all-streams
2018-12-10 12:52:41 +09:00
Andrew Tridgell
fa04c2d094
Plane: prevent jitter on surfaces due to speed scaling
...
when disarmed the k_throttle output can oscillate due to stage in the
loop we are at, even though actual output is zero. This can cause
jitter in the speed scaling, which causes surface movement
To fix, don't use k_throttle value when disarmed
2018-12-06 17:44:11 +11:00
Randy Mackay
71708ee4ea
Plane: quadplane uses set_defaults_from_table
2018-12-06 12:23:41 +09:00
Peter Barker
edd4f6d14d
Plane: rename MSG_EXTENDED_STATUS2 to MSG_MEMINFO
2018-12-04 18:01:38 +11:00
Peter Barker
de479032ba
Plane: rename MSG_RAW_IMU2 and MSG_RAW_IMU3 to reflect what they send
2018-12-04 17:45:32 +11:00
Andrew Tridgell
6c7af3830b
Plane: apply throttle slew to dual-motor setups
...
thanks to Alex for noticing this issue
2018-12-04 09:08:31 +11:00
IamPete1
c6e70c0454
Plane: add roll limit for tailsitters
...
Quadplane: add tailsitter pitch params
2018-12-01 09:40:07 +11:00
Andrew Tridgell
b6519c88a5
Plane: fixed a bug in Q_ASSIST_ modes for tiltrotors
...
when a tilt-rotor drops below Q_ASSIST_SPEED we need to keep it in the
airspeed wait state until it has regained airspeed, otherwise we will
end up with too low throttle
2018-11-30 18:17:42 +11:00
Leonard Hall
0943ace7a9
Plane: Zero Yaw correction during transition
...
and relax attitude controller when not using lift motors.
2018-11-30 18:16:29 +11:00
Andrew Tridgell
c081ce9adb
Plane: don't relax attitude controllers for tailsitters
...
this fixes an issue with testing control movement when disarmed
2018-11-30 13:01:53 +11:00
Peter Barker
ba3a369651
Plane: remove update_events scheduler shim
2018-11-27 10:07:13 +11:00
Michael du Breuil
1e220d3d37
Plane: Add support for mode change to QLand as a failsafe
2018-11-24 14:37:04 -08:00
Peter Barker
d4e88bc6ba
Plane: remove pointless wrappers around RC_Channels functions
2018-11-23 10:56:17 +11:00
Peter Barker
03b71e1123
Plane: remove pointless wrappers around gcs functions
2018-11-23 10:56:17 +11:00
Andrew Tridgell
4d8fbdfcfd
Plane: fixed spoiler left rudder order
...
thanks to @jgilbertfpv for noticing
2018-11-20 20:10:00 +11:00
Andrew Tridgell
1d00d26b9e
Plane: added parameters for crow flaps
...
DSPOILER_CROW_W1 and DSPOILER_CROW_W2 for inner and outer control
surfaces
2018-11-20 10:00:38 +11:00
jgilbertfpv
4d6547c533
Plane: added crow brakes and diff. spoilers
...
added crow braking via flap channel to differential spoilers and
reversed dspoiler outputs because having the inner elevon go up and
outer go down causes tip stall. now inner goes down, outer goes
up. still could use a percentage adjustment to change how much throw
each surface gets when using flap input.
2018-11-20 10:00:38 +11:00
Andrew Tridgell
987b556299
Plane: disable crash detection if no GPS and no airspeed
2018-11-19 07:32:20 +11:00
Andrew Tridgell
b660022b20
Plane: handle long GPS loss in crash detector
...
fixes issue #9349
2018-11-19 07:32:20 +11:00
DOMINATOR\Eugene
802ae94e2c
ArduPlane: move airspeed update to library
2018-11-17 07:52:42 +11:00
Andrew Tridgell
03f1deca9f
Plane: support REVERSE_THROTTLE rc option
...
this provides a more convenient way to setup for reverse throttle
2018-11-16 08:33:35 +11:00
Andrew Tridgell
da69bf3391
Plane: added an abstraction for reverse thrust
...
use have_reverse_thrust() and get_throttle_input()
2018-11-16 08:33:35 +11:00
Peter Barker
a5c34f6172
Plane: OpticalFlow takes care of its own logging
2018-11-13 10:40:23 +11:00
Peter Barker
e53a009a35
Plane: do not pass ahrs to opticalflow constructor
2018-11-13 10:40:23 +11:00
Peter Barker
12c67ecaab
Plane: move sending of optical flow status up to base class
2018-11-13 10:40:23 +11:00
Andrew Tridgell
c59b2c156a
Plane: fixes for Q_TRIM_PITCH
...
improved documentation and variable names
2018-11-12 17:05:04 +11:00
IamPete1
5a7bd61e8c
Quadplane: add trim params
2018-11-12 17:05:04 +11:00
Andrew Tridgell
85a1f9e40d
Plane: added ACCZ pid tuning
2018-11-12 15:36:39 +11:00
Andrew Tridgell
432d786f82
Plane: pass height to landing gear update
2018-11-10 21:24:19 +11:00
Michael du Breuil
8ce0460daf
Plane: Remove old parameter conversion
2018-11-10 18:58:54 +11:00
Michael du Breuil
8e906e0ba0
Plane: Add support for a loiter to alt approach to VTOL landing
2018-11-10 18:58:54 +11:00
Andrew Tridgell
f89c770c46
Plane: moved LANDING_GEAR to common RC_Channel
2018-11-09 14:35:14 +11:00
