Peter Barker
7ce353e652
AP_HAL_PX4: use HAL_SEMAPHORE_BLOCK_FOREVER macro
2017-05-08 10:23:03 +09:00
Andrew Tridgell
b72532164b
AP_HAL_PX4: rename macros to avoid conflicts
...
these macros were also defined in NuttX in clock.h
2017-05-06 15:21:14 +10:00
Andrew Tridgell
37166301c9
HAL_PX4: use sensor_config_error()
2017-05-03 11:37:02 +10:00
Peter Barker
3ff4cd8c07
AP_HAL_PX4: use HAL_SEMAPHORE_BLOCK_FOREVER
2017-05-01 15:05:51 +01:00
Andrew Tridgell
9bdb6838e6
HAL_PX4: cope with nested cork/push
2017-05-01 14:32:18 +10:00
Francisco Ferreira
7dca7933fa
AP_HAL_PX4: fix UAVCAN armed state to depend on safety switch
2017-04-27 14:04:56 +01:00
Francisco Ferreira
965eda69f3
AP_HAL_PX4: remove left-overs of legacy UAVCAN support
2017-04-27 13:32:43 +01:00
Andrew Tridgell
ca4cde9770
HAL_PX4: fixed safety switch light pattern
...
this was broken by the recent CAN merge. My fault for not checking it
carefully. We have to publish the armed state so the fmu driver on
pixracer can update the light
2017-04-27 13:32:43 +01:00
Andrew Tridgell
3415dfb46c
HAL_PX4: implement split transfers for I2C
2017-04-18 18:15:04 +10:00
Eugene Shamaev
0c4a68314b
AP_HAL_PX4: removal of legacy UAVCAN support
2017-04-17 17:27:18 +10:00
Pierre Kancir
a2eeab4db7
AP_HAL_PX4: example fix travis warning
...
missing function declaration
implicit cast
some style fix
2017-04-13 19:56:16 +01:00
Eugene Shamaev
55a0bd081f
AP_HAL_PX4: ESC scaling
2017-04-10 22:38:12 +01:00
Eugene Shamaev
7caeaf4be6
AP_HAL_PX4: RCOutput support for UAVCAN
2017-04-10 22:38:12 +01:00
Eugene Shamaev
865392f034
AP_HAL_PX4: CAN bus driver
2017-04-10 22:38:12 +01:00
Andrew Tridgell
dbfdfa2261
HAL_PX4: fixed a bug in setup of alt rates for upper channels
...
this affected vehicles with high rates on upper channels, such as hexa
and octa quadplanes. The bug caused the rates set on the upper channels
to also be set on the primary channels, which means the low channels
containing aileron, elevator etc ran at 400Hz instead of 50Hz, resulting
in potential damage to the servos
2017-04-07 20:32:19 +10:00
Andrew Tridgell
a8b12dcf3c
HAL_PX4: never wait on a semaphore in interrupt context
...
this shouldn't ever happen, but better to check
2017-04-07 18:16:14 +10:00
Peter Barker
724be3878c
AP_HAL_PX4: correct output of system-id on px4-v3
2017-04-03 14:14:59 +10:00
Andrew Tridgell
02976168cc
HAL_PX4: fixed RC rate when BRD_PWM_COUNT=0
...
if BRD_PWM_COUNT is zero then alt_fd is -1, and we were not setting
servo output rate
2017-04-03 10:05:30 +09:00
Lucas De Marchi
7c246847de
AP_HAL_PX4: replace board ifdef with feature ifdef
2017-03-24 12:06:19 +11:00
Lucas De Marchi
2e4e4365d0
AP_InertialSensor: enable fast sampling for aerofc
2017-03-24 12:06:19 +11:00
Lucas De Marchi
7c1f255258
AP_HAL_PX4: add pin to monitor battery
2017-03-24 12:06:19 +11:00
Lucas De Marchi
91dabbe418
AP_HAL_PX4: implement method to ajust periodic callback
...
Just setting up the periodic callback sampling time on initialization
may not work well for sensors that need to request for a sample with a
bus transaction, sleep and then read the new data. That's because the
function will be kept calling at a periodic rate, while the time in
which we can read the value is not really that sampling time, but rather
the time in which sensor was last read + the time spent in the function
before sending a new sample request.
Instead of creating a new type of thread to handle this case, just
implement the minimal and easy case of updating the period for this
callback, that can only be called from inside the callback function.
2017-03-24 12:06:19 +11:00
Lucas De Marchi
2349909033
AP_BoardConfig: start mtd driver
2017-03-24 12:06:19 +11:00
Lucas De Marchi
fad583b259
AP_HAL_PX4: RCOoutput_Tap: map to [ RPMSTOPPED, RPMMAX ] range
...
When it's not armed we get _esc_pwm_min from the AP_Motors library,
which would cause motors to start spinning. Map it to start from
RPMSTOPPED so it doesn't spin when it's not armed.
2017-03-24 12:06:19 +11:00
Lucas De Marchi
5e26940070
AP_HAL_PX4: disable safety switch for aerofc
2017-03-24 12:06:19 +11:00
Lucas De Marchi
327de91b5c
AP_HAL_Px4: use RCOutput_Tap for aerofc
2017-03-24 12:06:19 +11:00
Lucas De Marchi
75977cd890
AP_HAL_PX4: implement motor output for aerofc
...
This uses tap ESCs, as found on the PX4 project, translated to our
internal APIs. It doesn't have the feedback from ESCs yet.
2017-03-24 12:06:19 +11:00
Lucas De Marchi
ce9013b8ee
AP_HAL_PX4: add RCOutput skeleton for aerofc
2017-03-24 12:06:19 +11:00
Lucas De Marchi
87846fe049
AP_InertialSensor: use MPU6500 on aerofc
2017-03-24 12:06:19 +11:00
Lucas De Marchi
b4d0569339
AP_HAL_PX4: Use empty RCOutput driver for aerofc
2017-03-24 12:06:19 +11:00
Lucas De Marchi
00c2949dfb
Add support for baro on aerofc
2017-03-24 12:06:19 +11:00
Lucas De Marchi
b17acfee12
Add aerofc support
...
Flight Controller board that comes on Intel Aero RTF Drone.
2017-03-24 12:06:19 +11:00
Siddharth Bharat Purohit
5029dd1bab
AP_HAL_PX4: GPIO: return correct FMU pin read even if IO not connected/detected
2017-03-22 12:15:05 +11:00
Andrew Tridgell
fc4caf51e9
HAL_PX4: fixed RC failsafe for SBUS on FMUv4
...
the FMUv4 SBUS parser sets timestamp_last_signal even if we are in
failsafe
thanks to Mark Whitehorn for finding this
2017-03-18 17:36:13 +11:00
Lucas De Marchi
f972fed70b
AP_HAL_PX4: rename method to follow AP_HAL
...
This allows to avoid the cast in the HAL, making it easier to replace
the implementation with an Empty::RCOutput while prototyping.
2017-02-26 13:38:24 +11:00
Lucas De Marchi
e1eda3066c
AP_HAL_PX4: SPIDevice: add missing ifdefs
...
These sensors may always be present on px4fmu* boards, but they are not
always present for all boards supported by the PX4Firmware.
2017-02-26 13:37:13 +11:00
Andrew Tridgell
787a2093ec
HAL_PX4: fixed motor test for brushed motors
...
this fixes zero pwm output on a subset of channels. When using
motortest and asking for a single channel, multiple channels fired due
to an incorrect optimisation
2017-02-02 09:27:48 +09:00
murata
9b1dadd93e
AP_HAL_PX4: Unify from print or println to printf.
2017-01-27 18:20:22 +11:00
iseries1
e6a643f805
AP_HAL: define pixracer LED pins
2017-01-27 11:01:17 +09:00
Andrew Tridgell
1bd9d0b7f9
HAL_PX4: cleanup whitespace
2017-01-12 17:39:37 +11:00
Andrew Tridgell
05d9455f87
Revert "HAL_PX4: Add input parameter check."
...
This reverts commit 5f41b09fde
.
This change is completely incorrect. It is quite common to do SPI
transfers with zero send bytes, and is required for many sensors and
other devices
2016-12-07 12:47:10 +11:00
murata
d619d33374
AP_HAL_PX4: UARTDriver: Delete the condition that does not hold.
2016-12-05 16:53:36 -08:00
Andrew Tridgell
e2192d5b4d
HAL_PX4: report user bus number not system bus number
2016-12-05 16:51:49 -08:00
murata
5f41b09fde
HAL_PX4: Add input parameter check.
2016-12-02 17:09:47 -08:00
Andrew Tridgell
23480a92ad
HAL_PX4: only include parts needed for build
...
allow for external USE_FLASH_STORAGE define in build
2016-12-02 09:58:36 +11:00
Andrew Tridgell
6bc0c76d54
HAL_PX4: update for new AP_FlashStorage API
...
allow flash sector erase while disarmed
2016-12-02 09:49:40 +11:00
Andrew Tridgell
a66924422f
HAL_PX4: implement optional flash backend for storage
...
this allows the last two flash sectors to be used as storage for
parameters, waypoints etc.
A change to the bootloader to not erase the last two sectors is needed
2016-12-02 09:49:39 +11:00
Andrew Tridgell
b0832e6c15
HAL_PX4: factor out storage functions
...
ready for multiple backends
2016-12-02 09:49:39 +11:00
Andrew Tridgell
d4f679f954
HAL_PX4: removed support for old storage files on microSD
2016-12-02 09:49:39 +11:00
Andrew Tridgell
4cfd63c30a
HAL_PX4: refactor storage to use bitmask class
2016-12-02 09:49:39 +11:00