Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
64,146 Commits 71 Branches 509 Tags 747 MiB
Commit Graph

64146 Commits

Author SHA1 Message Date
Clyde McQueen 872cbc72ff autotest: MAV_CMD_DO_REPOSITION in sub 2024-07-25 10:44:16 +10:00
Clyde McQueen 297fcfd777 Sub: handle MAV_CMD_DO_REPOSITION 2024-07-25 10:44:16 +10:00
Leonard Hall 1012be95d8 Copter: Ground oscillation gain reduction 2024-07-25 09:50:35 +10:00
Leonard Hall 2ab3d0b3b0 AC_AttitudeControl: Add Landed Gain Backoff 2024-07-25 09:50:35 +10:00
muramura 84ff78f5c6 AP_Notify: Perform common checks first 2024-07-25 09:50:03 +10:00
James O'Shannessy 66817e207f AP_InertialSensor: Check the gyro/accel id has not been previously registered 
If the Gyro/Accel ID is already in the registered list, do not try to add it again.

This stops an issue seen on a CubeOrangePlus BG3 where, during the very first boot after a parameter wipe, software incorrectly registers a fourth IMU.
The Fourth IMU is registered because the AUX IMU is the same DevID as the third ICM45686.
 2024-07-25 09:49:35 +10:00
Ep Pravitra fe2e75b2a0 Plane: option to immediately climb in AUTO mode (not doing glide slope) 
add comment in Parameters.cpp

Update ArduPlane/altitude.cpp

Co-authored-by: Peter Hall <33176108+IamPete1@users.noreply.github.com>

clarification in FLIGHT_OPTIONS description

change the comment

param comment change

Update ArduPlane/Parameters.cpp

Co-authored-by: Peter Barker <pb-gh@barker.dropbear.id.au>
 2024-07-25 09:49:07 +10:00
Luca Pescante 9acd23d196 autotest: use RC6 for tuning 2024-07-25 09:40:13 +10:00
Luca Pescante 0583e85145 Copter: update "CH6 tuning" comments 2024-07-25 09:40:13 +10:00
Luca Pescante a519597249 Copter: find channel option "Transmitter Tuning" instead of CH6 2024-07-25 09:40:13 +10:00
Luca Pescante 028017e38e ArduCopter/RC_Channel: add option 219 
(Transmitter Tuning)
 2024-07-25 09:40:13 +10:00
bugobliterator 8a4b925c71 AP_HAL_ChibiOS: add support for PPP between CubeRed Primary and Secondary 2024-07-25 09:37:16 +10:00
bugobliterator 4909ad4e4f AP_Networking: add debug code for PPP 2024-07-25 09:37:16 +10:00
bugobliterator 993d694fbb AP_HAL_ChibiOS: allow setup for low noise clock mismatch tolerant UART line 2024-07-25 09:37:16 +10:00
bugobliterator 025077b6f4 AP_HAL_ChibiOS: add support for recording UART Rx errors 2024-07-25 09:37:16 +10:00
mduclehcm 25a406e633 AP_Mount: Conditionally define `serial_instance` to fix unused variable compile error 
- Wrapped the definition of `serial_instance` with preprocessor directives to ensure it is only defined when necessary.
- This resolves the compile error caused by the unused variable when no features requiring `serial_instance` are enabled.
 2024-07-25 09:35:46 +10:00
Paul Riseborough 4904c718a5 AP_NavEKF3: Fix yaw alignment bug 
When the  yaw is aligned to the GPS yaw, the recordYawResetsCompleted() function should be called the same as for any other yaw reset.
 2024-07-25 09:34:48 +10:00
muramura 05d8b0db8a Copter: Clearly show the preprocessor 2024-07-24 18:04:12 +09:00
muramura f9bc247121 Copter: correct comment about scope of is_landing and is_taking_off 2024-07-24 18:31:00 +10:00
rishabsingh3003 07b6c57173 AP_TemperatureSensor: Extend analog sensor backend to 5th order polynomial 2024-07-24 17:53:08 +10:00
bugobliterator 941f16cd8e bootloaders: update PPPGW bootloaders 2024-07-24 17:47:23 +10:00
bugobliterator e499c2d39f AP_Bootloader: fix stuck in bl on reboot from firmware with network and CAN bootlaoders 2024-07-24 17:47:23 +10:00
rishabsingh3003 3ab3388752 AP_ESC_Telem: Add ifndef before defining ESC_TELEM_MAX_ESCS 2024-07-24 17:45:24 +10:00
bugobliterator 3e8b5ccee4 AP_Bootloader: fix build for STM32H7 without heap 
disables ecc check for those boards as well
 2024-07-24 17:30:23 +10:00
Randy Mackay 2b64787099 AP_Mount: topotek spelling fix 2024-07-24 17:28:24 +10:00
Randy Mackay cfd1e98333 AP_Mount: topotek safely parses version 2024-07-24 17:28:24 +10:00
Randy Mackay efc7a9071a Copter: SmartRTL mode restores point if interrupted 2024-07-24 17:22:44 +10:00
Randy Mackay 1b77751aef AP_SmartRTL: add point made public 2024-07-24 17:22:44 +10:00
Henry Wurzburg 76abc6850f Filter: add "source" to option 5 2024-07-24 17:20:30 +10:00
Randy Mackay a1579bc31e SITL: integrate SlungPayload 2024-07-24 17:09:06 +10:00
Randy Mackay 5c2b758f42 SITL: add SlungPayload 2024-07-24 17:09:06 +10:00
George Zogopoulos cb044d4718 Tools: Optionally include AP_SIM_GLIDER_ENABLED on SIH 2024-07-24 17:03:48 +10:00
George Zogopoulos e170710de9 SITL: Glider improvements 
Fixed balloon going below ground.
Enabled glider torque logging.
 2024-07-24 17:03:48 +10:00
Peter Barker bedc76e0e8 autotest: tidy various tests to take account of new framework capabilities 
autotest: simplify AutoDock test

autotest: tidy AP_Proximity_MAV test

autotest: tidy DriveSquare test

autotest: tidy BatteryFailsafe test

autotest: tidy GPSViconSwitching test

autotest: tidy RangeFinder test
 2024-07-24 17:01:26 +10:00
Peter Barker 478d26d69c AP_Notify: rename LED_1 pin define to AP_NOTIFY_GPIO_LED_1_PIN 2024-07-24 09:13:50 +10:00
Peter Barker a4577685a7 AP_HAL_ChibiOS: rename LED_1 pin define to AP_NOTIFY_GPIO_LED_1_PIN 2024-07-24 09:13:50 +10:00
Peter Barker 7f1b7182fb Tools: add AP_RSSI_ENABLED to build_options.py 2024-07-24 09:11:39 +10:00
Peter Barker 3def5f7433 Rover: correct compilation with AP_RRSI_ENABLED false 
Co-authored-by: David Buzz <davidbuzz@gmail.com>
 2024-07-24 09:11:39 +10:00
Peter Barker 3e54ecfece Blimp: correct compilation with AP_RRSI_ENABLED false 
Co-authored-by: David Buzz <davidbuzz@gmail.com>
 2024-07-24 09:11:39 +10:00
Peter Barker c451518bdd ArduPlane: correct compilation with AP_RRSI_ENABLED false 
Co-authored-by: David Buzz <davidbuzz@gmail.com>
 2024-07-24 09:11:39 +10:00
Peter Barker 6dac230ccb ArduCopter: correct compilation with AP_RRSI_ENABLED false 
Co-authored-by: David Buzz <davidbuzz@gmail.com>
 2024-07-24 09:11:39 +10:00
Peter Barker cc190f537f AP_OSD: correct compilation with AP_RRSI_ENABLED false 
Co-authored-by: David Buzz <davidbuzz@gmail.com>
 2024-07-24 09:11:39 +10:00
Peter Barker 1afa801b19 AP_LTM_Telem: correct compilation with AP_RRSI_ENABLED false 
Co-authored-by: David Buzz <davidbuzz@gmail.com>
 2024-07-24 09:11:39 +10:00
Andrew Tridgell a371a3eb89 Copter: fully honour FENCE_OPTION to disable mode changes 
when the user has chosen to disallow mode change during fence breach
it should be fully implemented, without a landing exception.

as requested by Pete, and discussed on dev call
 2024-07-24 08:24:06 +10:00
Andy Piper f8e5c7c1c4 Plane: address minor review comments 2024-07-24 08:24:06 +10:00
Andy Piper 51304848fc Copter: address minor review comments 2024-07-24 08:24:06 +10:00
Andy Piper ccfbfddf7e AC_Fence: address minor review comments 2024-07-24 08:24:06 +10:00
Andy Piper 55075961b2 AP_Mission: address minor review comments 2024-07-24 08:24:06 +10:00
Andrew Tridgell d845af9bc3 Plane: fixed re-enable of fence for FENCE_AUTOENABLE=1 
the is an adjustment to the previous fix which only worked when we had
at least one fence element enabled when we were not flying or disarmed
 2024-07-24 08:24:06 +10:00
Andy Piper 0b6a1f4fe7 autotest: test for circle exclusion fence using AUTOENABLE=2 2024-07-24 08:24:06 +10:00