Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
60,988 Commits 71 Branches 508 Tags 630 MiB
Commit Graph

176 Commits

Author SHA1 Message Date
Pierre Kancir 231e684d96 AP_SerialManager: fix includes place and order 2019-03-26 10:27:54 +11:00
Tom Pittenger add2130e07 AP_SerialManager: unify singleton naming to _singleton and get_singleton() 2019-02-10 19:09:58 -07:00
Siddharth Purohit 3a46fb59e5 AP_SerialManager: add support for fetching serial port by id 2019-01-23 15:57:05 +11:00
Peter Barker cd2182453a AP_SerialManager: remove PX4 code bracketed by defines which will never be set 
Also update a comment
 2019-01-19 18:17:48 +11:00
Peter Barker d3671d9ca3 AP_SerialManager: update description of BAUD parameters 2019-01-19 18:17:48 +11:00
murata 2e1e99eafc AP_SerialManager: Added 256000 baud rate to display 2019-01-09 07:54:04 +11:00
Andrew Tridgell 5f9de3cf15 AP_SerialManager: fixed param docs 
thanks Tom!
 2018-12-29 15:58:22 +11:00
Andrew Tridgell b88c08f5a1 AP_SerialManager: added serial passthru support 
this allows for pass-thru between two serial ports, allowing for the
use of serial config tools
 2018-12-29 15:58:22 +11:00
Andrew Tridgell 28970ed176 AP_SerialManager: added RobotisServo protocol support 2018-12-22 08:13:14 +11:00
Randy Mackay 67be002cca AP_SerialManager: add optical flow to list of protocols 2018-11-28 20:38:58 +09:00
Andrew Tridgell 14cd9f11e8 AP_SerialManager: document Swap option for UARTs 2018-11-20 18:26:42 +11:00
Andrew Tridgell cfb401995f AP_SerialManager: allow override of SERIAL2_PROTOCOL 2018-11-18 21:37:56 +11:00
Andrew Tridgell 20b2d05dfd AP_SerialManager: added docs for HalfDuplex option 2018-11-14 19:05:09 +11:00
Andrew Tridgell ac3b0a98ab AP_SerialManager: added options for each uart 
used to control inversion of uarts
 2018-11-14 19:05:09 +11:00
Andrew Tridgell 75c5fda222 AP_SerialManager: make console do mavlink2 by default 
this is low impact as it doesn't affect radios that may not do mavlink2
 2018-07-18 16:21:02 +10:00
Andrew Tridgell 5929b5fc33 AP_SerialManager: fixed find_baudrate to return mapped baudrate 2018-07-09 15:41:48 +10:00
Peter Barker 37145253d9 AP_SerialManager: remove set_console_baud, factor out find_protocol_instance 2018-07-06 09:36:19 +10:00
Andrew Tridgell 759121f0d0 AP_SerialManager: support uartG 2018-06-29 08:17:38 +10:00
night-ghost 09b5cc382b AP_SerialManager: devo telemetry support (RX705/707) 2018-04-24 10:44:28 +10:00
Andrew Tridgell 71eb9bac03 AP_SerialManager: added ESC telemetry protocol support 2018-04-07 09:10:29 +10:00
Francisco Ferreira 0340188a8f AP_SerialManager: rename Lidar to Rangefinder 2018-02-28 08:04:16 +09:00
Francisco Ferreira 972264637c AP_SerialManager: remove special uLanding protocol type 
Old protocol will be changed to Lidar on library init
 2018-02-28 08:04:16 +09:00
Andrew Tridgell fca0ad4f85 AP_SerialManager: allow hwdef.dat setup of serial5 config 2018-02-07 20:33:45 +11:00
Andrew Tridgell 2513e60e3c AP_SerialManager: use unbuffered writes for volz 2018-02-07 20:33:45 +11:00
Mark Whitehorn 1a167a7d1f AP_SerialManager: disable flow control for sbus1 port 2018-02-07 20:33:45 +11:00
Peter Barker b3f5e807a6 AP_SerialManager: add AP::serialmanager() 2017-12-21 04:35:11 +00:00
Mark Whitehorn f57eab3482 AP_SerialManager: add Volz and Sbus protocols to param metadata 2017-12-14 19:27:02 +00:00
Andrew Tridgell dd489a0797 AP_SerialManager: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Mark Whitehorn 3587d7f253 AP_SerialManager: add SBUS1 serial output support 2017-11-30 10:20:04 +11:00
Guy Tzoler 2442f3fb06 AP_SerialManager: adding Volz Support 
and make AP_SerialManager a singleton
 2017-11-21 14:10:54 +11:00
Lucas De Marchi 04866e9f76 AP_SerialManager: add static create method 2017-09-26 03:01:21 +01:00
Dr.-Ing. Amilcar Do Carmo Lucas 882c4f4052 AP_SerialMananger: add RP-Lidar A2 2017-09-18 08:28:09 +09:00
Andrew Tridgell 29fe432dd7 AP_SerialManager: enable debug console use for other protocols 
this allows SERIAL5_PROTOCOL to be set on FMUv2 and FMUv3 for use by
other protocols
 2017-08-28 17:57:28 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas bf4a505494 AP_SerialMananger: Add missing @RebootRequired: True 2017-05-27 01:55:55 +01:00
karthik.desai 8f7b9323d2 AP_SerialManager: Rename Pozyx Beacon to Beacon 2017-05-16 14:46:05 +09:00
Lucas De Marchi a682bb837a AP_SerialManager: uartA with 460800 baud for aerofc 2017-03-24 12:06:19 +11:00
Luis Rodrigues bf51d5a3c9 AP_SerialManager: add comment that Lidar360 protocol covers TerraRanger 2017-02-03 14:27:54 +09:00
Randy Mackay c4aa37525e SerialManager: add beacon to list of protocols 2016-11-30 17:56:35 +09:00
davidaroyer faa534cf64 AP_SerialManager: Add support for Aerotenna uLanding radar altimeter 2016-11-21 11:07:41 +09:00
murata c808ee2f49 Global: To nullptr from NULL. 
RC_Channel: To nullptr from NULL.

AC_Fence: To nullptr from NULL.

AC_Avoidance: To nullptr from NULL.

AC_PrecLand: To nullptr from NULL.

DataFlash: To nullptr from NULL.

SITL: To nullptr from NULL.

GCS_MAVLink: To nullptr from NULL.

DataFlash: To nullptr from NULL.

AP_Compass: To nullptr from NULL.

Global: To nullptr from NULL.

Global: To nullptr from NULL.
 2016-11-02 16:04:47 -02:00
Peter Barker dee3bdbae9 AP_SerialManager: correct parameter metadata 2016-10-27 09:15:03 -07:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers 
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
 2016-10-24 09:42:01 -02:00
Andrew Tridgell d2e4b73eda Revert "GCS_MAVLink: default to MAVLink2 enabled" 
Reverting change to MAVLink2 by default until SiK radio firmware issue
with ECC is sorted out
 2016-10-21 07:55:02 +11:00
Randy Mackay cc0bfcddcb AP_SerialManager: add Lidar360 to protocol list 
This is used for the proximity sensor
 2016-10-13 20:21:07 +09:00
Andrew Tridgell c64a020384 GCS_MAVLink: default to MAVLink2 enabled 
this changes the default to enable MAVLink2 on USB and the primary
telemetry port. Note that unless signing is enabled it won't send a
MAVLink2 packet until the GCS sends a MAVLink2 packet
 2016-10-12 11:35:50 +11:00
floaledm 50eecf58a4 AP_SerialManager: added SPort passthrough protocol 2016-08-25 10:16:18 +10:00
floaledm 5066a5bc73 AP_SerialManager: syntax and minor lib rework 2016-08-25 10:16:17 +10:00
Andrew Tridgell 78e9ef427e AP_SerialManager: remove special case for console 
and add get_mavlink_protocol() to allow selection of correct mavlink
protocol behaviour
 2016-05-21 15:25:17 +10:00
Andrew Tridgell 826cb0887a AP_SerialManager: changed default for SERIAL4_PROTOCOL to 5 
this makes it a documented protocol number. No functionality change
 2016-05-05 08:08:30 +10:00
Luis Vale Gonçalves 0d9ea7597c Revising ardupilot.com to .org 
Revising ardupilot.com to .org
 2016-04-23 22:49:38 -07:00
Luis Vale Gonçalves a16e9b3606 Revising ardupilot.com to .org 
Revising ardupilot.com to .org
 2016-04-23 22:49:36 -07:00
Andrew Tridgell ef180710db AP_SerialManager: fixed doc strings 2016-04-20 10:03:45 +10:00
Andrew Tridgell 0baf8ee2eb AP_SerialManager: added SERIAL5_* support 2016-04-20 09:39:49 +10:00
mirkix 0366bce9c1 AP_SerialManager: Fix FrSky baudrate comment 2016-04-14 08:46:49 +09:00
Andrew Tridgell 8b6322082e AP_SerialManager: default wifi port to MAVLink at 921600 on Pixracer 2016-04-14 08:05:06 +10:00
Lucas De Marchi d82369b293 AP_SerialManager: replace header guard with pragma once 2016-03-16 18:40:43 +11:00
Lucas De Marchi 3ba00feda4 AP_SerialManager: remove checks for HAL_BOARD_APM2 and HAL_BOARD_APM1 2015-11-04 12:14:13 +11:00
Lucas De Marchi 831d8acca5 Remove use of PROGMEM 
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:

    git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
    git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'

The 2 commands were done so we don't leave behind spurious spaces.

AVR-specific places were not changed.
 2015-10-30 14:35:16 +09:00
Andrew Tridgell 80c85a2c3f AP_SerialManager: added enum for serial lidar 2015-09-08 16:46:52 +10:00
Gustavo Jose de Sousa a4f67ba77d AP_SerialManager: standardize inclusion of libaries headers 
This commit changes the way libraries headers are included in source files:

 - If the header is in the same directory the source belongs to, so the
 notation '#include ""' is used with the path relative to the directory
 containing the source.

 - If the header is outside the directory containing the source, then we use
 the notation '#include <>' with the path relative to libraries folder.

Some of the advantages of such approach:

 - Only one search path for libraries headers.

 - OSs like Windows may have a better lookup time.
 2015-08-11 16:38:23 +10:00
Randy Mackay 0b9c7c2a3b SerialManager: add SToRM32 to protocol param description 2015-06-27 11:18:17 +09:00
Sergey Kirillov 69959a4214 SerialManager: add SToRM32 serial enum and baudrates 2015-05-26 21:05:19 +09:00
Randy Mackay facbfaf31f SerialManager: support for 4th mavlink channel 2015-05-15 15:07:24 +09:00
Jonathan Challinger 6e8008ab69 AP_SerialManager: use protocol_match in find_baudrate 2015-04-08 09:14:31 -07:00
Andrew Tridgell 5284211c96 AP_SerialManager: fixed matching bug in protocol_match() 
thanks to Mike Clement for noticing this
 2015-04-06 15:28:03 -07:00
Mike Clement 89a50b99bb SerialManager: use instance in find_baudrate 2015-04-06 14:47:11 -07:00
Randy Mackay aef16160dc SerialManager: consolidate MAVLink1 and 2 2015-04-01 14:59:17 -07:00
Andrew Tridgell 1f417dce86 AP_SerialManager: added note on external converter requirement for Frsky 
thanks to Luis for the suggestion
 2015-02-24 10:19:42 +11:00
Randy Mackay 0d94d5441f SerialManager: correct protocol comments 
Correct value for 2nd MAVLink protocol
 2015-01-31 12:18:47 +09:00
Matthias Badaire b5b67cf68a SerialManager: Fix SERIALX_PROTOCOL comments 
Fix SERIALX_PROTOCOL to have a proper documentation of the protocol types available
 2015-01-31 12:18:36 +09:00
Andrew Tridgell c05f36d29b AP_SerialManager: make the state structure private 2015-01-29 16:02:24 +11:00
Andrew Tridgell d6ab4722cd AP_SerialManager: moved map_baudrate() into class 
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2015-01-29 15:47:36 +11:00
Andrew Tridgell e28deacc4c AP_SerialManager: simplify interface, returning direct uart 
added find_baudrate() for getting baudrate

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2015-01-29 15:35:42 +11:00
Randy Mackay 0a195671b3 SerialManager: set_console_baud uses first matching protocol 
This ensures we set the baud to the first serial port with the specified
protocol instead of the last.
 2015-01-29 14:05:15 +11:00
Randy Mackay 0fe4436c72 SerialManager: do not init uart for FrSky S-Port 2015-01-29 14:05:11 +11:00
Randy Mackay cc71db1e2f SerialManager: lib to configure UART protocol 2015-01-29 14:05:11 +11:00