Andrew Tridgell
14911eff6c
HAL_PX4: added a (disabled) trick for handling blocking ttyACM0
...
this doesn't work yet, but is worth having for debugging
2013-03-20 11:20:43 +11:00
Randy Mackay
38e81adae0
InertialNav: remove unnecessary "virtual" from function definitions
...
This saves about 30bytes of RAM
2013-03-19 17:51:16 +09:00
Randy Mackay
a17421da27
Copter: scale HIL accels consistently with Plane code
2013-03-19 15:07:15 +09:00
John Stäck
c9576e59f9
Add set command to setup menu (and changed show command), same as for ArduCopter. Not included when building for 1280.
2013-03-19 11:40:25 +09:00
Randy Mackay
b4b9d80c2f
Copter: bug fix to accept HIL accel values correctly
2013-03-19 11:33:58 +09:00
Andrew Tridgell
93fc9c48e5
HAL_PX4: fixed startup bug in fmu_only mode
2013-03-19 07:57:13 +11:00
Andrew Tridgell
4991ea73fe
Rover: fixed CH_2 and CH_4 RC pass through
...
fixes issue #158
2013-03-18 18:06:45 +11:00
John Stäck
46a831fc03
Copter: add parameter "set" and "show" commands to setup menu.
...
Squashed commit of the following:
commit 4243a0bb89de2f850606c623aac6a5b583c333ae
Author: John Stack <stack@spotify.com>
Date: Thu Mar 7 09:28:16 2013 +0100
Undo change to system.pde, not needed.
commit dae2dbbbd6e13621fccc1d0a221aae8d83240417
Author: John Stack <stack@spotify.com>
Date: Wed Mar 6 22:47:50 2013 +0100
Remove leftover bits of old menu setup
commit ccefc8fe0d237364b06a1478348f8552720d7598
Author: John Stack <stack@spotify.com>
Date: Wed Mar 6 22:40:30 2013 +0100
Roll the param menu into setup.
commit c61dad17bf32a3080d8eca2389c6e25f98767545
Author: John Stack <stack@spotify.com>
Date: Wed Mar 6 08:08:42 2013 +0100
Make the param menu a compile-time option, by defining PARAM_MENU
commit 0f35c4e88ec7aba5035b4880e9994e4783da75a9
Author: John Stack <stack@spotify.com>
Date: Wed Mar 6 07:57:22 2013 +0100
Use find(), which works well.
commit 3b81b29597fcee49193330d7b6d3f3aed99a476c
Author: John Stack <stack@spotify.com>
Date: Tue Mar 5 07:57:33 2013 +0100
Whitespace fixes
commit 6b9ccc5fe1de1e40a24eb9ff89006b9bd80e3662
Author: John Stack <stack@spotify.com>
Date: Tue Mar 5 07:28:20 2013 +0100
Add cli menu to change any parameter.
2013-03-18 15:49:41 +09:00
Andrew Tridgell
54cb722f9a
autotest: fixed frame sizes logging
2013-03-18 17:47:51 +11:00
Christopher Hrabia
744f610409
RangeFinder_I2C: fixed bug with interchanged min max values
...
- add usage of mode-filter and min-max constrain, similar to MaxsonarXL
2013-03-18 14:28:31 +09:00
Christopher Hrabia
9760cdf2d7
Compass: corrected space
2013-03-18 14:27:49 +09:00
Andrew Tridgell
952c56e990
Copter: fixed barometer init in HIL sensors mode
2013-03-18 16:20:25 +11:00
Andrew Tridgell
ac06b5e62d
Copter: remove unused function
2013-03-18 16:20:25 +11:00
Randy Mackay
36834e77b5
Copter: remove support for CLI Slider
2013-03-18 14:07:04 +09:00
Randy Mackay
597a4b912a
Copter: fix to allow building HIL_MODE_SENSORS
2013-03-18 13:41:52 +09:00
Andrew Tridgell
ac10e7ea26
Tools: build all the PX4 copter frame types
2013-03-18 15:23:09 +11:00
Andrew Tridgell
3deaf0beee
Tools: added the top level scripts for autotest
2013-03-18 15:16:08 +11:00
Andrew Tridgell
1d836db862
build: added all 7 copter frame types to binary build
2013-03-18 14:44:41 +11:00
Andrew Tridgell
ba8ba36af4
HAL_AVR: fixed build.Examples in autotest
2013-03-18 14:01:21 +11:00
Andrew Tridgell
ac69a531d3
HAL_PX4: workaround problem with APM file on SD card
...
this works around file redirection bug from earlier firmwares
2013-03-18 13:12:17 +11:00
Randy Mackay
d1344e8c39
Copter: remove #define for CROSSTRACK_GAIN
...
Note: the cross track is still calculated inside the inertial nav based
loiter and wp controls but it's no longer requires a tunable parameter
2013-03-17 16:56:18 +09:00
Randy Mackay
1b6fcad90a
Copter: remove tilt compensation parameter
...
Note: this idea of feed forward tilt compensation is being incorporated
into the inertial nav based loiter and wp controllers but does not
require a separate tunable parameter
2013-03-17 16:53:32 +09:00
Randy Mackay
61e29173e3
Copter: remove unused crosstrack variables and parameters
...
Cross track is still calculated internally to the wpnav controller so we
should move this to a library and still report it to the ground station
2013-03-17 16:46:31 +09:00
Randy Mackay
a1295c042b
Copter: fix init of wp_verify_byte so wp alt is always required
2013-03-17 16:37:30 +09:00
Andrew Tridgell
551950c573
GPS_UBLOX: fixed auto-config of baudrate
...
this fixes the setting of the baudrate on a uBlox that is configured
for 9600. It fixes the NMEA message to have a \r\n, plus sends the
NAV_SOL rate config before the NMEA baudrate config message.
This fixes issue #159
2013-03-17 17:52:48 +11:00
Randy Mackay
fdcb78ccf7
Copter: leonard's smoother alt-hold transition
...
Target altitude when entering alt-hold is based on a projection from
current alt and climb rate
2013-03-17 13:24:49 +09:00
Randy Mackay
37040adfaa
Copter: bug fix for auto missions over 320m
...
get_throttle_althold_with_slew's target_alt parameter defined as int16_t
(instead of int32_t) meaning missions with altitudes >320m could wrap
around and become negative.
2013-03-17 11:14:35 +09:00
Randy Mackay
c9571ad543
InertialNav: remove 3sec limit on position est after losing GPS
2013-03-16 18:15:59 +09:00
Andrew Tridgell
6a1aad30f1
HAL_PX4: auto-create APM directory on SD card
2013-03-16 19:47:09 +11:00
Andrew Tridgell
bb14672dab
Rover: fixed PX4 MPU6000 driver for rover
2013-03-16 19:47:09 +11:00
Randy Mackay
150046f2b8
Copter: GPS Failsafe implemented
...
Switches to LAND mode 5 seconds after losing GPS if you're in a flight
mode that requires a GPS
2013-03-16 17:27:46 +09:00
Randy Mackay
f9539384a1
Copter: rename failsafe to failsafe_radio
...
Makes way for separation of failsafes for throttle, gps and gcs
2013-03-16 17:14:21 +09:00
Randy Mackay
f263e81ed7
Copter: remove unused GPS and baro filters
...
Saves 24bytes of RAM
Removing the baro filter leads to noisier Baro Alt appearing in the log
so we should make the inertial nav altitude appear in the CTUN message
2013-03-16 00:20:15 +09:00
Andrew Tridgell
232bdca4e2
autotest: improved skid steering test scripts
2013-03-15 11:05:03 +11:00
Andrew Tridgell
0dde0b3551
Rover: initial implementation of skid steering for APMrover2
...
this adds SKID_STEER_IN and SKID_STEER_OUT parameters for controlling
skid skeering control and output
2013-03-15 11:04:33 +11:00
Andrew Tridgell
8d8e30156f
autotest: added skid steering version of rover sim start script
2013-03-15 09:52:57 +11:00
Andrew Tridgell
6ea2130342
autotest: added skid steering support to rover simulator
...
Very rough initial implementation. Needs to be tweaked for more
realistic behaviour later.
thanks to Greg Brill for pointers on this.
2013-03-15 09:52:32 +11:00
Andrew Tridgell
5ddbad6ccb
Rover: remove scaling of voltage pin
2013-03-15 08:40:32 +11:00
Andrew Tridgell
7681f3b639
AP_HAL: update AnalogIn example to show voltages not raw values
2013-03-15 08:39:22 +11:00
Andrew Tridgell
af141c2487
Rover: implement RSSI_PIN
...
route RSSI value from receiver to MAVLink
2013-03-15 08:08:35 +11:00
Andrew Tridgell
c1c967f3bf
DataFlash: fixed test sketch build and run
2013-03-15 07:30:40 +11:00
Andrew Tridgell
a7541e9ad3
DataFlash: report log number when starting a new log
...
helps with test sketch
2013-03-15 07:30:23 +11:00
Andrew Tridgell
cf62619108
build: record git version in firmware build
2013-03-14 12:58:33 +11:00
Andrew Tridgell
d9be58fd2c
autotest: add 10 mins to timeout
...
this copes with build_binaries.sh
2013-03-13 08:23:41 +11:00
Andrew Tridgell
36ff950b12
Plane: fixed MAVLink target IDs in fence point message
...
thanks to Kevin Hester for finding this
2013-03-12 15:04:48 +11:00
Andrew Tridgell
8b87d3643b
autotest: fixed mavlink paths
2013-03-12 13:15:41 +11:00
Andrew Tridgell
d06668f1cd
build: added support for "make apm1-1280"
2013-03-12 12:45:49 +11:00
Andrew Tridgell
5762a13223
build: add 1280 build for rover and plane
2013-03-12 12:45:21 +11:00
Andrew Tridgell
5db1dbd8d1
autotest: fixed python path for mavtemplate
2013-03-12 11:49:43 +11:00
Andrew Tridgell
ba8d830754
DataFlash: start to fix example build
2013-03-11 13:02:08 +11:00