Commit Graph

61 Commits

Author SHA1 Message Date
Adam M Rivera 8128fb2d5f Merge branch 'master' of https://code.google.com/p/ardupilot-mega into auto-approach
Conflicts:
	ArduCopter/Parameters.h
2012-04-16 10:23:01 -05:00
Adam M Rivera 2d096c401f Parameters: Changed rtl_approach_alt to float to support more granular altitudes 2012-04-16 10:06:29 -05:00
Andrew Tridgell 5a9ad6ddbb AHRS: enable AHRS_ group in ArduCopter 2012-04-16 20:55:14 +10:00
Adam M Rivera f5e0b002ba Parameters: Added new APPROACH_ALT params (g.rtl_approach_alt) which stored the users desired target altitude after RTL is complete. 2012-04-15 16:51:41 -05:00
rmackay9 d1a5d1f94c ArduCopter - LEDS - two new parameters to support COPTER_LEDS.
Code by Robert Lefebvre.
2012-04-12 22:55:28 +09:00
rmackay9 023378a214 ArduCopter - Parameters.h - changed initialisation order to remove compiler warning (have not changed enum values so shouldn't require eeprom format id update) 2012-04-09 17:37:06 +09:00
rmackay9 929e933b69 ArduCopter - increased firmware version to 118. Removed nearly all heli parameters as these are all created by the AP_MotorHeli class now.
Note: we cannot move the heli_servos to the AP_MotorHeli class yet because of a small issue in the parameters class.
2012-04-04 22:55:07 +09:00
Robert Lefebvre a7e0fc7774 Added support for TradHeli H1 swashplate type. Added new param heli_h1_swash_enabled.
Signed-off-by: Robert Lefebvre <robert.lefebvre@gmail.com>
2012-03-03 08:14:14 -05:00
Andrew Tridgell bfca928211 ACM: added RC_SPEED MAVLink parameter
this will set the speed for APM_RC.SetFastOutputChannels()
2012-03-02 17:57:08 +11:00
Andrew Tridgell 1e2b57410c ACM: fixed Parameters.h to avoid duplicate keys
unfortunately everyone needs to reload
2012-03-02 15:48:28 +11:00
Jason Short 6ca8aeecf3 added stab_d gain scheduling 2012-02-28 20:16:40 -08:00
Jason Short 83ad721b73 added Axis_Lock params 2012-02-18 21:13:06 -08:00
Randy Mackay b55db247ca TradHeli - fixed small parameter bug affecting helis. The servo parameters were declared as GSCALAR instead of GGROUP in Parameters.pde.
also renamed heli parameters from _coll_ to the more descriptive _collective_
2012-02-18 20:57:51 +09:00
Andrew Tridgell 6b357fc66b AP_Param: fixed saving of sensor calibration
this fixes the saving of the accel and gyro calibration to EEPROM,
which was initially broken by the AP_Param conversion
2012-02-18 10:51:57 +11:00
Jason Short bb4c02fbff Added acro_p to the params 2012-02-15 11:29:25 -08:00
Jason Short c916a87a78 added RTL_land_enabled
added auto_pilot slew rate
2012-02-15 09:10:14 -08:00
Jason Short eee43608de Added new params for CH6 Tuning
moved enums to give more room for additional PIDs for Loiter
added new Acro_P gain
added auto_land_enabled option
added pi_loiter_lon and pi_loiter_lat for separate tuning of loiter
2012-02-15 09:10:14 -08:00
Andrew Tridgell 55d0ad3255 update main parameter code for AP_Param in ACM 2012-02-13 16:22:52 +11:00
Jason Short f2afa39bbd Cosmetic 2012-01-30 21:13:03 -08:00
Randy Mackay 1cbbe7bc7d Optflow - minor fix to D term defaulting 2012-01-29 21:06:41 +09:00
Jason Short 0213f4dd88 2.2B6 - Please verify Heli still functions properly.
Added AC_PID lib
Updated landing code
bug fixes
2012-01-28 22:00:05 -08:00
Randy Mackay 2f84b54bbb OpticalFlow - replaced PI controller with PID controller.
Modified optical flow hold to use aggregated position instead of speed.
2012-01-25 21:55:14 +09:00
Jason Short 7616c3b5a1 Converted distance gains to CM
added loiter_d for rate control, equal to old Nav_P gain
2012-01-21 22:13:57 -08:00
Jason Short 84937b4f69 Added Auto_land_timeout to params 2012-01-20 22:52:30 -08:00
Jason Short 99b71434da Updated Firmware version 2012-01-20 22:52:30 -08:00
Michael Oborne 3b93418d67 AC sync battery code with arduplane 2012-01-21 06:29:09 +08:00
Doug Weibel 2ea9db84e0 Update battery monitoring code for ArduCopter
Fixes compatibility for APM2.  Also a significant update to the battery monitoring code:  We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos.  These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere).  Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs.  The CLI battery and current monitoring tests were consolidated into 1 test.
changed
2012-01-15 17:10:02 -07:00
Randy Mackay 7b9701fdd5 ArduCopter - added ROLL_PITCH_STABLE_OF (i.e. Stabilised Roll/Pitch + adjustments based on optical flow)
Removed optical flow from regular loiter for now until it's tested.
2012-01-09 13:53:54 +09:00
Jason Short 62ca68cdbb Reverted to Crosstrack like in Arduplane, requires Degrees * 100 2011-12-30 23:48:04 -08:00
Jason Short 8a1b9df325 Added Stabilize_D parameter 2011-12-29 23:02:02 -08:00
Randy Mackay 85167be181 TradHeli - modified the default collective min/max values to restrict movement to about half the full range. 2011-12-26 16:59:01 +09:00
Jason Short fa908795d9 renamed super simple 2011-12-15 20:51:41 -08:00
Jason Short 6a55fe18f6 added altitude to circle mission 2011-12-15 20:51:40 -08:00
Doug Weibel 2687f1c77d Changes to logging file system to avoid problems with 0 and 1 page logs 2011-12-13 20:09:07 -07:00
Jason Short 6bac318def Added param option for Simple mode reset 2011-12-12 17:47:45 -08:00
Randy Mackay 62a7b19600 Arducopter, RangeFinder - added SONAR_TYPE parameter and properly support the XL (default), LV and long distance XL (aka XLL) sonar types 2011-12-11 16:40:59 +09:00
Jason Short a226234cee allow CH7 to be set via params 2011-11-26 16:39:28 -08:00
Jason Short c6990088f9 Made loiter rad smaller in storage 2011-11-20 00:22:53 -08:00
Jason Short 13e2ecf096 Upped version
added new logging params
added crosstrack gain
re-ordered param inits
2011-11-19 14:00:23 -08:00
Jason Short 870b4f3875 Mission Scripting updates 2011-11-16 00:22:23 -08:00
Randy Mackay 2acc1fbd9d TradHeli - added two parameters to improve heli control.
heli_phase_angle allows pilot roll/pitch command to be translated into mixed roll and pitch.
heli_coll_yaw_effect mixes some collective into the yaw so tail can counter act collective movements more easily.
2011-11-13 22:20:57 +09:00
Jason Short c1313ae6a9 Fixed scaling issue with Circle mode 2011-11-13 00:24:25 -08:00
Jason Short 3b825fb8c1 Merge branch 'master' of https://code.google.com/p/ardupilot-mega
Conflicts:
	Tools/autotest/autotest.py
2011-11-12 21:53:08 -08:00
Michael Oborne 9aeda9f702 fix loiter radius 2011-11-13 08:24:56 +08:00
Jason Short 238c4cfab2 Fixed type error in params 2011-11-12 15:15:33 -08:00
unknown 4fcf11cf6e TradHeli - new parameter HSV_MAN to allow better set-up from APMissionPlanner. Also changed swash movement to use radio_out which fixes some setup bugs 2011-11-12 23:23:07 +09:00
Jason Short 80c7e135d5 renamed some command variables to align with Arduplane
reworked the arming code and moved the DCM gains out.
updated climb_rate to include sonar data.
2011-11-04 21:41:51 -07:00
Jason Short 5ed1c2ab9e 50 rev
Work in progress, revved the EEPROM
2011-10-27 12:42:28 -07:00
Jason Short 84310cf069 Added Acro Params
Allows user's to fly separate PI loops settings for Acro
2011-10-27 11:52:00 -07:00
Jason Short 82bbc68198 typoo in params for camera roll gain. fixed. 2011-10-15 18:34:23 -07:00