Randy Mackay
653a5036ae
Copter: #define for initial altitude jump during take-off
...
Developers can add a line like to APM_Config.h to reduce the initial
jump when taking off in Loiter or AltHold flightmodes:
#define ALT_HOLD_TAKEOFF_JUMP 0
2013-09-12 22:31:42 +09:00
Randy Mackay
072b231c3f
Copter: integrate slow start feature
2013-09-12 22:29:53 +09:00
Randy Mackay
36bbed8fdd
Copter: removed calls to set motor's max throttle
2013-09-12 22:28:38 +09:00
Randy Mackay
62cb5c172b
Copter Motors: add slow start feature
...
Combined armed, frame orientation and slow_start into flags bitmask
Removed ability to set max throttle because it was never used
Re-ordered class variables
2013-09-12 22:27:44 +09:00
Randy Mackay
ac98644405
Sprayer: minor change to flags type
2013-09-12 22:24:14 +09:00
Andrew Tridgell
1f84399704
autotest: small adjustment to rover parameters
2013-09-12 20:43:14 +10:00
Andrew Tridgell
bc3249fada
SITL: fixed Vcc voltage
2013-09-12 16:34:38 +10:00
Andrew Tridgell
3a3cecf5ff
PX4: support getting servorail voltage from ORB
2013-09-12 16:28:06 +10:00
Andrew Tridgell
8010d7fd78
Plane: update battery pin docs
2013-09-12 13:43:22 +10:00
Andrew Tridgell
adc923b989
Copter: update battery pin docs
2013-09-12 13:43:15 +10:00
Andrew Tridgell
d9fe0552f0
Copter: allow Vcc checks on Pixhawk
2013-09-12 13:43:06 +10:00
Andrew Tridgell
5c639b8b9f
Rover: update battery pin docs
2013-09-12 13:42:48 +10:00
Andrew Tridgell
457ca0b57d
AP_ADC_AnalogSource: fixed APM1 build
2013-09-12 13:28:11 +10:00
Andrew Tridgell
fe5a4ab710
Plane: fixed Vcc
2013-09-12 13:26:27 +10:00
Andrew Tridgell
7c62736e59
Copter: fixed Vcc
2013-09-12 13:26:19 +10:00
Andrew Tridgell
6ab9b0b91b
Rover: fixed Vcc
2013-09-12 13:26:12 +10:00
Andrew Tridgell
fb56feb6b2
HAL_PX4: support all analog input pins, with scaling
...
this allows voltage/current/Vcc sensing on FMUv2
2013-09-12 13:26:00 +10:00
Andrew Tridgell
a80d3344f5
AP_HAL_AVR: support voltage_latest()
2013-09-12 13:25:17 +10:00
Andrew Tridgell
a587b1140a
AP_HAL: added voltage_latest() interface
...
this will be used for reading the 5V rail
2013-09-12 13:23:04 +10:00
Andrew Tridgell
4f33e4e114
autotest: fixed handling for wiki and xml generation
2013-09-12 10:01:30 +10:00
Andrew Tridgell
0c8d56632e
Plane: fixed SR0 and SR3 autodocs
2013-09-12 09:53:24 +10:00
Andrew Tridgell
4545445850
Copter: fixed SR0 and SR3 autodocs
2013-09-12 09:53:13 +10:00
Andrew Tridgell
bfd61fec15
param_metadata: support .pde files for parameter autodocs
2013-09-12 09:51:59 +10:00
Andrew Tridgell
d20644e664
Rover: added SR0 and SR3 stream rates to auto docs
2013-09-12 09:51:36 +10:00
Andrew Tridgell
3d6e76a050
Rover: changed default L1 period to 11
2013-09-12 07:48:57 +10:00
Andrew Tridgell
b7e54bd463
AP_Airspeed: reduce speed of autocal
...
it was responding to noise too rapidly
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2013-09-12 07:48:57 +10:00
Andrew Tridgell
2171f2a80b
AP_SteerController: move scaler onto integrator input
...
this should make integrator scale with speed
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2013-09-12 07:48:57 +10:00
Randy Mackay
a68966e077
Copter: integrate sprayer pump test
2013-09-11 17:05:25 +09:00
Randy Mackay
5e7a6b3b98
Sprayer: add pump min rate and test
...
If pump is enabled while copter is disarmed it will spray as if
travelling at 1m/s
2013-09-11 17:04:58 +09:00
Randy Mackay
152f5da880
Copter: integrate AP_Notify batt and radio failsafes
2013-09-11 14:36:38 +09:00
Randy Mackay
b3c636dfa3
AP_Notify: add radio and battery failsafe
...
radio and battery failsafe are slow flashing yellow
pre-arm check failure changed to double flashing yellow
2013-09-11 14:36:05 +09:00
Randy Mackay
8f16dbf95e
PX4: start rgbled driver
2013-09-11 13:15:35 +09:00
Randy Mackay
3abdf14e51
Build: sort .gitignore alphabetically, add .bin
2013-09-11 13:15:19 +09:00
Randy Mackay
9095c6ab30
Copter: update Release notes for AC3.1-rc1 again
2013-09-11 09:51:47 +09:00
Randy Mackay
8e0cacad39
Copter: disable low battery events when usb connected
2013-09-09 21:27:05 +09:00
Kevin Hester
240a9ccaf0
AC: if vehicle is !flying show hb state as MAV_STATE_STANDBY
...
This helps GCSes determine the appropriate UI for the current vehicle
mode.
2013-09-09 20:51:54 +09:00
Randy Mackay
43c4ba304d
Copter: update Release Notes for AC3.1-rc1
2013-09-09 20:04:30 +09:00
Andrew Tridgell
341dca4dfe
AP_L1_Control: added set_default_period()
...
used by the rover code
2013-09-09 19:55:53 +10:00
Andrew Tridgell
0c37bcbb10
autotest: don't show console in autotest
2013-09-09 19:55:38 +10:00
Andrew Tridgell
35519b9298
autotest: update rover default parms
2013-09-09 19:55:25 +10:00
Andrew Tridgell
983ca71796
Rover: moved override of defaults to load_parameters()
2013-09-09 19:55:11 +10:00
Andrew Tridgell
fc1228eb48
Rover: set a default filter frequency of 5Hz
...
this should help rovers on rough surfaces
2013-09-09 19:19:11 +10:00
Andrew Tridgell
7b3a674d66
AP_InertialSensor: added set_default_filter() method
2013-09-09 19:18:52 +10:00
Andrew Tridgell
ad9a605603
autotest: removed APM1-1280 from rover build
...
it no longet fits with the new L1 controller
2013-09-09 19:14:39 +10:00
Andrew Tridgell
229841052a
AP_Compass_PX4: removed MAGIOCSSAMPLERATE call
2013-09-09 18:04:41 +10:00
Andrew Tridgell
d000cd2320
Rover: switched to new steering controller
...
this uses a steering rate controller, based upon the planes roll
controller
2013-09-09 18:04:41 +10:00
Andrew Tridgell
c044385fff
AP_AHRS: added groundspeed() method
...
this gives ground speed in m/s from GPS
2013-09-09 18:04:41 +10:00
Andrew Tridgell
0918393fed
APM_Control: fixed some documentation typos
2013-09-09 18:04:40 +10:00
Andrew Tridgell
7413c15959
APM_Control: added a ground vehicle steering controller
...
this will be used both for the rover code, and for ground steering of
a plane on takeoff
2013-09-09 18:04:40 +10:00
Andrew Tridgell
887942471e
Rover: use Y accel computed from gyro and velocity
...
this should be less susceptible to noise and attitude errors,
hopefully leading to better learning
2013-09-09 18:04:40 +10:00
