Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
43,658 Commits 70 Branches 507 Tags 662 MiB
Commit Graph

616 Commits

Author SHA1 Message Date
Andrew Tridgell c83e2d7c0e AP_NavEKF2: fixed loss of GPS fusion 
we must not do a storedGPS.recall unless we will be using the data,
otherwise we will lose GPS samples and risk stopping GPS fusion
 2020-04-24 09:43:23 +10:00
Andrew Tridgell 6c3889b04f AP_NavEKF2: fixed typos 2020-04-24 09:43:23 +10:00
Andrew Tridgell 3edbe81b1e AP_NavEKF2: removed 2nd set of imuSampleTime_ms 2020-04-24 09:43:23 +10:00
Paul Riseborough 6952d83f00 AP_NavEKF2: Fix casting build error 2020-04-24 09:43:23 +10:00
Paul Riseborough 0d965d2a1c AP_NavEKF2: Fix timer wrapping bugs 
Also replaces tab characters
 2020-04-24 09:43:23 +10:00
Paul Riseborough de0040ad69 AP_NavEKF2: Enable use of EKF-GSF yaw estimate 
Enables the yaw to be reset in flight to a value estimated from a specialised yaw estimator. This allows faster recovery if taking off with a bad magnetometer and also allows yaw alignment and GPS use to commence in-air when operating without any yaw sensing.

AP_NavEKF2: Add missing accesor functions for default airspeed
 2020-04-24 09:43:23 +10:00
Randy Mackay 35dcb0d752 AP_NavEKF2: CorrectExtNavForSensorOffset made const 2020-04-21 10:21:23 +10:00
Randy Mackay 85704e4989 AP_NavEKF2: CorrectGPSForAntennaOffset made const 
also reduce scope of call to slightly reduce CPU load
 2020-04-21 10:21:23 +10:00
Peter Barker f1fc05d357 AP_NavEKF2: rename APMrover2 to Rover 2020-04-14 09:50:34 +09:00
Randy Mackay 8749f30c64 AP_NavEKF2: external nav pos offsets from AP_VisualOdom library 2020-04-14 10:28:03 +10:00
Randy Mackay fb7e68c53a AP_NavEKF2: writeExtNavData reset handles system time wrap 2020-04-14 10:28:03 +10:00
Randy Mackay 9f81da1bf9 AP_NavEKF2: minor comment fix 2020-04-13 14:39:53 +09:00
Andrew Tridgell c9755cf9e6 AP_NavEKF2: make mag variance reporting consistent 
logged scaled variance should match the value used in MAVLink
EKF_STATUS_REPORT
 2020-04-06 17:30:29 +10:00
Peter Barker 903d81c263 AP_NavEKF2: use compass reference rather than repeatedly asking AHRS for it 2020-03-13 08:26:18 +11:00
Andrew Tridgell 9030590a88 AP_NavEKF2: fixed use of antenna position when switching GPS primary 
when GPS primary switches we were using a position which had not been
corrected for antenna offset. This was used for calculating the reset
for sensor change.

This fixes that (trivial fix) and also fixes a similar issue on
position reset
 2020-02-19 18:12:54 +11:00
Siddharth Purohit 4cca1c307c AP_NavEKF2: Primary compass is always at serial number 0 2020-02-19 13:59:53 +09:00
Peter Hall e0eeb4f863 AP_NavEKF2: add initalized flag and change to uint32_t 2020-02-19 06:45:07 +11:00
chobits a54f24c8c0 AP_NavEKF2: switch to optflow if gps is jammed 2020-02-04 10:13:57 +09:00
Peter Barker da3d3cc21b AP_NavEKF: stop taking ahrs in constructor 2020-01-21 11:53:18 +11:00
Peter Hall 2970334c0d AP_NavEKF2: get_time_flying in vehicle 2020-01-14 22:34:37 -07:00
Peter Barker 524647d221 AP_NavEKF2: use instance number when logging rather than multiple message IDs 2019-12-17 12:22:07 +11:00
Peter Barker 060c851709 AP_NavEKF2: make send_status_report const 2019-12-11 07:54:41 +09:00
Peter Barker 369292f7f3 AP_NavEKF2: stop relying on the presence of a RangeFinder 2019-12-11 08:09:01 +11:00
Peter Barker 239df941e5 AP_NavEKF2: use instance # when logging EKF core timings 2019-12-06 12:52:03 +09:00
Andrew Tridgell fce4d6952f AP_NavEKF2: don't use WMM tables unless we have a compass scale factor set 2019-12-03 20:48:23 +11:00
Mark Whitehorn 5f6b3a1f5b AP_NavEKF2: clean up init failure handling 
only attempt to allocate memory once
 2019-11-26 11:59:10 +11:00
Peter Barker 99689f65f8 AP_NavEKF2: adjust for renaming of RangeFinder files 2019-11-12 07:14:37 +08:00
Peter Barker 9735684184 AP_NavEKF2: use enum-class for RangeFinder Status 2019-11-09 08:01:53 +11:00
Mark Whitehorn 23ee9eef5f AP_NavEKF2: fail prearm on any core setup failure 2019-11-05 11:23:54 +11:00
Mark Whitehorn 489ae83604 AP_NavEKF2: handle core setup failures 2019-11-05 11:23:54 +11:00
Mark Whitehorn 7c6630e216 AP_NavEKF2: EKF2 prefix for prearm failures and camelCase 2019-11-05 11:23:54 +11:00
Mark Whitehorn 95ea6ad807 AP_NavEKF2: provide reasons for init failures 2019-11-05 11:23:54 +11:00
Randy Mackay cc5facf6d2 AP_NavEKF2: initialise pre-arm failure message 2019-10-31 09:51:27 +08:00
Mark Whitehorn 6e73feca5c AP_NavEKF2: add prearm failure message for null core pointer 2019-10-29 11:59:29 +08:00
Randy Mackay e32a8556b2 AP_NavEKF2: suppress ekf fail-to-set-origin if core disabled 2019-10-22 07:15:48 +08:00
Randy Mackay e2d3afaaa7 AP_NavEKF2: reduce EK2_HRT_FILT max to 30 2019-10-18 11:15:25 +09:00
Paul Riseborough c26c6fd078 AP_NavEKF2: Add missing vertical position derivative calculation 
Use a third order order complementary filter to estimate the rate of change of vertical position output.
 2019-10-18 11:15:25 +09:00
Andrew Tridgell cbe34320b5 AP_NavEKF2: fixed build 
broken by recent common variable change
 2019-10-01 17:35:26 +10:00
Andrew Tridgell f7e138bddd AP_NavEKF2: use parent class for intermediate static variables 
this makes the code faster as well as using less memory when both EK2
and EK3 are enabled
 2019-10-01 15:39:03 +10:00
Andrew Tridgell 8dd2119b14 AP_NavEKF2: make it easy to do EK2 timing tests 
for future benchmarking
 2019-09-28 08:57:26 +10:00
Andrew Tridgell 163efd0df5 AP_NavEKF2: change optimisation from -O3 to -O2 2019-09-28 08:57:26 +10:00
Peter Barker 952d4d2cbc AP_NavEKF2: initialise Kfusion stack variable to fix compilation 
This fixes the compilation, as previous patches have done.
 2019-09-25 12:54:55 +10:00
Andrew Tridgell d40d812ea4 AP_NavEKF2: fixed build with g++ 9.1 
this is a false positive, but the cost of clearing this array is low,
and it saves a much more complex fix
 2019-09-24 14:59:17 +10:00
Andrew Tridgell 9226899c6f AP_NavEKF2: added comment (review request) 2019-09-24 12:51:54 +10:00
Andrew Tridgell 255981c60c AP_NavEKF2: moved some of the intermediate vars to the stack 
this keeps stack frames below 1k, while giving faster access to the
variables and saving more memory
 2019-09-24 12:51:54 +10:00
Andrew Tridgell 96c6544997 AP_NavEKF3: moved intermediate variables to common memory 
this moves intermediate variables from being per-core to being common
between cores. This saves memory on systems with more than one core by
avoiding allocating this memory on every core.

This is an alternative to #11717 which moves memory onto the stack. It
doesn't save as much memory as #11717, but avoids creating large stack
frames
 2019-09-24 12:51:54 +10:00
Andrew Tridgell 0041874826 AP_NavEKF2: moved intermediate variables to common memory 
this moves intermediate variables from being per-core to being common
between cores. This saves memory on systems with more than one core by
avoiding allocating this memory on every core.

This is an alternative to #11717 which moves memory onto the stack. It
doesn't save as much memory as #11717, but avoids creating large stack
frames
 2019-09-24 12:51:54 +10:00
Andrew Tridgell 1d47f9186e AP_NavEKF2: fixed use of old irqsave() API 2019-09-21 15:36:47 +10:00
Peter Barker 3619856fc9 AP_NavEKF2: correct return of empty prearm string 2019-09-19 08:47:47 +09:00
Randy Mackay 94a52b3525 EKF2: RNG_USE_HGT param only used when ALT_SOURCE = rangefinder 2019-09-10 18:44:52 +10:00
Michael du Breuil a4d10b2e86 AP_NavEKF2: Allow the GPS to be responsible for logging 2019-09-10 09:09:17 +10:00
Peter Barker c8fac758ee AP_NavEKF2: use timing logging from AP_NavEKF 2019-09-03 09:28:37 +10:00
Andrew Tridgell 414d3eb670 AP_NavEKF2: don't fuse GPS when EK2_GPS_TYPE=3 
when using a vision position system, the user may have vision derived
GPS data coming in using GPS_INPUT msgs. We should not fuse these when
EK2_GPS_TYPE=3 as we end up fusing both vision data and GPS data,
which does not work with the current EK2 code

This change makes it possible to run EK2 and EK3 in parallel in a
Vicon, wityh EK2 using VISION_POSITION_ESTIMATE data and EK3 using
GPS_INPUT (with yaw) data.
 2019-08-26 12:27:31 +10:00
hoangthien94 fc9ff2b09a AP_NavEKF2: add method to check if ext nav is used for yaw 2019-08-03 08:44:11 +09:00
Andrew Tridgell 098701ec79 AP_NavEKF2: fixed baro innovation gate when on ground with AIDING_NONE 
when on the ground without a position source we would disable the
innovation gate for the barometer. This meant that a single (or small
number of) really bad baro readings would be fused into the EKF,
causing it to destabilise

Fixes #11903
 2019-07-30 08:23:21 +10:00
Andrew Tridgell e7163afe06 AP_NavEKF2: review fixes 
thanks Paul!
 2019-07-29 10:08:22 +10:00
Andrew Tridgell c57b25b4c9 AP_NavEKF2: ensure that EKF origin stays in sync on all cores 
this prevents the EKF origin on different cores from being initialised
to different values. A common value is stored in the frontend and used
by a core if it doesn't have an origin
 2019-07-29 10:08:22 +10:00
Andrew Tridgell a01faa2f00 AP_NavEKF2: use origin lat for earth rates 
home may not yet be set when this code is run, so using home may be
invalid
 2019-07-29 10:08:22 +10:00
Andrew Tridgell 742ae0b750 AP_NavEKF2: set origin on all cores 
when EKF origin is set, make sure it is set on all cores
 2019-07-29 10:08:22 +10:00
Andrew Tridgell 5db41147ed AP_NavEKF2: restrict setting of EKF origin 
only allow EKF origin to be set if EKx_GPS_TYPE is set to 3, which is
used for indoor operation
 2019-07-29 10:08:22 +10:00
Siddharth Purohit 1527a5b97c AP_NavEKF2: do logging for 3rd EKF core 2019-07-23 12:34:38 +10:00
Andrew Tridgell 2427440e13 AP_NavEKF2: origin handling fixes from Francisco 2019-07-11 06:40:55 +10:00
Andrew Tridgell e8d9a1fae9 AP_NavEKF2: don't allow height datum reset when not on ground 2019-07-07 19:20:32 +10:00
Andrew Tridgell f5fd38aef2 AP_NavEKF2: set terrainState to zero on height datum reset 2019-07-07 19:20:32 +10:00
Andrew Tridgell 9372073f63 AP_NavEKF2: continuously update gpsGoodToAlign 
use it to determine how to handle a height datum reset
 2019-07-07 19:20:32 +10:00
Andrew Tridgell 20ebb2500b AP_NavEKF2: ensure that both AMSL and relative alt are correct after a reset 
this forces the EKF origin to the GPS alt on a height datum reset if
we have GPS lock. If we don't do this then the reported AMSL alt will
drift over time away from the GPS alt when we reset while on the
ground
 2019-07-07 19:20:32 +10:00
Andrew Tridgell ddef40fa3d AP_NavEKF2: don't use disabled gyros in opticalflow takeoff detection 2019-07-07 19:03:01 +10:00
Andrew Tridgell 1c4c5a6850 AP_NavEKF2: learn gyro biases for inactive gyros 
this allows us to learn the gyro biases each lane would need if it had
to switch to another gyro due to a sensor failure. This prevents a
sudden change in gyro bias on IMU failure
 2019-07-07 19:03:01 +10:00
Peter Barker 6a0a466f42 AP_NavEKF2: factor out and logging functions, reuse for 2nd core 2019-07-06 19:05:51 +10:00
Peter Barker 5175d23cc1 AP_NavEKF2: move logging in from AP_Logger 2019-07-06 19:05:51 +10:00
Andrew Tridgell 567c902e75 AP_NavEKF2: force first EKF lane when disarmed 
this ensures we consistently fly with EKF lane1 if it is healthy at
the point we arm. Otherwise the choice of lane will be a lottery.

This is important as many systems have quite different filtering and
vibration characteristics on their different IMUs. We by default
enable fast sampling only on the first IMU for example, which means
the 2nd and 3rd IMUs are more vulnerable to high freq causing
aliasing.
 2019-07-04 06:48:23 +10:00
Peter Barker 82df167ad4 AP_NavEKF2: use beacon singleton 2019-07-01 07:20:58 +09:00
Michael du Breuil f04e47fc17 AP_NavEKF2: Reduce scope of AP_Baro.h 2019-06-27 14:56:21 +10:00
Michael du Breuil 892b687c09 AP_NavEKF2: Fix AP_GPS.h include 2019-06-18 10:02:05 +10:00
Andrew Tridgell 3073c4da7a AP_NavEKF2: added checkLaneSwitch() 
this allows the vehicle code to ask the EKF to change lanes if it is
about to do an EKF failsafe
 2019-06-12 09:52:20 +10:00
Andrew Tridgell df4fc0fff0 AP_NavEKF2: default EK2_MAG_EF_LIM to 50 
this was supposed to be part of the original PR (agreed with Paul to
enable by default)
 2019-06-08 20:24:58 +10:00
Peter Barker 11f31c2851 AP_NavEKF2: take EAS2TAS from AHRS rather than airspeed 2019-06-06 12:44:36 +10:00
Andrew Tridgell e9ed3540f1 AP_NavEKF2: constrain field by table after fusion 
this should make for faster convergence
 2019-06-03 12:21:29 +10:00
Andrew Tridgell 3835d2613e AP_NavEKF2: added EK2_MAG_EF_LIM parameter 
this sets a limit on the difference between the earth field from the
WMM tables and the learned earth field inside the EKF. Setting it to
zero disables the feature. A positive value sets the limit in mGauss.
 2019-06-03 12:21:29 +10:00
Randy Mackay e19d638c0f AP_NavEKF2: support higher optical flow updates rates 2019-05-11 16:23:57 +09:00
Andrew Tridgell cc62998d40 AP_NavEKF2: fixed bug in EKF lane selection 
this fixes an issue in selecting the best lane to change to when we
have 3 or more EKF cores. The bug is that if the current lane is
unhealthy it would always choose the last healthy lane instead of
choosing the lane with the lowest score
 2019-05-07 06:59:50 +10:00
Michael du Breuil 7f639c1bb2 AP_NavEKF2: Allow checking all cores for failure 2019-04-09 10:53:25 +10:00
Pierre Kancir 50e99b6e1a AP_NavEKF2: use get_distance_NE instead of location_diff 2019-04-08 08:00:52 -07:00
Pierre Kancir 3f5a6a243c AP_NavEKF2: use get_distance instead of location_diff 2019-04-08 08:00:52 -07:00
Paul Riseborough 8038efc152 AP_NavEKF2: Flow use parameter updates 2019-04-02 10:51:12 +11:00
Paul Riseborough e2148e7e2a AP_NavEKF2: Update default plane optical flow param values 
Reduce time required to form estimate of terrain offset
 2019-04-02 10:51:12 +11:00
Paul Riseborough aa6eee82f4 AP_NavEKF2: Rework opt flow terrain height logic 2019-04-02 10:51:12 +11:00
Paul Riseborough 67d20f3b3c AP_NavEKF2: Update parameter description 2019-04-02 10:51:12 +11:00
Paul Riseborough 1862512c2b AP_NavEKF2: Use flow sensor for navigation with unknown platform type 
This is the more common use case.
 2019-04-02 10:51:12 +11:00
Paul Riseborough 921205f61c AP_NavEKF2: Minor amendments from review 2019-04-02 10:51:12 +11:00
Paul Riseborough a40208ebd4 AP_NavEKF2: Improve optical flow height estimation 
Updated derivation using sequential fusion of Y and X axis data.
 2019-04-02 10:51:12 +11:00
Paul Riseborough 2b8b53d6b2 AP_NavEKF2: Add parameter to control how optical flow flow data is used 2019-04-02 10:51:12 +11:00
Mark Whitehorn 6b70181837 AP_NavEKF2: add getQuaternionBodyToNED 2019-03-29 10:58:00 +11:00
Tom Pittenger 8506ae9c32 AP_NavEKF2: rename dataflash to logger 2019-03-28 16:40:57 +11:00
Dr.-Ing. Amilcar do Carmo Lucas 79ee52917f AP_NavEKF2: replace location_offset() and get_distance() function calls with Location object member function calls 
This allows removing duplicated code
 2019-02-28 11:44:09 +11:00
Arjun Vinod 78b165e36f AP_NavEKF2: fixed typos 2019-02-26 08:33:39 +11:00
Arjun Vinod a0e7c37f8c AP_NavEKF2: fixed typos 2019-02-22 10:21:35 +11:00
Tom Pittenger b32e8a4424 AP_NavEKF2: remove HAL_CPU_CLASS_150 check, 150 is already a minimum requirement 2019-02-17 12:59:52 -08:00
Tom Pittenger 8a6a39b590 AP_NavEKF3: unify singleton naming to _singleton and get_singleton() 2019-02-10 19:09:58 -07:00
Andrew Tridgell ccc1f906f8 AP_NavEKF2: fixed EKF compass switching 
when we had 3 compasses the lack of the 'break' meant when we switched
compass in flight we would always switch back instantly to the one
that we had just rejected.
 2019-02-09 13:04:52 +11:00