Commit Graph

180 Commits

Author SHA1 Message Date
Andrew Tridgell ea086fa79c Plane: added MAV_CMD_DO_INVERTED_FLIGHT support
allows for mission control over inverted flight
2014-06-05 16:12:10 +10:00
Andrew Tridgell 1e2b644b1b Plane: fix for HAL_GPIO_* 2014-06-02 10:42:36 +10:00
Andrew Tridgell 286479ee93 Plane: prevent stalled takeoff with bad TKOFF_TDRAG_SPD1
go to level pitch if pitch rises by 10 degrees
2014-05-23 07:30:59 +10:00
Andrew Tridgell d87619c2f1 Plane: added 4 new parameters to control takeoff
this gives flexible control for taildragger takeoff
2014-05-23 07:30:58 +10:00
Andrew Tridgell 511e8beaed Plane: updates for new GCS_MAVLink API 2014-05-21 12:45:25 +10:00
Andrew Tridgell 69b5f352f6 Plane: prevent a bad glide slope when first entering auto
we need to ensure that prev_WP_loc is not used as it could be
completely different from current_loc. As a precuation, this also sets
up next_WP_loc so that when the set_next_WP() is first called that
prev_WP_loc is set to current_loc
2014-05-18 16:14:11 +10:00
Andrew Tridgell bd09d8551d Plane: use setup_uart() 2014-05-16 11:44:53 +10:00
Andrew Tridgell ccc8a6a6ed Plane: use MIS_AUTORESET when entering AUTO mode 2014-04-29 11:46:06 +10:00
Andrew Tridgell 0de41f0ce1 Plane: set AHRS vehicle class 2014-04-21 18:13:12 +10:00
Andrew Tridgell 1bce4239a3 Plane: added AUTOTUNE flight mode
this is just like FBWA, but with automatic roll/pitch tuning
2014-04-12 14:12:14 +10:00
Andrew Tridgell e19341ca32 Plane: convert to new GPS driver API 2014-04-01 06:38:24 +11:00
Michael Day 25f23cf16c Plane: Sends MAV_SYS_STATUS_GEOFENCE and also allows GCS to enable/disable fence. 2014-03-27 09:26:20 +11:00
Andrew Tridgell e8b9f22b01 Plane: updates for GPS changes 2014-03-24 12:04:31 +11:00
Andrew Tridgell 0d39f354b0 Plane: use new common MAVLink code 2014-03-19 12:13:38 +09:00
Andrew Tridgell 4bf140aeac Plane: make next_WP and prev_WP be locations
having a command ID in them doesn't really make sense

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2014-03-19 12:12:39 +09:00
Randy Mackay 982ce56d2b Plane: bug fix to set_current_cmd
When set_current_cmd mavlink message is received, resume mission only if
the mission has completed.
Stop mission when vehicle leaves AUTO mode.
2014-03-19 12:12:28 +09:00
Andrew Tridgell 4992e2e2cf Plane: use mission.resume() not mission.start() 2014-03-19 12:12:19 +09:00
Randy Mackay 36a5287de5 Plane: call mission.init during startup 2014-03-19 12:11:49 +09:00
Randy Mackay 9446e9fd2e Plane: integrate AP_Mission library 2014-03-19 12:10:58 +09:00
Andrew Tridgell 65ae9663d4 Plane: set 2nd GPS as secondary 2014-03-08 21:48:12 +11:00
Andrew Tridgell 07826096a2 Plane: support a 2nd GPS 2014-02-26 09:24:23 +11:00
Andrew Tridgell 8a4289b56f Plane: remove unused variables
thanks to Mike McCauley
2014-02-24 18:49:14 +11:00
Andrew Tridgell 33851030a4 Plane: use ahrs.get_armed() 2014-02-19 10:53:26 +11:00
Andrew Tridgell 11337ab2df Plane: updates for AHRS holding home position 2014-02-15 05:29:47 +11:00
Andrew Tridgell 043c80dbe6 Plane: use new board_voltage() method 2014-02-14 21:50:59 +11:00
Andrew Tridgell e42a10a764 Plane: allow printing of GUIDED mode in logs 2014-02-02 14:04:36 +11:00
Andrew Tridgell cdd36b2c41 Plane: use AP_ServoRelayEvents library 2014-01-20 17:06:29 +11:00
Andrew Tridgell d3adf4c32c Plane: enable AP_BoardConfig 2014-01-20 17:06:28 +11:00
Andrew Tridgell cf09fef1db Plane: prevent log corruption when new log started 2014-01-14 14:29:14 +11:00
Andrew Tridgell a15336079e Plane: start logging when first needed 2014-01-14 13:51:49 +11:00
Andrew Tridgell 8755747da0 Plane: only log when armed by default
use safety switch if arming not enabled
2014-01-14 13:07:43 +11:00
Andrew Tridgell 72473e4317 Plane: use AP_HAL available_memory() call 2013-12-28 14:51:37 +11:00
Andrew Tridgell 7ffbed24cc Plane: initialise scheduler callback after logging
this could cause log corruption otherwise
2013-12-28 10:24:46 +11:00
Andrew Tridgell 263f3b116b Plane: added FS_GCS_ENABL==2 option
this allows GCS failsafe when the GCS isn't getting updates from the
aircraft
2013-12-20 11:39:00 +11:00
Andrew Tridgell 8b7fe3cf50 Plane: changes for new DataFlash API 2013-12-17 11:51:36 +11:00
Andrew Tridgell 5a0cb5dea4 Plane: added sonar logging to dataflash 2013-11-28 21:49:27 +11:00
Andrew Tridgell 8383abc1fe Plane: added SERIAL2_BAUD and rename SERIAL3_BAUD to SERIAL1_BAUD 2013-11-26 13:00:03 +11:00
Andrew Tridgell 457183b6f5 Plane: cope with uartD being NULL 2013-11-23 21:44:45 +11:00
Andrew Tridgell 2fa5e6310d Plane: added 3rd telemetry stream on platforms that have it
this generalises the gcs object usage
2013-11-23 19:29:22 +11:00
Andrew Tridgell 7e10811673 Plane: send firmware and git version in tlog 2013-11-09 10:09:20 +11:00
Andrew Tridgell fe3943e686 Plane: faster startup
make it less likely to send wrong INS_PRODUCT_ID, plus don't waste as
much time
2013-11-02 21:41:11 +11:00
Andrew Tridgell 035ac3800a Plane: use G_Dt for acro angle integration
also cleanup some other uses of performance timing
2013-10-12 13:30:27 +11:00
Andrew Tridgell eef693f243 Plane: removed some compat code
fixes warnings
2013-09-30 21:06:43 +10:00
Andrew Tridgell 444d053dc2 Plane: enable Oilpan and BMP085 on Linux 2013-09-29 01:02:05 +10:00
Andrew Tridgell b28a4f21f2 Plane: fixed uartA baud rates for APM1 2013-09-21 09:30:29 +10:00
Andrew Tridgell 21a4da0d29 Plane: removed flash_leds() calls 2013-09-19 18:38:28 +10:00
Andrew Tridgell 4bd6b2f428 Plane: use new usb_connected() function 2013-09-19 16:23:58 +10:00
Andrew Tridgell fe5a4ab710 Plane: fixed Vcc 2013-09-12 13:26:27 +10:00
Andrew Tridgell f6688582a6 Plane: added FENCE_ACTION=3 behaviour
this makes it safer to enable the geofence as a receiver failsafe
mode. It retains manual throttle control, so if it triggers on the
ground due to the receiver losing signal from the transmitter then the
throttle can be kept low, preventing an unexpected takeoff.
2013-09-08 07:31:10 +10:00
Andrew Tridgell 4a8c9a7765 Plane: support reboot to bootloader 2013-09-04 11:59:16 +10:00