Commit Graph

30181 Commits

Author SHA1 Message Date
Andrew Tridgell 743806116d HAL_ChibiOS: removed unusued ppm driver
now uses AP_RCProtocol
2018-01-20 17:40:07 +11:00
Andrew Tridgell ccb85c2707 HAL_ChibiOS: fixed fmuv3 build with no ICU 2018-01-20 17:40:07 +11:00
Andrew Tridgell f87668c15c AP_RCProtocol: lock onto a single protocol to reduce CPU cost 2018-01-20 17:40:07 +11:00
Andrew Tridgell d7c62602ed waf: added AP_RCProtocol to list of libraries for all vehicles 2018-01-20 17:40:07 +11:00
Andrew Tridgell 33c7cba9af HAL_ChibiOS: use more efficient push mechanism in IRQ
and don't use push_force() as it is not safe to do reads from within
the producer
2018-01-20 17:40:07 +11:00
Andrew Tridgell d030f2888b AP_HAL: added multi-object push to RingBuffer
this is much more efficient than pushing them one at a time
2018-01-20 17:40:07 +11:00
Andrew Tridgell 7a4f429b85 HAL_ChibiOS: don't adjust buffer size for protocol
its all about IRQ latency, not IRQ rate
2018-01-20 17:40:07 +11:00
Andrew Tridgell e2c8fe27ef HAL_ChibiOS: fixed memory handling in SoftSigReader 2018-01-20 17:40:07 +11:00
Andrew Tridgell 8be59c73c7 AP_RCProtocol: fixed return value when no input 2018-01-20 17:40:07 +11:00
bugobliterator 2ba0691d52 modules: update ChibiOS 2018-01-20 17:40:07 +11:00
bugobliterator bad9f2b4c9 AP_RCProtocol: add library to process RC signals 2018-01-20 17:40:07 +11:00
bugobliterator eeea2c9961 HAL_ChibiOS: use software signal reader for RCInput if available 2018-01-20 17:40:07 +11:00
bugobliterator 6be4c710c3 HAL_ChibiOS: add Software Signal reader using timer and DMA 2018-01-20 17:40:07 +11:00
bugobliterator 1db1ff799e HAL_ChibiOS: modify hwdef scripts to setup for generic RCIN 2018-01-20 17:40:07 +11:00
bugobliterator 1970d8a2c8 HAL_ChibiOS: use common RCIN pin for fmuv4 2018-01-20 17:40:07 +11:00
bugobliterator 445ba6ed39 HAL_ChibiOS: update ppm to use Extended ICU driver 2018-01-20 17:40:07 +11:00
bugobliterator 6d8d8630bc modules: update ChibiOS 2018-01-20 17:40:07 +11:00
Andrew Tridgell 7c23e33775 HAL_Chibios: set min output rate for oneshot to 100Hz
this will keep ESCs happy during gyro cal
2018-01-20 17:40:07 +11:00
Andrew Tridgell b07c599bf2 Hal_Chibios: allow for faster INS sample times
we need higher priority on SPI and faster device loops
2018-01-20 17:40:07 +11:00
Andrew Tridgell 25f13ed518 HAL_Chibios: adjust MPU9250 clock speed down
this helps with fast sampling enabled
2018-01-20 17:40:07 +11:00
Andrew Tridgell 7e44b06440 HAL_ChibiOS: adjust SPI clock rates on FMUv4
this prevents some timing errors on the IMUs
2018-01-20 17:40:07 +11:00
Andrew Tridgell dd59a5ff57 HAL_ChibiOS: adjust external bus clock for mpu9250
this fixes an issue with fast sampling on the PH2.1 cube
2018-01-20 17:40:07 +11:00
Andrew Tridgell 93fa74518a AP_IOMCU: limit rate to IOMCU to 500Hz
when running with very high loop rates we can saturate the IO link
2018-01-20 17:40:07 +11:00
Andrew Tridgell 880a84294e HAL_ChibiOS: support oneshot mode
supports oneshot 125 and oneshot
2018-01-20 17:40:07 +11:00
Andrew Tridgell 38a36a070f DataFlash: removed some special cases for ChibiOS 2018-01-20 17:40:07 +11:00
Andrew Tridgell 30903f2acb AP_IOMCU: support oneshot mode 2018-01-20 17:40:07 +11:00
Andrew Tridgell ba3cdf74b5 HAL_Chibios: optional ADC debugging
this debugging capability is very useful on board bringup. It outputs
the first 6 analog channels as an AP_ADC MAVLink message
2018-01-20 17:40:07 +11:00
Andrew Tridgell c863681849 HAL_ChibiOS: fixed PWM output assignment 2018-01-20 17:40:07 +11:00
Andrew Tridgell 82c6d2751f HAL_ChibiOS: fixed F412 ram and flash setup 2018-01-20 17:40:07 +11:00
Peter Barker 7c232323da waf: added support for Sparky2 STM23F405 board 2018-01-20 17:40:07 +11:00
Peter Barker 87be7fea0c AP_HAL: added support for Sparky2 STM23F405 board 2018-01-20 17:40:07 +11:00
Peter Barker 67bed1d6c2 HAL_ChibiOS: added support for Sparky2 STM23F405 board 2018-01-20 17:40:07 +11:00
Siddharth Purohit a6be19d8cf HAL_SITL: fix sitl build for mac osx 2018-01-20 17:35:08 +11:00
Andrew Tridgell 8b0e9bcff4 AP_Scheduler: use pre-computed loop constants
this prevents changing the loop rate without a reboot. Too many
subsystems rely on a consistent loop rate to allow it to be changed
2018-01-20 15:35:58 +11:00
Peter Barker f2242e07db AP_Scheduler: remove memoisation in loop_period_s() 2018-01-20 15:35:58 +11:00
Peter Barker a6ac37d0ba AP_Scheduler: eliminate MAIN_LOOP_SECONDS macro 2018-01-20 15:35:58 +11:00
Peter Barker 996115c0d3 Copter: eliminate MAIN_LOOP_SECONDS macro 2018-01-20 15:35:58 +11:00
Leonard Hall e249e06714 AC_PosControl: minor enhancement to lean_angles_to_accel 2018-01-20 09:49:58 +09:00
Andrew Tridgell 44dd079cb9 AP_Scheduler: allow for loop rates above 400Hz
with ChibiOS we can run copter at 1KHz with no scheduling misses. This
small PR allows that to be configured.
2018-01-20 10:40:37 +11:00
Andrew Tridgell e901243d8c mavlink: submodule update 2018-01-20 10:39:31 +11:00
Andrew Tridgell 100363ba03 AP_InertialSensor: if no sensors found allow parameter change 2018-01-20 10:36:22 +11:00
Andrew Tridgell 24c424ae5d AP_InertialSensor: support over 1kHz IMUs
this allows for invensense IMUs to run above 1kHz by adjusting the
downsampling rate
2018-01-20 10:36:22 +11:00
Andrew Tridgell c0c5f23aa5 AP_InertialSensor: added INS_ENABLE_MASK
this allows for only a specified subset of IMUs to be probed, so you
can disable IMUs that aren't needed.

The back corresponds to bits in the order the IMUs are normally probed
on the board
2018-01-20 10:36:22 +11:00
Andrew Tridgell 9416165fe3 AP_InertialSensor: improved invensense debugging on ChibiOS 2018-01-20 10:36:22 +11:00
Leonard Hall d5976442f8 AC_PosControl: minor comment change
non-functional change
2018-01-19 15:40:32 +09:00
Leonard Hall 3ada0f32b0 AC_AttitudeControl: minor comment update
Non-functional change
2018-01-19 15:40:24 +09:00
Dylan Herman 9d7eb188d1 Rover: enter Hold on failure to enter RTL fs action 2018-01-19 09:26:45 +09:00
Dylan Herman f3b794f698 Rover: Add SmartRTL failsafe action
Add failsafe actions SmartRTL or RTL and SmartRTL or Hold
2018-01-19 09:26:45 +09:00
Randy Mackay 6ce9b47807 Rover: calc_speed_nudge honours max speed even in reverse
calc_speed_nudge allows the pilot to increase the speed of the vehicle including cases when the vehicle is in reverse.  This fixes the nudging code so the pilot-nudged throttle does not surpass the vehicle's maximum speed even in reverse.
Thanks to  pavloblindnology for finding this!
2018-01-19 09:23:33 +09:00
Michael du Breuil c2be63b2b9 README: Update semaphore link 2018-01-18 22:40:09 +00:00