Commit Graph

805 Commits

Author SHA1 Message Date
Michael Oborne 2f6880cb89 firmware build 2012-10-20 09:30:38 +08:00
Olivier ADLER 78e88994e1 ArduPPM: Redundancy mode
Reworked the PPM decoder (i did forget the sync symbol pre-pulse)
Splitted pre-pulse and pulse width variable for better reliability and easier processing
2012-10-17 16:28:05 +02:00
Olivier ADLER 6b6e580a13 ArduPPM: Redundancy mode
Base algorithm added for channel count auto detection in the decoder himself.
Replaced the #define for PPM_CHx_CHANNELS by PPM_CHx_MAX_CHANNELS.
Channel count #define was not needed anymore thanks to the channel count auto detection.
Channel detection post processing to do.
2012-10-15 22:49:01 +02:00
Olivier ADLER b9372826b4 ArduPPM: Redundancy mode switchover algorithm
Auto Switchover algorithm with primary receiver switchback.
Force switchover channel moved to channel 9
Manual modifications.
2012-10-14 23:58:00 +02:00
Olivier ADLER ddef15b095 ArduPPM: Redundancy mode
Dual input PPM decoder rework
flags for frame and channel error control
decoder algorithm rework
2012-10-14 01:10:52 +02:00
Olivier ADLER 4f0fae5436 ArduPPM: Redundancy mode
Work in progress
adding a channel pre pulse lengt #define for each PPM mode
dual channels PPM input capture interrupt algorithm
2012-10-13 14:59:03 +02:00
Olivier ADLER 3cecc8256d ArduPPM: PPM Redundancy mode
Some rework and cleaning for #define stuff
2012-10-12 19:08:19 +02:00
Olivier ADLER 499a2931e5 ArduPPM : Redundancy mode
Work in progress on a new Redundancy dual PPM sum mode for PPM encoder.

- New library PPM_Encoder_v3.h and new manual manual_v3.txt

- New format conversion capability between input and output PPM frame timings and channel count.

This will be experimental until heavily tested. The main goal is to allow the use of low cost satellite receivers in a high safety setup, and allow a new teacher / student RC mode without link between the two pilot transmitters.
2012-10-12 14:32:14 +02:00
rmackay9 aee36ce84c VARTest.pde: fix compile errors for autotest 2012-10-11 21:52:48 +09:00
Olivier ADLER e9e5b63c1f Rename: file rename
Small cleaning removing space in filename.
2012-10-11 14:47:03 +02:00
Olivier ADLER f558727a0d Protocols : Jeti telemetry description
This is the Jeti Telemetry protocol. Common in Europe for RC multicopters telemetry through 2.4 Ghz Jeti Duplex links.
2012-10-11 11:42:45 +02:00
Olivier ADLER aaffa313ae Test: test commit
A small test
2012-10-11 11:42:45 +02:00
Michael Oborne e69f0845a5 Mission Planner 1.2.14
fix update/blank flightdata screen
add srtm blank file check
add Land to modes
2012-10-05 07:39:45 +08:00
Michael Oborne 09d8a8a2d1 Mission Planner 1.2.13
remove some mavlink 0.9 code
add arm/disarm button. Not yet implemented AC and AP Side.
modify heli setup screen
modify failsafe screen
fix old firmware under mono
workaround mono crash.
modify planner wp storage
tweak log dl screen
add change alt button
modify tlog wp extractor, multiple extractions
speed up srtm reading
fix lang edit.
2012-10-01 07:53:54 +08:00
Michael Oborne 34165aeff0 modify ardurover name to match others 2012-09-24 18:31:47 +08:00
Michael Oborne c332103b86 firmware build 2012-09-24 05:44:42 +08:00
Michael Oborne 8807758693 firmware build 2012-09-23 19:07:57 +08:00
Craig Elder 96dc207d1d Housekeeping: Removed copies of Libraries from Tools/ArduPPM/Workbasket. 2012-09-21 16:51:37 -07:00
Michael Oborne 25bcfdd1e7 Mission Planner 1.2.12
add arduino chip detect
fix apm2,2.5 dialog test
add write timeout. this will stop planner hangs on bad serial devices.
change quickview decimal places to 0.00
fix map clicking issue.
fix wind direction wrapping
add airspeed use
modify firmware screen from Marooned
major flightdata tab change.
add save/load polygon from file
add some error handling dialogs
2012-09-20 07:37:36 +08:00
Michael Oborne 67e02a815f firmware build 2012-09-17 17:48:43 +08:00
Hazy 821408ecee APM Planner
a few UI translations
2012-09-13 15:27:38 +08:00
Michael Oborne 95b6b4eb2d firmware build 2012-09-13 10:36:43 +08:00
Michael Oborne e9fdbfa969 firmware build 2012-09-09 18:09:07 +08:00
Michael Oborne a8c234c303 Mission Planner 1.2.11
Fix ac crosstrack display
tweak ap_mount
speed up Terminal
2012-09-04 06:46:56 +08:00
Michael Oborne e10829afd7 firmware build 2012-09-02 13:34:03 +08:00
Michael Oborne 5b347a1483 firmware build 2012-09-02 13:05:33 +08:00
Michael Oborne 48bb6d04a2 firmware build 2012-09-01 20:10:02 +08:00
Michael Oborne a5bd3c67c6 Mission Planner 1.2.10
add useritems to HUD
change hdop scale
fix posible follow me bug (, vs .)
fix posible friendly params bug (, vs .)
tweak flightdata log playback timming
fix gridv2 bug. if no waypoint had been done, the grid wold fail
tweak some mission upload potential issues
add ability to get param list from a log (from startup)
add ability to get the first wp list in a log, if wps where received in that log.
tweak video capture library timing
2012-08-30 20:51:29 +08:00
Andrew Tridgell d74fdf4523 APM: higher throttle on takeoff in ArduPlane autotest 2012-08-30 07:37:26 +10:00
Andrew Tridgell 5bf971c7e6 APM: fixed orientation on runway in autotest 2012-08-29 17:17:38 +10:00
Jason Short 314ce65971 Mission Planner: Update XML for 2.7.2 2012-08-28 21:22:07 -07:00
Andrew Tridgell 93cde71180 autotest: removed the --wind options
SIM_WIND_* options now control wind
2012-08-28 20:18:23 +10:00
Andrew Tridgell 7a99160ea2 autotest: loiter can be a bit slow to circle sometimes 2012-08-27 13:19:21 +10:00
Andrew Tridgell 5636d311c8 APM-autotest: fixed inside loop test
pitch 80 may not be reached due to granularity of the MAVLink logging
2012-08-27 11:45:07 +10:00
Michael Oborne bd180bcd3d Mission Planner 1.2.9
add est distance traveled
add est flight time
AP_Mount now updated
add expermental firmware options.
fix hud avi record framerate
add 2 direction wp circle
tweak gridv2
2012-08-26 12:59:21 +08:00
Michael Oborne b9fb1750d5 Mission Planner Cleanup 2012-08-25 21:48:06 +08:00
Andrew Tridgell b8decb4fd7 SITL: added SIM_WIND_* parameters
this allows control of the simulated wind during a flight
2012-08-25 17:49:26 +10:00
Michael Oborne 989b799130 Mission Planner 1.2.8
fix mjpeg stream from VLC.
add grid mode V2
fix hdop scaling
2012-08-24 07:51:21 +08:00
Michael Oborne 61277af526 firmware build 2012-08-23 11:40:10 +08:00
Andrew Tridgell ca63e23ec3 build: added sitl-newcontrollers to build_all.sh 2012-08-22 12:45:14 +10:00
Andrew Tridgell dcaea1a47a ACM: build DMP version in autotest
this gives it a chance of keeping working
2012-08-21 15:58:59 +10:00
Michael Oborne 3c78f34178 Mission Planner 1.2.7
add wind from ap
add wp every x m in grid mode
fix hil problem
fix control-s
update mavlink format
2012-08-19 16:38:58 +08:00
rmackay9 801853d9c5 AutoTest: reduced descend throttle for arducopter's change_alt test. 2012-08-19 12:33:21 +09:00
Andrew Tridgell bed3df60fb autotest: ArduCopter on a 1280 is not supported any more 2012-08-19 12:30:15 +10:00
Andrew Tridgell c534d6ad08 SITL: updated ArduPlane autotest parms
a bit more xtrack and fixed steering parameter names
2012-08-18 16:34:02 +10:00
Michael Oborne 90ccb6f3ef Mission Planner 1.2.6
add tracker location option.
fix current sensor screen
add more right click flight planner options.
make some connecting error messages more detailed.
add partial microdrones protocol output
2012-08-16 21:07:29 +08:00
Andrew Tridgell 3f76a4cc61 SITL: use rudder steering in APM autotest 2012-08-15 12:53:05 +10:00
Andrew Tridgell 90bf9c62bb SITL: added a test script for starting in Kingaroy
we use this for OBC testing
2012-08-15 12:39:34 +10:00
Andrew Tridgell b018d7ba77 SITL: make it easier to start ArduPlane SITL at any location
this generates a jsbsim startup XML file from a template
2012-08-15 12:39:34 +10:00
Andrew Tridgell 26749a7486 Failsafe: only read RC on new data 2012-08-15 12:39:33 +10:00
Andrew Tridgell 9c19ff1a2c Failsafe: added COMPETITION_MODE 2012-08-15 12:39:33 +10:00
Andrew Tridgell b499d1cc00 Failsafe: prototype of APM2 based failsafe system 2012-08-15 12:39:33 +10:00
rmackay9 71710b4514 AutoTest: set RTL's APPROACH_ALT to zero to force the copter to land instead of hanging out at 2m and causing the auto test to time out 2012-08-14 12:03:32 +09:00
rmackay9 34517349db AutoTest: update failsafe timeout to 180 to give it more time to pass. 2012-08-14 11:25:10 +09:00
Michael Oborne b04d76049c Mission Planner 1.2.5
add experimental antenna tracker find
add new apparam eeprom reader
add ground alt display to hud
mod stats
modify guided mode alt selection.
test flight planner tab on flight data tab
move some functions to the right click menu
add xplanes data in/out setup to be automatic.
add better mission upload handeling.
2012-08-12 12:25:22 +08:00
Andrew Tridgell d0709443b4 AHRS: fixed build
AP_Airspeed.h is now needed to build AHRS
2012-08-11 12:22:55 +10:00
Andrew Tridgell 16d63978f1 MAVLink: moved mavlink variables back to library
these were moved to the main sketches to allow for compile time
selection of MAVLink 0.9 vs 1.0. We no longer support 0.9, so we can
move it back, which simplifies some test sketches
2012-08-09 12:06:21 +10:00
Andrew Tridgell 988bc0238a APM: tweak Rascal autotest settings 2012-08-09 10:03:52 +10:00
Andrew Tridgell de50fff5ad AP_Param: update VARTest for new AP_Param interface 2012-08-08 12:11:57 +10:00
Michael Oborne 4b27564833 Mission Planner 1.2.4
remove geofence tab
add guided alt remeber
change wp upload retry to 200 ms
2012-08-07 19:26:10 +08:00
Michael Oborne b312938b5a Mission Planner 1.2.3
hud font move
add progress bar lock
add quickview mono fix
fix centi-degree/degree units
fix mnt config camera tab
fix some meters/feet scaling issues
2012-08-06 22:22:57 +08:00
Michael Oborne 1692cedf42 Mission Planner 1.2.2
add DegreeTracker
fix popout tab on config page
add remember last config tab
fix bytes send count
fix deactivate bug
fix ap_limits bug
fix ap_mount bug
2012-08-02 18:04:54 +08:00
Michael Oborne 2e8c6151c3 firmware build 2012-08-01 15:24:39 +08:00
Michael Oborne 529e1bcc71 Mission Planner 1.2.1
add enable/disable to mavlinkcheckbox
modify my button to curved
add delay to progress reporter dialog. to ensure correct parent
Fix Mount screen for AP
Fix Hardware screen Text
display roi difrently
modify HIL/Quad Hil
update dataflashlog format (thanks randy)
update mavcmd format for roi
2012-07-30 07:23:42 +08:00
Michael Oborne 327426fd66 firmware build 2012-07-26 10:31:30 +08:00
Michael Oborne 11a56c4df1 Mission Planner 1.2
Enable Mount config screen
Add Quick View (double click to change)
fix mono updater issue
RFD900 transmit values Mod
new mavlink controls (wip)
2012-07-25 21:44:24 +08:00
Michael Oborne 5beb60b93e firmware build 2012-07-25 02:38:53 +08:00
wiseman a36a9e86b9 Use MAVPROXY_CMD instead of MAVPROXY 2012-07-23 21:30:50 -07:00
wiseman da2f3d7f6d Added run_sim_mission. 2012-07-23 21:29:24 -07:00
Michael Oborne 944488afaf APM Planner 1.1.99
Convert to IActivate, IDeactivate scheme, thanks andrew
add support for rfcomm* interfaces on linux
fix guage off screen draw mono issue.
remove use of BackStageViewContentPanel
andrews spacer changes - not using dues to screen space issue
change configpanel constructor to load xml directly
remove IMavlink Interface
fix hsi off screen draw issue on mono
modify hud to use sprite fonts, instead of drawing via GDI+
modify progress reporter to use a 10hz timer to update screen, using invoke/begininvoke fails on mono at 50hz (over 100ms per call).
fix targetalt and target airspeed jumping issue.
lots of cleanup on tab switching, ie stoping timers/other
3dr radio status led update
update ardurover car icon
speedup georef image screen. tested on over 1000 images.
2012-07-22 15:51:05 +08:00
Andreas M. Antonopoulos 5c6b22dbd0 param_parser: input validation bug fix 2012-07-16 23:37:13 -07:00
Michael Oborne 2ccb6a281e Planner
missed files
+ cleanup old binarys
2012-07-16 21:43:49 +08:00
Michael Oborne f48e86747f APM Planner 1.1.98
Modify BackStage View - will change again soon
modify target alt calc
change order on param lists
remove old firmware selection dialog
add hil mod flag to hil connect
implement main switcher - will change again soon
change some invokes to async, to prevent other threads slowing.
fix mavlink log graphing error
modify help text
general mono for mac fixs - still combating https://bugzilla.xamarin.com/show_bug.cgi?id=3124
2012-07-16 21:37:35 +08:00
Michael Oborne 0fe874eec6 APM Planner 1.1.97
add toy Mode
fix some mono issues
fix opengl hud issue
change config font size
modify mylabel for mono
modify default telem rates
add extra sonar option
remove 0 home alt check
fix terminal hang issue
remove application idle call, causes 100% cpu on mono
update gimbal icons
modify graph line thinkness
2012-07-12 22:06:22 +08:00
Andrew Tridgell a34381657a autotest: create kmz files on timeout 2012-07-10 09:13:16 +10:00
Andreas M. Antonopoulos 3b0a4f8c68 param_parser: cosmetic
Arduplane: doc fixes
2012-07-08 21:45:26 -07:00
Andreas M. Antonopoulos dd038533f1 auto est: modular tests and unit testing with Junit.xml output for jenkins
autotest: unit testing for jenkins
- parameterized unit testing
- modular python test modules
- test groups by directory
- select tests individual or by group
- skip tests individually or by group

arducopter.py: parameterized several functions to allow throttle settings and timeouts

test modules: extracted and copied 8 tests from Tridge's autotest into modules

junit.xml: xml template for unit test reporting to jenkins
2012-07-05 23:48:50 -07:00
Michael Oborne b3fab35b44 APM Planner 1.1.96
Fix camera stab reverse boxs
add better param data duplicate handling
add rfd900a
tweak terminal settings
2012-07-06 07:27:42 +08:00
Andrew Tridgell bc4beb2345 autotest: don't set a negative max pitch limit!
this didn't do well in the simulator :-)
2012-07-05 17:59:37 +10:00
Andrew Tridgell 11b13001f4 autotest: tweak the Rascal tuning 2012-07-05 17:59:37 +10:00
Andreas M. Antonopoulos 4de662e2af param_parser - better tolerance for missing parameters 2012-07-04 23:01:52 -07:00
Andreas M. Antonopoulos 1b98bddaae parameter metadata parser: better values formatting 2012-07-04 21:27:58 -07:00
Andreas M. Antonopoulos 6509ed74cd parameter metadata parser: escape wiki characters 2012-07-04 20:55:55 -07:00
Andrew Tridgell fe54329de2 MAVLink: remove MAVLink 0.9 protocol support
this simplifies the code a lot. We're not going back to 1.0
2012-07-05 13:00:46 +10:00
Andrew Tridgell 2861e235bb CPUInfo: added acos(), asin() and atan2() 2012-07-05 13:00:46 +10:00
Andreas M. Antonopoulos 1b4bc490a0 parameter metadata parser, display improvements 2012-07-04 17:58:09 -07:00
Andreas M. Antonopoulos 400e313377 parameter metadata -> wiki, bug fixes 2012-07-04 17:42:38 -07:00
Andreas M. Antonopoulos d5d5c3923f parameter metadata parser and wiki generator 2012-07-04 16:44:53 -07:00
Andrew Tridgell 8b7fc364f9 autotest: change loiter heading accuracy to 10 2012-07-04 15:59:35 +10:00
Andrew Tridgell b3c9cdb353 SITL: fixed the normalisation of the DCM matrix in the multicopter sim 2012-07-04 15:59:15 +10:00
Andrew Tridgell e54e3f813d SITL: don't enable wind until we are off the ground
this makes it possible to test with much larger wind speeds, without
the sim crashing due to the wind flipping us over on the runway
2012-07-03 10:19:20 +10:00
Michael Oborne dad36d2e42 APM Planner 1.1.95
fix config panel value change detection
add loiter_ to AC config screen
Add praram name to Friendly param, and exception ignoring.
fix param file note line
intergrate andrews gimbal config.
fix any possible log appending issues
remove old cli planner on connect
modify speech to not crash on windows mono
2012-07-01 17:51:22 +08:00
Pat Hickey 2d71a2affc Autotest: use mktemp instead of tempfile
* tempfile has been deprecated in favor of mktemp on debian, not available
  on fedora
2012-06-27 14:28:22 -07:00
Michael Oborne 4e7fe5ec5c APM Planner 1.1.94
Fix Issue 668 - typo
Fix issue 666 - now defaults to mav 1.0 planner
Fix Issue 665 - mavlink 1.0 is now default
Fix Issue 663 - increase timeout from 6 seconds to 12 seconds
Fix Issue 662 - now reads sat count for mav 1.0
Partial Issue 654 - added current to status, hud still wip
Fix Issue 648 - add validation to value
Fix Issue 638 - add delay
Fix Issue 636 - check for version.txt in app directory
Fix config panel null bug
Add more Ardurover config options
Add Exceptions handling to video format selection
Add FORMAT_VERSION to param file ignore list
Fix NOTE param file line
Add APMRover hidden firmware upload (control-R) on firmware screen.
fix possible speach engine exception
add dataflashlog for apmrover
2012-06-27 20:46:17 +08:00
Michael Oborne f86f5dc025 firmware build 2012-06-27 19:10:43 +08:00
Andrew Tridgell 624fdda89c autotest: switch to full accel modelling in multicopter simulation
the new AHRS code should allow for centripetal compensation in
multicopters
2012-06-27 16:01:50 +10:00
Andrew Tridgell 69e68783d3 ArduTracker: update for new compass interface 2012-06-27 16:01:50 +10:00
Michael Oborne 93e8bee44e firmware build 2012-06-27 08:00:18 +08:00
Andreas M. Antonopoulos 678b12af25 AC2.6: Fix battery calculation and scaling bug for MAV1.0, now same as ArduPlane
http://code.google.com/p/arducopter/issues/detail?id=430
2012-06-24 17:01:25 -07:00
Michael Oborne b9bf84c7af APM Planner 1.1.93
fix armed/disarmed message
2012-06-19 07:15:40 -07:00