Andrew Tridgell
ad8669ae74
Plane: update release notes for 4.1.0beta8
2021-09-15 14:21:12 +10:00
Hwurzburg
01c41dc213
Plane:Tailsitter: add relaxed POSXY defaults
2021-09-15 07:40:12 +10:00
Peter Barker
974af3edea
Plane: correct compilation when QUADPLANE disabled
2021-09-14 13:55:01 +10:00
Peter Barker
3d34e061fe
ArduPlane: add and use HAL_QUADPLANE_ENABLED
2021-09-14 11:23:18 +10:00
Josh Henderson
1da21c3b21
Quadplane: use vector.xy().length() instead of norm(x,y)
2021-09-14 10:43:46 +10:00
Andrew Tridgell
cb307891e0
Plane: fixed bad yaw rate demands in tailsitter fixed wing modes
...
this prevents the pilot putting in crazy yaw rate demands due to the
use of rudder stick in fixed wing modes for tailsitters while still
allowing for FBWA flat turns if the user wants them.
It uses the existing RUDD_DT_GAIN parameter for a gain scaling of yaw
rate for copter tailsitters
2021-09-14 07:55:40 +10:00
Iampete1
b18da48f39
Plane: remove AUTO_FBW_STEER
2021-09-12 22:12:32 -05:00
Andrew Tridgell
3ec53e2aec
Plane: prepare for 4.1.0beta7
2021-09-11 09:48:31 +10:00
Leonard Hall
f3dc47ce3d
Copter: Add units to the AC_AttitudeControl Library
2021-09-09 08:01:14 +09:00
Iampete1
e6968395c6
Plane: remove none-functional NAV_CONTROLLER param
2021-09-08 20:32:52 +09:00
Iampete1
71e2e25313
Plane: attitude: in vtol modes call mode run and stabalize with surfaces
2021-09-08 18:06:58 +10:00
Iampete1
c73207b4b0
Plane: quadplane: remove init mode and control run methods
2021-09-08 18:06:58 +10:00
Iampete1
a985e47d45
Plane: system: don't try and switch to VTOL modes if quadplane is not enabled
2021-09-08 18:06:58 +10:00
Iampete1
e4feea9457
Plane: mode enter init auto state vtol mode to is_vtol_mode
2021-09-08 18:06:58 +10:00
Iampete1
2582159d1a
Plane: mode.h remove init method
2021-09-08 18:06:58 +10:00
Iampete1
fae22b34b7
Plane: mode_qstabilize: combine enter and init
2021-09-08 18:06:58 +10:00
Iampete1
63be15e018
Plane: mode_qrtl: combine enter and init
2021-09-08 18:06:58 +10:00
Iampete1
fa908b0a1d
Plane: mode_qloiter: combine enter and init
2021-09-08 18:06:58 +10:00
Iampete1
70d9d20faf
Plane: mode_qland: combine enter and init
2021-09-08 18:06:58 +10:00
Iampete1
5ebd439712
Plane: mode_qhover: combine enter and init
2021-09-08 18:06:58 +10:00
Iampete1
f055471d8a
Plane: mode_qautotune: call init
2021-09-08 18:06:58 +10:00
Iampete1
64aba43b56
Plane: mode_qacro: combine enter and init
2021-09-08 18:06:58 +10:00
Iampete1
fd7a879c85
Plane: remove unused params
2021-09-08 17:21:23 +10:00
Hwurzburg
327f3a0803
ArduPlane: add option for man throttle center to be TRIM_THROTTLE
2021-09-07 10:02:26 +10:00
Iampete1
95fbf39f72
Plane: quadplane: check_attitude_relax use the last time the controllers were run not the last time relax was checked
2021-09-07 09:09:47 +10:00
Iampete1
fb8fb34cfc
Plane: tailsitter: don't relax attitude control in transision to VTOL, rely on check_attitude_relax to do the right thing
2021-09-07 09:09:47 +10:00
Hwurzburg
5ca652a243
Plane: rename tailistter motor class to more correct singl/dual motor layout
2021-09-06 10:14:05 +10:00
Peter Barker
d6a2056cca
ArduPlane: make bad-mode-number notification consistent across vehicles
2021-09-01 19:45:46 +09:00
Peter Barker
0a8e1575b1
Plane: reuse set_mode_by_number implementation
...
Was just duplicated
2021-09-01 19:45:46 +09:00
Iampete1
88f2f7ccae
Plane: remove unused param OVERRIDE_SAFETY
2021-09-01 18:46:18 +10:00
Andrew Tridgell
3bb17697fd
Plane: fixed params for Q_TAILSIT_ENABLE
2021-09-01 14:04:35 +10:00
Iampete1
7f8b7b66a9
Plane: tailsitter: add enable = 2 for force q assit and assisted flight airmode
2021-09-01 08:33:24 +10:00
Iampete1
f1477a6c29
Plane: quadplane: add assisted flight only airmode
2021-09-01 08:33:24 +10:00
Iampete1
4efa9866fa
Plane: arming: do not disable asisted flight airmode on disarm
2021-09-01 08:33:24 +10:00
Iampete1
46670f7bd0
Plane: quadplane: move tailsitter items to dedicated setup
2021-09-01 08:33:24 +10:00
Iampete1
700a92f036
plane: quadplane: tailsitter: run FW transition check and assist immediately
2021-08-31 10:34:33 +10:00
Peter Hall
657fcb7f59
Plane: quadplane: set last_pidz_init_ms
2021-08-31 09:58:03 +10:00
Iampete1
3c44a4fe6b
Plane: radio: remove recompute_pwm_no_deadzone calls in training mode
2021-08-31 09:48:59 +10:00
TunaLobster
d31f3eb4c5
Plane: Add TRIM_PITCH_CD FLIGHT_OPTIONS bits for GCS and OSD
2021-08-31 09:32:10 +10:00
Andrew Tridgell
a39a948c57
Plane: updated releases notes for 4.1.0beta6
2021-08-29 11:35:08 +10:00
Peter Barker
bfe9208849
ArduPlane: add and use HAL_BUTTON_ENABLE
2021-08-25 19:03:42 +10:00
Iampete1
70ab9ba3b6
Plane: tailsitter: remove pilot prop-hanging teaching params and code.
2021-08-25 18:47:51 +10:00
Hwurzburg
551d55a85c
ArduPlane: add thr position trigger to ThrLandCtrl Q_OPTION
2021-08-25 12:32:59 +10:00
Andrew Tridgell
3228b0e670
Plane: added MCU_STATUS message
2021-08-25 07:11:31 +10:00
Iampete1
d372907a98
Plane: Quadplane: add Q_OPTION to only allow arming in Qmodes and auto.
2021-08-24 10:39:12 +10:00
Samuel Tabor
65a38b26a4
ArduPlane: altitude: rangefinder correction should be relative to the altitude source being used for navigation. This avoid applying it twice when there is an existing correction saved.
2021-08-19 17:59:33 +10:00
Andrew Tridgell
e1b73a5198
Plane: added slew rate and Dmod for PID_TUNING message
2021-08-19 12:08:54 +10:00
TunaLobster
cbf6c2926f
ArduPlane: Remove @RebootRequired: False
2021-08-19 10:00:16 +10:00
Peter Barker
e0d03ce565
ArduPlane: move wind-estimation-enabled state to frontend
2021-08-18 18:37:39 +10:00
Peter Barker
a84fda9b1f
Plane: adjust for rename yaw_initialised -> dcm_yaw_initialised
2021-08-18 18:37:39 +10:00
