Commit Graph

6478 Commits

Author SHA1 Message Date
Randy Mackay
dfbb357aaf Copter: minor formatting fix 2020-06-24 21:26:30 +09:00
Randy Mackay
0f6e2b6960 Copter: fix GUID message scaling for pos and velocity 2020-06-24 21:26:30 +09:00
Randy Mackay
ac21becb6a Copter: simplified update of ekf terrain height stable setting 2020-06-24 21:16:50 +09:00
Randy Mackay
980c1f5020 Copter: update ekf terrain height stable setting
setting is true only when taking off or landing and horizontal speed is no more than 0.5m/s
2020-06-24 21:16:50 +09:00
Andy Piper
25dcc1a623 Copter: add support for individually tracking fft peaks and motor rpms with harmonic notches
log harmonic notch even if FFT is disabled. Fallback to throttle notch for BLHeli
move harmonic notch update to AP_Vehicle
2020-06-21 19:09:35 +10:00
Iampete1
e797685771 Copter: add set guided mode angle for scripting 2020-06-19 10:09:35 +10:00
Andy Piper
8d2f2443a2 Copter: add air mode aux function 2020-06-16 20:30:26 +10:00
Peter Barker
0eb03ba7d5 Copter: make SuperSimple type-safe 2020-06-16 19:39:42 +10:00
Randy Mackay
d35643a372 Copter: 4.0.4-rc2 release notes 2020-06-16 14:17:12 +09:00
Peter Barker
a629e91f30 ArduCopter: rename 'enum aux_switch_pos_t' to 'enum class AuxSwitchPos' 2020-06-12 08:11:46 +10:00
Andrew Tridgell
2cd5519d5d Copter: rename 2D rotation functions
drop the rotate prefix
2020-06-04 09:49:52 +10:00
Tatsuya Yamaguchi
cde7ae246e Copter: add ZIGZ_AUTO_ENABLE parameter 2020-06-03 15:21:21 +09:00
Tatsuya Yamaguchi
78fd5fac04 Copter: allow to resume in ZigZag Auto 2020-06-03 15:21:21 +09:00
Tatsuya Yamaguchi
cee7e94ebc Copter: add zigzag_line_num parameter 2020-06-03 15:21:21 +09:00
Tatsuya Yamaguchi
7bc528097d Copter: support zigzag auto feature 2020-06-03 15:21:21 +09:00
Tatsuya Yamaguchi
60fb275501 Copter: rename zigzag_auto_pump to zigzag_sprayer 2020-06-03 15:21:21 +09:00
Tatsuya Yamaguchi
63002111eb Copter: add ZIGZAG_WP_DELAY parameter 2020-06-03 15:21:21 +09:00
murata
923237ffd3 Copter: Enumerate A and B points of ZigZag 2020-06-03 15:21:21 +09:00
Peter Barker
9b64ca040d Copter: do not adjust trims while landed
Closes #1282

Also cancels autotrim if you change modes, disarm the vehicle or land
again.
2020-06-03 16:19:01 +10:00
Randy Mackay
d2b94bd45d Copter: verify_circle removes redundant setting of circle center
the circle center is already set in circle_movetoedge_start
2020-06-03 10:08:52 +09:00
Andrew Tridgell
e673bd8909 Copter: implement disarm on land based on MIS_OPTIONS
only continue with mission if MIS_OPTIONS bit is set
2020-06-02 09:12:22 +09:00
mmk0102
c0d7739929 Copter: move check for duplicate auxswitch options up 2020-06-02 09:43:31 +10:00
Randy Mackay
baa33d99a9 Copter: version to 4.1.0-dev 2020-06-01 12:58:12 +09:00
Randy Mackay
ce17844a72 Copter: release notes update for 4.0.4-rc1 2020-06-01 12:55:39 +09:00
Randy Mackay
fb2ac2db93 Copter: release notes for 4.0.4-rc1 2020-06-01 12:55:37 +09:00
Andy Piper
3515dc9322 Copter: make sure AP_Vehicle::fast_loop() gets called 2020-05-24 07:43:34 +10:00
Gone4Dirt
9269ee50ed Copter: Allow manual autorotations without enabling arot flight mode 2020-05-20 21:56:09 -04:00
Iampete1
13d6a887fd Copter: align GCS PID with logged 2020-05-19 09:04:16 +10:00
murata
520782d7f2 Copter: Correction of spelling errors (NFC) 2020-05-18 13:26:11 +10:00
Randy Mackay
64360f263c Copter: land detector allows larger lean angle request in land mode 2020-05-14 08:24:29 +09:00
chobits
8ce27afba0 Copter: fix mode and fence gps check fail message 2020-05-11 10:41:06 +09:00
Tatsuya Yamaguchi
875fa36018 Copter: remove an unnecessary condition 2020-05-05 11:03:38 +10:00
Tatsuya Yamaguchi
9c3a0b863f Copter: use check_failed function for ESTOP arming check 2020-05-05 11:03:38 +10:00
Randy Mackay
944939fde3 Copter: remove unused heli definitions 2020-05-02 11:32:09 +09:00
Randy Mackay
e889f6091e Copter: fix Throw param desc 2020-05-02 11:32:06 +09:00
Dr.-Ing. Amilcar do Carmo Lucas
d1eb03df30 Copter: Report MAV_SYS_STATUS_SENSOR_Z_ALTITUDE_CONTROL and MAV_SYS_STATUS_SENSOR_XY_POSITION_CONTROL as healthy if the flight mode says so.
Brings it up to the Sub and Plane status
2020-05-01 08:14:11 +09:00
Peter Barker
ba5bbcdea7 ArduCopter: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
Andrew Tridgell
265b9a42fb ArduCopter: invalidate param count when changing param tree structure 2020-04-29 07:36:55 +10:00
Randy Mackay
d9ecf51457 Copter: auto mode loiter-turns accepts pilot yaw input 2020-04-27 09:39:46 +09:00
murata
e1df6933f0 Copter: Set the minimum value to zero. 2020-04-27 08:57:49 +09:00
Randy Mackay
77ff169757 Copter: minor comment fix 2020-04-24 18:18:05 +09:00
Randy Mackay
680e417c2c Copter: remove unnecessary includes 2020-04-24 18:18:05 +09:00
Randy Mackay
6c48a9c305 Copter: use AHRS::get_primary_core_index instead of EKF2 equivalent 2020-04-24 18:18:05 +09:00
Randy Mackay
ddaa5dee86 Copter: use static assert to simplify use of EKF_CHECK_ITERATIONS_MAX 2020-04-24 09:43:23 +10:00
Paul Riseborough
8ce97af40e ArduCopter: Preserve original check criteria 2020-04-24 09:43:23 +10:00
Paul Riseborough
36031c01a9 ArduCopter: rework ekf check to use separate yaw reset request
ArduCopter: Request lane or yaw reset switch sooner

ArduCopter: rework ekf check to use separate yaw reset request

ArduCopter: Rework EKF failsafe

During flight operations it is the deviation in position of the vehicle that matters during most scenarios.
t patch ensures that an EKF fail-safe will be triggered when the position inconsistency exceeds check limits in addition to either a bad mag or velocity innovation.
This will stop velocity noise triggering an early fail-safe when electromagnetic interference is present.
2020-04-24 09:43:23 +10:00
Randy Mackay
dcbbd047b4 Copter: simplify guided mode takeoff using rangefinder 2020-04-23 15:01:46 +09:00
Tatsuya Yamaguchi
29dcbd1398 Copter: use rangefinder to takeoff altitude in guided mode 2020-04-23 15:01:46 +09:00
Randy Mackay
c4b5d47e1f Copter: white space fixes 2020-04-23 13:17:11 +09:00
Randy Mackay
b32c5a840b Copter: do not send ahrs3 mavlink message 2020-04-22 14:11:17 +09:00