Iampete1
|
551a7b8a20
|
Copter: `send_available_mode` report custom scripting modes
|
2024-11-26 08:44:31 +09:00 |
Iampete1
|
67bca38151
|
Copter: add support for `AVAILABLE_MODES` msg
|
2024-11-13 20:11:50 +11:00 |
Peter Barker
|
8df33ce229
|
ArduCopter: add specific defines for sending of GPS mavlink messages
|
2024-11-13 19:40:19 +11:00 |
Peter Barker
|
2c401ccec5
|
Copter: rename ADVANCED_FAILSAFE to AP_COPTER_ADVANCED_FAILSAFE_ENABLED
to make integration with custom build server work
|
2024-11-12 12:44:34 +11:00 |
Nick Exton
|
03db86427a
|
Copter: Handle DO_MOUNT_CONTROL yaw angle as body frame
And only accept if the mode is MAV_MOUNT_MODE_MAVLINK_TARGETING. This matches the handlers in AP_Mount.
|
2024-10-08 08:05:27 +09:00 |
Peter Barker
|
47618ccb72
|
ArduCopter: split sending terrain report from terrain request
|
2024-10-01 10:13:06 +10:00 |
Iampete1
|
25e77a5d9f
|
Copter: GCS_MAVLink: use pos control `is_active_xy` to set `base_mode` `GUIDED_ENABLED` flag
|
2024-09-27 07:54:35 +09:00 |
Thomas Watson
|
873fe1df82
|
ArduCopter: only send airspeed when enabled
Avoids debug message spam about sending an unknown message.
|
2024-09-23 18:53:27 +10:00 |
Iampete1
|
9c5d071653
|
ArduCopter: add Airspeed to raw sensor stream rates
|
2024-09-17 09:10:17 +10:00 |
Peter Barker
|
784760342d
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
Peter Barker
|
6b2f3ff591
|
ArduCopter: emit MAV_RESULT_DENIED if start/stop item passed to MAV_CMD_MISSION_START
|
2024-08-20 09:38:43 +10:00 |
Peter Barker
|
42cf3aed97
|
Copter: use HAL_PARACHUTE_ENABLED in place of PARACHUTE_ENABLED
|
2024-08-07 18:09:23 +10:00 |
Peter Barker
|
86faf1ac52
|
ArduCopter: add build option to not send RC_CHANNELS_RAW
we keep this around in case we break old OSD setups
|
2024-07-30 10:29:58 +10:00 |
Leonard Hall
|
b45b07d539
|
Copter: Fix rate input frame and clarify SET_ATTITUDE_TARGET
|
2024-06-26 11:22:54 +10:00 |
richaravoil
|
b782d24f87
|
ArduCopter: get MAV_STATE_BOOT on reboot
Co-authored-by: Peter Hall <33176108+IamPete1@users.noreply.github.com>
|
2024-06-18 20:22:29 +09:00 |
Iampete1
|
5b9848c5e1
|
Copter: support `DO_RETURN_PATH_START`
|
2024-04-30 08:03:39 +09:00 |
Peter Barker
|
5de6e20ecd
|
Copter: factor out methods for guided-mode commands
|
2024-04-14 13:19:07 +10:00 |
Peter Barker
|
5d41125b49
|
ArduCopter: move handling of DO_SET_HOME up to GCS_MAVLink base class
|
2024-04-09 09:35:16 +10:00 |
Peter Barker
|
cb76ce534b
|
ArduCopter: move AC_Avoidance defines into libraries
|
2024-03-11 18:07:18 +11:00 |
Iampete1
|
e9397e10f9
|
ArduCopter: don't try and send MSG_RANGEFINDER if AP_RANGEFINDER_ENABLED is false
|
2024-03-05 12:32:20 +11:00 |
Peter Barker
|
4c2cc511e6
|
ArduCopter: handle RADIO_STATUS is GCS base class
|
2024-01-24 18:43:15 +11:00 |
Peter Barker
|
8cda4ad924
|
ArduCopter: use virtual method for GCS_MAVLink::handle_message
use more appropriate naming for the method.
|
2024-01-24 09:07:41 +11:00 |
Peter Barker
|
7377b3f8f2
|
ArduCopter: allow compilation with HAL_LOGGING_ENABLED false
|
2024-01-17 18:25:55 +11:00 |
Peter Barker
|
a84e9e8e6c
|
Copter: don't send WINCH_STATUS message if winch not enabled
|
2023-11-26 20:59:14 +09:00 |
Peter Barker
|
c531d81cb3
|
ArduCopter: stop streaming trying SIM_STATE messages outside sim
|
2023-11-20 19:25:25 +11:00 |
Peter Barker
|
1059183758
|
ArduCopter: tidy sending of winch messages
|
2023-11-20 19:25:25 +11:00 |
Peter Barker
|
621e245b10
|
ArduCopter: tidy sending of esc telem generator messages
|
2023-11-20 19:25:25 +11:00 |
Peter Barker
|
256f373d7f
|
ArduCopter: tidy sending of queued generator messages
|
2023-11-20 19:25:25 +11:00 |
Peter Barker
|
88a862f128
|
ArduCopter: tidy sending of queued mcu status messages
|
2023-11-20 19:25:25 +11:00 |
Peter Barker
|
a97d51c877
|
ArduCopter: tidy sending of queued opticalflow messages
|
2023-11-20 19:25:25 +11:00 |
Peter Barker
|
dbc0f02649
|
ArduCopter: tidy sending of queued mount messages
|
2023-11-20 19:25:25 +11:00 |
Peter Barker
|
e7ff4a43ca
|
ArduCopter: add and use AP_MAVLINK_COMMAND_LONG_ENABLED
|
2023-11-16 10:50:21 +11:00 |
Peter Barker
|
875580069c
|
ArduCopter: tidy use of GPS mavlink defines
|
2023-10-27 14:16:47 +11:00 |
Peter Barker
|
20563bf58d
|
ArduCopter: save bytes when AP_AIS_ENABLED is false
|
2023-10-27 14:16:47 +11:00 |
Peter Barker
|
d46859aa96
|
ArduCopter: remove MSG_BATTERY_STATUS from steams if AP_BATTERY_ENABLED is false
|
2023-10-26 13:23:57 +11:00 |
Peter Barker
|
ca3b5a860a
|
ArduCopter: handle MAV_CMD_NAV_TAKEOFF via command_long and command_in
|
2023-10-24 12:59:19 +11:00 |
Peter Barker
|
cd92e301ab
|
ArduCopter: don't send fence_status mavlink message if fence not compiled in
|
2023-10-04 19:13:23 +11:00 |
Peter Barker
|
ef1952e1c0
|
Copter: acccept DO_LAND_START as both int and long
|
2023-09-29 13:55:32 +10:00 |
Peter Barker
|
d54d9ae922
|
ArduCopter: accept several mode-changing commands via command_int
... as well as via command_long
|
2023-09-29 08:56:50 +10:00 |
Peter Barker
|
a0ca3ffb22
|
ArduCopter: handle MAV_CMD_DO_FLIGHTTERMINATION as both long and int
|
2023-09-27 11:27:45 -07:00 |
Peter Barker
|
efc2c39c96
|
ArduCopter: remove COMPASS_CAL messages from streamrates if tumble cal disabled
fatal error in SITL if we try to send messages with these disabled
|
2023-09-26 11:39:50 +10:00 |
Peter Barker
|
ad9a36c157
|
Copter: allow MAV_CMD_CONDITION_YAW to be run as COMMAND_INT
|
2023-09-26 11:35:55 +10:00 |
Peter Barker
|
c61022f596
|
Copter: handle DO_CHANGE_SPEED as both COMMAND_LONG and COMMAND_INT
|
2023-09-20 15:44:38 +10:00 |
Peter Barker
|
b3dd5c20c5
|
Copter: handle MISSION_START as both COMMAND_LONG and COMMAND_INT
|
2023-09-20 09:39:31 +10:00 |
Peter Barker
|
624cfc8fcc
|
ArduCopter: handle MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN as INT or LONG
|
2023-09-19 11:16:10 +10:00 |
Peter Barker
|
4c6918afea
|
ArduCopter: handle DO_PARACHUTE as both command_long and command_int
|
2023-09-19 11:14:29 +10:00 |
Peter Barker
|
5e9c2a04d0
|
Copter: allow motor tests to be triggered with COMMAND_INT
|
2023-09-13 18:14:31 +10:00 |
Peter Barker
|
619b1ecd47
|
ArduCopter: support preflight calibration via command_int
|
2023-09-13 17:24:07 +10:00 |
Peter Barker
|
38ba5da09b
|
Copter: allow winch commands to be run as both COMMAND_LONG and COMMAND_INT
|
2023-09-12 09:30:27 +10:00 |
Peter Barker
|
496e6b18ff
|
Copter: accept solo buttons as both long and int
|
2023-09-05 09:58:53 +10:00 |