Commit Graph

185 Commits

Author SHA1 Message Date
Randy Mackay 63e579d738 AP_NavEKF3: add using_extnav_for_yaw 2021-08-31 09:20:17 +10:00
Randy Mackay 0edfd2634f AP_NavEKF3: rename using_external_yaw to using_noncompass_for_yaw 2021-08-31 09:20:17 +10:00
TunaLobster d6a5622fcb AP_NavEKF3: Remove @RebootRequired: False 2021-08-19 10:00:16 +10:00
Andrew Tridgell 5c86cc6828 AP_NavEKF3: added EK3_PRIMARY parameter
allows for selection of which IMU to use on startup
2021-08-17 06:42:42 +10:00
Randy Mackay d961186e0c AP_NavEKF3: remove unused EK3_GSF_DELAY param 2021-08-06 07:00:46 +09:00
Paul Riseborough 17ead96250 AP_NavEKF3: Revert IMU and wind speed process noise parameter defaults
These give noisier state estimates, but are more robust to rapid changes in IMU biases.
TODO implement a means of using the modified parameters when there are more than one EKF instance running with IMU's that are sampling at a higher rate.
2021-07-22 18:20:45 +10:00
Paul Riseborough aa6ac4a874 AP_NavEKF3: retune wind process noise for better airspeed fault detection 2021-07-22 18:20:45 +10:00
Paul Riseborough 8fd1e98701 AP_NavEKF3: Fix bug preventing copter wind estimation at low speed
Also re-tunes process noise default for smoother wind velocity state estimates.
2021-07-22 18:20:45 +10:00
Paul Riseborough 0088b0f3fe AP_NavEKF3: Revert EK3_BETA_MASK parameter extension
These are not required due to use of bit 7 in FLIGHT_OPTIONS to achieve the same function.
2021-07-22 18:20:45 +10:00
Paul Riseborough 59d31cc7d5 AP_NavEKF3: Rework non-airspeed wind estimation
Faster wind estimation when not using airspeed with acceptable noise in wind velocity estimates.
2021-07-22 18:20:45 +10:00
Paul Riseborough ccc95d8726 AP_NavEKF3: Add accessor function for vibration affected status 2021-07-22 18:20:45 +10:00
Paul Riseborough 5eb7751682 AP_NavEKF3: Adjust gyro bias process noise tuning
NEw value is a compromise between roll/pitch angle and horizontal state velocity estimation errors and the noise in the gyro bias estimate
2021-07-22 18:20:45 +10:00
Paul Riseborough 0f2661c31c AP_NavEKF3: Retune IMU process noise
Required to achieve equivalent fusion noise and weighting on IMU vs other sources to previous param defaults with the old covariance prediction equations.
2021-07-22 18:20:45 +10:00
Paul Riseborough 171eed5d85 AP_NavEKF3: Make gyro bias learning less noisy 2021-07-22 18:20:45 +10:00
Peter Barker 795f412264 AP_NavEKF3: pass NavEKF failures back up to callers 2021-07-21 18:02:26 +10:00
Andrew Tridgell 885e518741 AP_NavEKF3: allow for double EKF build 2021-07-10 07:20:41 +10:00
Randy Mackay 4fde26aa01 AP_NavEKF3: EK3_RNG_USE_HGT param references EK3_SRCx_POSZ 2021-07-05 08:42:06 +09:00
Josh Henderson 0ae3730f11 AP_NavEKF3: non_GPS modes ensure EKF origin set only once and stays in sync
ekf3
2021-06-22 12:01:10 +10:00
Peter Barker d6348a0786 AP_NavEKF3: remove getBodyFrameOdomDebug
Not used after we moved logging to be within AP_NavEKF3
2021-06-07 09:28:52 +10:00
Peter Barker dd3ab29b2f AP_NavEKF3: remove getFilterGpsStatus
Not needed after we moved logging into NavEKF3
2021-06-07 09:25:53 +10:00
Paul Riseborough 124f016e5b AP_NavEKF3: Use parameter to set baro ground effect dead-zone 2021-06-02 11:13:16 +09:00
Peter Barker c00f110f3d AP_NavEKF3: use DAL APIs for takeoff/touchdown expected 2021-06-02 11:13:16 +09:00
Paul Riseborough 53c4b163ce AP_NavEKF3: Allow adjustment of on ground not moving test sensitivity
Also re-tune default sensitivity based on user supplied logs with noisy gyro data.
2021-03-23 10:05:59 +11:00
murata c5b1c832ba AP_NavEKF3: Change misnomer (NFC) 2021-03-15 18:21:15 +11:00
Paul Riseborough 4675aea0bf AP_NavEKF3: Update parameter description 2021-03-05 12:10:01 +11:00
Paul Riseborough 6a603019d5 AP_NavEKF3: Add accessor function for yaw alignment status 2021-03-05 12:10:01 +11:00
Paul Riseborough 912db3512e AP_NavEKF3: Fix EKF selection bug 2021-03-05 12:10:01 +11:00
Paul Riseborough 9a5a264aa0 AP_NavEKF3: Improve wind estimation without airspeed sensing
Enable default airspeed variance to be specified externally
Improve control of sideslip fusion
Don't modify non wind states unnecessarily when using synthesised air data measurements
2021-03-05 12:10:01 +11:00
murata ae565aef1a AP_NavEKF3: Change misnomer (NFC) 2021-03-03 20:49:55 +11:00
Paul Riseborough 7370cd9f00 AP_NavEKF3: Fix typo and update parameter description 2021-02-22 13:21:03 +09:00
Randy Mackay f6cb0819ef AP_NavEKF3: pre_arm_check may skip position checks 2021-01-26 10:46:49 +11:00
Peter Barker 3582b69e9c AP_NavEKF3: remove getFilterTimeouts access methods 2021-01-22 13:04:36 +11:00
Peter Barker b3bacdd33c AP_NavEKF3: remove internal-only getTiltError method 2021-01-21 21:26:17 +11:00
Peter Barker 5ad0ac6727 AP_NavEKF3: remove unused getAccelNED method 2021-01-21 21:26:17 +11:00
Randy Mackay 4492e5024c AP_NavEKF3: enable ekf3 by default 2021-01-16 08:24:23 +09:00
Randy Mackay 27c998ad94 AP_NavEKF3: rename source and yawFusionMethod from EXTERNAL to GPS 2021-01-05 10:58:06 +11:00
Andrew Tridgell e747edbcf2 AP_NavEKF3: fixed init order for scheduler
this can impact replay of EKF2
2021-01-02 10:30:26 +11:00
Randy Mackay 39be85cef4 AP_NavEKF3: integrate Source loss of init 2020-12-21 16:56:38 +09:00
Dr.-Ing. Amilcar do Carmo Lucas f77ab30f7a Revert "AP_NavEKF3: Remove unsupported parameter unit descriptions"
This reverts commit 4f4a2f446d.
Makes more sense to add those to the list of supported units
2020-12-15 18:22:36 +11:00
Paul Riseborough ed17d8e48f AP_NavEKF3: Improve parameter display names 2020-12-11 15:21:41 +11:00
Andrew Tridgell b86c014400 AP_NavEKF3: rename drag parameters to start with EK3_DRAG_ 2020-12-11 15:21:41 +11:00
Andrew Tridgell be4d10a95e AP_NavEKF3: rework parameter handling
and fixed indentation
2020-12-11 15:21:41 +11:00
Paul Riseborough 0d2c235027 AP_NavEKF3: Fix #define typo 2020-12-11 15:21:41 +11:00
Paul Riseborough ab05e8ed4a AP_NavEKF3: Update param descriptions 2020-12-11 15:21:41 +11:00
Paul Riseborough 4f4a2f446d AP_NavEKF3: Remove unsupported parameter unit descriptions 2020-12-11 15:21:41 +11:00
Paul Riseborough c9ab4b18b0 AP_NavEKF3: Add multicopter wind estimation 2020-12-11 15:21:41 +11:00
Andrew Tridgell 80f7906744 AP_NavEKF3: removed inhibitGps and inhibitGpsVertVel options
these were unused
2020-12-01 10:33:50 +11:00
Randy Mackay 4cd1c3cfde AP_NavEKF3: param conversion loses config_error
config_error should only be run as part of setup because it may never return
2020-11-27 08:20:07 +09:00
Randy Mackay adfc92523b AP_NavEKF3: add configuredToUseGPSForPosXY 2020-11-25 21:00:07 +11:00
Andrew Tridgell 7eea13f86f AP_NavEKF3: fixed build of standalone replay link test
parameter conversion not needed for replay
2020-11-24 20:46:37 +11:00