Commit Graph

39 Commits

Author SHA1 Message Date
Peter Barker 79809b60aa AP_HAL_ChibiOS: rename f103-periph/hwdef.dat to .inc (f303 too) 2021-05-20 17:23:17 +10:00
Peter Barker 31ef6db937 AP_HAL_ChibiOS: remove redundant HAL_LOGGING_ENABLED from AP_Periph hwdefs 2021-05-19 17:38:47 +10:00
Peter Barker 7d8c5757d6 AP_HAL_ChibiOS: move from HAL_NO_LOGGING to HAL_LOGGING_ENABLED 2021-05-19 17:38:47 +10:00
Andy Piper f9c5f9be00 AP_HAL_ChibiOS: make dshot DMA unlock event driven in order to allow unlocking from rcout thread
refactor rcout into separate thread and process all dshot requests there
move uart DMA completion to event model
process dshot locks in strick reverse order when unlocking
convert Shared_DMA to use mutexes
move UART transmit to a thread-per-uart
do blocking UART DMA transactions
do blocking dshot DMA transactions
trim stack sizes
cancel dma transactions on dshot when timeout occurs
support contention stats on blocking locking
move thread supression into chibios_hwdef.py
invalidate DMA bounce buffer correctly
separate UART initialisation into two halves
cleanup UART transaction timeouts
add @SYS/uarts.txt
move half-duplex handling to TX thread
correct thread statistics after use of ExpandingString
set unbuffered TX thread priority owner + 1
correctly unlock serial_led_send()
don't share IMU RX on KakuteF7Mini
observe dshot pulse time more accurately.
set TRBUFF bit for UART DMA transfers
deal with UART DMA timeouts correctly
don't deadlock on reverse ordered DMA locks
change PORT_INT_REQUIRED_STACK to 128
2021-02-20 14:37:11 +11:00
Andrew Tridgell b289701d20 HAL_ChibiOS: removed SPI devices on f103-periph
these are unused and saves us a couple of k of flash
2020-12-03 15:50:50 +11:00
Andrew Tridgell cf22caa7ef HAL_ChibiOS: raise stack limits in f303 peripherals 2020-12-01 11:14:50 +11:00
Andrew Tridgell c778d14fd3 HAL_ChibiOS: enable stack checking on f303 boards 2020-12-01 11:14:50 +11:00
Andrew Tridgell 573cd6db6d HAL_ChibiOS: adjust MAIN_STACK for more ISR stack
we need more stack to deal with interrupt nesting between CAN, system
timer and serial interrupts
2020-12-01 11:14:50 +11:00
Siddharth Purohit 882c86c394 AP_HAL_ChibiOS: add app start offset to leave space for params 2020-09-24 12:32:19 +10:00
Siddharth Purohit 62df67a4b8 HAL_ChibiOS: hwdef: modify to use HAL CAN driver instead of ChibiOS's 2020-09-24 12:32:19 +10:00
Andrew Tridgell a5965d5a9e HAL_Chibios: removed unnecessary debug defines 2020-04-29 07:36:55 +10:00
Andrew Tridgell 32cdfddf12 HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
much easier to understand
2020-04-28 10:32:23 +10:00
Andrew Tridgell e8b2b52bae HAL_ChibiOS: removed STM32_VDD from hwdef.dat
use default
2020-04-28 10:32:23 +10:00
Andrew Tridgell d35fff5186 HAL_ChibiOS: set CS pins high while in bootloader
this appears to be the root cause of the parameter resets on
CubeOrange. We need to ensure the CS pin is not floating or random
noise on the SPI bus for FRAM can cause the FRAM to become corrupt
2020-03-11 09:53:06 +11:00
Andy Piper 3d0cf7e12a AP_HAL_ChibiOS: hardware M4-Cortex and M7-Cortex (and H7) implementation of HAL FFT abstraction
implements an FFT engine based on the betaflight feature using ARM hardware accelerated CMSIS library
make the FFT feature optional
add dynamic gyro windows
add quinns and candans estimators and record in DSP state
disable DSP for boards with limited flash
calculate power spectrum rather than amplitude
start/analyse version of analysis to support threading
allocate memory in a specific region
constrain window size by CPU class
control inclusion of DSP based on board size
2020-02-22 11:15:37 +11:00
Andrew Tridgell fdd2e93f7e HAL_ChibiOS: disable debug port on f103 to save memory 2019-11-09 17:11:32 +11:00
Andrew Tridgell 207dffba88 HAL_ChibiOS: moved compass support for f103-GPS
not needed for other builds
2019-11-01 10:53:53 +11:00
Andrew Tridgell 1d44718016 HAL_ChibiOS: added f303-periph and f303-GPS firmware 2019-11-01 10:53:53 +11:00
Andrew Tridgell 6f9fda5094 HAL_ChibiOS: removed CAN_APP_VERSION_MAJOR from hwdef.dat 2019-10-25 13:52:43 +11:00
Andrew Tridgell 49e669aa1f HAL_ChibiOS: support uncompressed bootloader on f103-periph
this allows update with very low memory
2019-10-24 22:03:43 +11:00
Andrew Tridgell cffb434de8 HAL_ChibiOS: tweak stack on f103-periph 2019-10-24 22:03:43 +11:00
Andrew Tridgell a3b61a1b02 HAL_ChibiOS: enable ROMFS for ZubaxGNSS and f103-periph
this allows for bootloader update
2019-10-24 22:03:43 +11:00
Andrew Tridgell f69be70772 HAL_ChibiOS: save some memory in f103-periph build 2019-10-22 17:51:24 +11:00
Andrew Tridgell 0a4576728e HAL_ChibiOS: support a app->bootloader comms region in SRAM
this allows for UAVCAN update without a 2nd BeginFirmwareUpdate call
2019-10-21 19:12:01 +11:00
Andrew Tridgell 5605ad6c59 HAL_ChibiOS: enable MissionPlanner compatible app descriptor 2019-10-21 19:12:01 +11:00
Andrew Tridgell 910129eafc HAL_ChibiOS: enable watchdog in AP_Periph firmwares 2019-10-21 19:12:01 +11:00
Andrew Tridgell 44f895ab16 HAL_ChibiOS: fixed for ZubaxGNSS build 2019-10-21 19:12:01 +11:00
Andrew Tridgell 3cd7dd9f12 HAL_ChibiOS: disable GPS and MAG in base f103 build
enable in f103-GPS
2019-10-21 19:12:01 +11:00
Andrew Tridgell 85271a8747 HAL_ChibiOS: split out f103-GPS from base f103-periph
this makes it easier to create more peripheral variants
2019-10-16 13:13:24 +11:00
Andrew Tridgell b7ae12a9d3 HAL_ChibiOS: reduce max compasses to 1 on AP_Periph 2019-10-16 08:58:52 +11:00
Andrew Tridgell 708ee47c03 HAL_ChibiOS: fixed f103 rm3100 2019-09-04 16:27:47 +10:00
Andrew Tridgell 3aa01448ff HAL_ChibiOS: use COMPASS specifier for f103-periph 2019-09-04 16:27:47 +10:00
Andrew Tridgell 97c56c068e HAL_ChibiOS: update board IDs for AP_Periph firmwares 2019-08-27 10:29:56 +10:00
Andrew Tridgell 64921b64f5 HAL_ChibiOS: enable sensors in peripheral firmwares 2019-08-27 10:29:56 +10:00
Andrew Tridgell c8806acaf5 HAL_ChibiOS: use AP_PERIPH env var 2019-08-27 10:29:56 +10:00
Andrew Tridgell 66ab585a24 HAL_ChibiOS: setup defaults for CAN app versions 2019-08-27 10:29:56 +10:00
Andrew Tridgell d711bed405 HAL_ChibiOS: set default node ID of 117
this allows for flight controllers without DNA support
2019-08-27 10:29:56 +10:00
Andrew Tridgell ababe1e81d HAL_ChibiOS: disable UART support in f103-periph bootloader 2019-08-27 10:29:56 +10:00
Andrew Tridgell 9a7b52fd15 HAL_ChibiOS: added hwdef.dat for f103-periph 2019-08-27 10:29:56 +10:00