Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
39,892 Commits 71 Branches 509 Tags 714 MiB
Commit Graph

168 Commits

Author SHA1 Message Date
Randy Mackay 87e6452ee9 Mission: bug fix when jump target is zero 
This would result in copter flying to a waypoint high above home
 2015-04-21 20:42:49 +09:00
Randy Mackay 888c2289ce Mission: support do-digicam-control parameters 2015-04-20 13:50:01 +09:00
Randy Mackay f6021010c5 Mission: support do-mount-control 2015-03-21 21:52:19 +09:00
Andrew Tridgell 3d433d2106 AP_Mission: loop check is only needed in one place 2015-01-23 13:48:45 +11:00
Andrew Tridgell 540cadc086 AP_Mission: prevent infinite loop with linked jump commands 
this prevents a "jump loop" from causing a firmware lockup. Thanks to
dellarb for reporting this!
 2015-01-23 13:14:27 +11:00
Andrew Tridgell ede920f293 AP_Mission: ensure location options are zero at start of mavlink conversion 2014-12-03 18:29:43 +11:00
Michael Day b3e693daa4 AP_Mission: Support MAV_CMD_DO_FENCE_ENABLE as a mission item. 2014-11-25 13:02:47 +11:00
Michael Day b36c1b2c3d AP_Mission: support for MAV_CMD_CONTINUE_AND_CHANGE_ALT 2014-11-25 10:43:15 +11:00
Michael Day 83c2f497a3 AP_Mission: Change jump_to_landing_sequence to get_landing_sequence_start 2014-10-24 21:42:06 +11:00
Andrew Tridgell 15a661e17a AP_Mission: fixed logic in jump_to_landing_sequence() 
see comments on drones-discuss
 2014-10-20 08:36:20 +11:00
Andrew Tridgell 8c6b875dcc AP_Mission: avoid the AP_AHRS cast 
get_position() is now const
 2014-10-20 08:36:20 +11:00
Michael Day ea91f4d47b AP_Mission: Added support for MAV_CMD_DO_LAND_START 2014-10-20 08:36:19 +11:00
Randy Mackay be1621877f Mission: support GUIDED_ENABLE and GUIDED_LIMITS 
This replaces the ardupilot only NAV_GUIDED command.
Also remove support for NAV_VELOCITY mission command which will be
replaced by SET_POSITION_TARGET non-mission command.
 2014-10-13 21:40:23 +09:00
Randy Mackay 5ca3c4baf6 Mission: fix CHANGE_ALT to store climb rate in lat param 
The slightly confusing storage of climb rate in the lat field led to a
bug fix a few months ago that actually created a bug.
 2014-09-26 23:23:04 +09:00
Randy Mackay 1ce8e453c2 Mission: add support for DO_GRIPPER 2014-09-17 21:14:17 +09:00
Andrew Tridgell effccacf46 AP_Mission: fixed acceptance radius outgoing 
this needs to match incoming
 2014-09-03 21:15:56 +10:00
Andrew Tridgell 3a5e960fe5 AP_Mission: revert APM_BUILD_TYPE change 2014-09-03 13:28:17 +10:00
Andrew Tridgell 36b854fa98 AP_Mission: fixed build for arduino IDE 2014-09-03 13:20:31 +10:00
Andrew Tridgell c4f84232e2 AP_Mission: make cmd.p1 be radius on plane for NAV_WAYPOINT 2014-09-03 12:38:30 +10:00
Randy Mackay d6aa868cac Mission: start next nav cmd immediately after prev completes 2014-08-27 18:05:49 +10:00
Andrew Tridgell 7a12ff0271 AP_Mission: convert to using StorageManager 2014-08-13 18:46:43 +10:00
Daniel Frenzel 1c7e8f8fb2 AP_Mission: Consecutive return, break, continue, goto or throw statements are unnecessary. 
Signed-off-by: Daniel Frenzel <dgdanielf@gmail.com>
 2014-08-11 09:24:26 +10:00
Andrew Tridgell df55ae86c4 AP_Mission: added last_change_time_ms() call 
will be used by terrain lib for scanning waypoints
 2014-08-06 17:59:19 +10:00
Randy Mackay 621cc2b953 Mission: bug fix to condition-change-alt 
Fix contributed by oniondream, thanks!
 2014-08-01 12:51:50 +09:00
Andrew Tridgell 34cbaa6f17 AP_Mission: added support for MAV_FRAME_GLOBAL_TERRAIN_ALT 2014-07-25 08:33:44 +10:00
Andrew Tridgell feaf9751cc AP_Mission: removed use of MAV_CMD_NAV_VELOCITY and MAV_CMD_NAV_GUIDED 2014-07-24 21:38:31 +10:00
Randy Mackay fe8a5be802 AP_Mission: support MAV_CMD_NAV_VELOCITY msg 2014-07-06 17:01:00 +09:00
Randy Mackay f4c9d58051 AP_Mission: add support for MAV_CMD_NAV_GUIDED 2014-07-06 17:00:26 +09:00
Randy Mackay 2f7dee3ba5 AP_Mission: squeeze loiter turns radius into high byte of p1 2014-06-17 20:53:50 +10:00
Andrew Tridgell f0df912a11 AP_Mission: added support for MAV_CMD_DO_INVERTED_FLIGHT 2014-06-05 15:44:18 +10:00
Randy Mackay 05f5164dfa Mission: rename AUTORESET to RESTART 2014-05-09 11:31:37 +09:00
Andrew Tridgell 818e500509 AP_Mission: improve the AP_Mission docs 
DisplayName isn't a description
 2014-04-29 11:46:06 +10:00
Andrew Chapman 782fbe1ec5 AP_Mission: added reset() function 2014-04-29 11:46:06 +10:00
Andrew Chapman a80e72ff82 AP_Mission: added MIS_AUTORESTART parameter 
- added MIS_AUTORESTART parameter, defaults to 0
- added start_or_resume() function to either start or resume a mission
based on that parameter value
 2014-04-29 11:46:06 +10:00
Randy Mackay d8f9a1c6c6 Mission: add support for MAV_CMD_DO_PARACHUTE 2014-04-07 13:36:55 +09:00
Andrew Tridgell cc212be41e AP_Mission: added get_next_ground_course_cd() API 
this gives the ground course of the next navigation leg, which can be
used to calculate the amount of steering required
 2014-04-07 09:29:54 +10:00
Andrew Tridgell 31082f4ce2 AP_Mission: fixed a bug re-entering AUTO 
this fixes a bug found by Marco where we would continue in CRUISE mode
with no waypoint if we re-entered AUTO after a mission reset
 2014-03-31 06:18:07 +11:00
Randy Mackay ac339a0289 Mission: add decoding of NAV_SPLINE command 2014-03-28 09:23:30 +09:00
Andrew Tridgell 0af35bd636 AP_Mission: fixed some compiler warnings 2014-03-24 12:52:27 +11:00
Andrew Tridgell 3bdc22d672 AP_Mission: make p1 16 bit 
this gives us a 16 bit value for extra data on a location, allowing
for an accurate angle in centi-degrees.

Also add validation of the size of the union arms in Content
 2014-03-20 16:57:09 +11:00
Randy Mackay c520cb789c Mission: cmd field types to match mavlink commands 
Split Set-Servo and Repeat-Servo command structures
Split Set-Relay and Repeat-Relay command structures
 2014-03-19 12:14:22 +09:00
Randy Mackay 37cff752c8 Mission: handle Loiter direction 
loiter-unlimited, loiter-turns and loiter-time cms specify the turn
direction in Param3.  This is stored in the location's loiter_ccw flag.
Previously supported only in Plane, moving here allows us to share more
code with Plane, Copter, Rover.
 2014-03-19 12:13:16 +09:00
Randy Mackay c75560218d Mission: command specific structures 2014-03-19 12:12:51 +09:00
Andrew Tridgell 3a6698f54b AP_Mission: fixed typo 2014-03-19 12:12:42 +09:00
Andrew Tridgell 3538621c48 AP_Mission: doc updates 2014-03-19 12:12:40 +09:00
Randy Mackay 48329c1bba Mission: bug fix for loading consecutive do-cmds 
The verify step was not being run for the 2nd consecutive do-command in
a mission list
 2014-03-19 12:12:37 +09:00
Randy Mackay 266a1ce9af Mission: bug fix set_current_cmd 
If mission had completed desired command index was ignored
 2014-03-19 12:12:27 +09:00
Andrew Tridgell 107cc2c126 AP_Mission: added truncate() function 
Used when loading a mission while flying

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2014-03-19 12:12:21 +09:00
Andrew Tridgell acdaf561c8 AP_Mission: fixed typo 2014-03-19 12:12:15 +09:00
Randy Mackay 9e07070d86 Mission: pass eeprom start into constructor 
This allows different storage locations for ArduCopter, Plane and Rover
 2014-03-19 12:11:53 +09:00
Randy Mackay ddc4cd4f18 Mission: add init and check_eeprom_version methods 2014-03-19 12:11:46 +09:00
Randy Mackay 4c0a31a9dc Mission: init home to zero before writing to eeprom 2014-03-19 12:11:37 +09:00
Randy Mackay 512b378c4a Mission: allow set_current_cmd when mission is not running 
Can now be run when mission is complete or stopped.  When mission is
resumed it will begin at the set command.  This command can be either a
nav or do command
 2014-03-19 12:11:10 +09:00
Andrew Tridgell eaf34bba9a AP_Mission: fixed reset using set mission item to 0 
this causes a mission reset
 2014-03-19 12:11:07 +09:00
Randy Mackay 8dd301b0c2 Mission: set_current_cmd to use uint16 2014-03-19 12:11:06 +09:00
Randy Mackay a6e422333e Mission: remove alt_in_cm from mavlink to cmd conversion 2014-03-19 12:11:01 +09:00
Randy Mackay 0dc3c9ab42 Mission: add p1 to command structure 
mavlink_to_mission_cmd method extended to support plane including adding
parameter to allow the alt to be expressed in cm or meters
 2014-03-19 12:10:45 +09:00
Randy Mackay 61cc5e6b72 Mission: add replace_cmd method 2014-03-19 12:10:40 +09:00
Randy Mackay 3cbbd4ebb9 Mission: add set current command method 2014-03-19 12:10:36 +09:00
Randy Mackay c7ffd2db90 Mission: reduce unnecessary search for do-commands 
do_cmd_all_done flag is set after all do-commands are complete
 2014-03-19 12:10:33 +09:00
Randy Mackay 0c92d60406 Mission: command index increase to int16 
Once more eeprom space is allocated this will allow more than 255
commands
 2014-03-19 12:10:31 +09:00
Randy Mackay 85b979ede9 Mission: support do-jump num_times is -1 
do-jump loops forever when num times is set to -1
 2014-03-19 12:10:29 +09:00
Randy Mackay f4d8ccc128 Mission: add mavlink to cmd conversion methods 2014-03-19 12:10:17 +09:00
Randy Mackay 87c7d19f83 AP_Mission: special handling for cmd 2014-03-19 12:10:14 +09:00
Randy Mackay e8db57ced3 AP_Mission: replace block read/write for eeprom 
Also reserve command #0 for home position
 2014-03-19 12:10:00 +09:00
Randy Mackay 84b3497a82 AP_Mission: fixes to protect against endless loops 2014-03-19 12:09:57 +09:00
Randy Mackay 6086bc14be AP_Mission: mostly working draft 2014-03-19 12:09:56 +09:00
Randy Mackay 4285eba297 AP_Mission: initial draft library 2014-03-19 12:09:54 +09:00