Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
36,840 Commits 71 Branches 509 Tags 756 MiB
Commit Graph

918 Commits

Author SHA1 Message Date
Andrew Tridgell 880a55c6a2 AP_InertialSensor: fixes for BMI088 on SPI 
The sensor has an unusual SPI interface, with a pad byte on read, and
retries needed on write
 2019-03-14 16:10:40 +11:00
L Kurt Shaw 8d75e8c5bb INS: AP_InertialSensor.cpp 
Fix typo in comments should be NFC
 2019-03-12 15:56:55 +09:00
Andrew Tridgell 81cd103073 AP_InertialSensor: probe for new v2 invensense IMUs 
also suppress LSM9DS0 whoami warnings, as these will now be common
with new IMUs

and make 20602 show up as a new devtype so we can distinguish it
 2019-03-11 12:40:21 +11:00
Andrew Tridgell dff3ea416c AP_InertialSensor: allow for LSM9DS0 to be used on I2C 2019-03-10 09:03:06 +11:00
Siddharth Purohit 086b4c1cfd AP_InertialSensor: use default value for temperature scale and offset 2019-03-06 20:47:10 +11:00
Siddharth Purohit b76ec8cc11 AP_InertialSensor: fix slave register structure for Invensensev2 2019-03-06 20:47:10 +11:00
Siddharth Purohit 528c0b4d7c AP_InertialSensor: add drivers for register bank based Invensense Sensors 2019-03-06 20:47:10 +11:00
Siddharth Purohit 0cfcd0986e AP_InertialSensor: look for icm20602 for Pixhawk 2 series flight boards 2019-03-06 20:47:10 +11:00
Andrew Tridgell 103af72859 AP_InertialSensor: remove more px4 remnants 2019-02-27 20:32:37 +11:00
Andrew Tridgell 2b285089e9 AP_InertialSensor: widen allowable temp gap on invensense IMUs 
some sensors have more temperature noise
 2019-02-26 16:18:26 +11:00
Andrew Tridgell 07e2167996 AP_InertialSensor: setup for fmuv6 2019-02-26 16:18:26 +11:00
Tom Pittenger 9347e6d36f AP_InertialSensor: unify singleton naming to _singleton and get_singleton() 2019-02-10 19:09:58 -07:00
Andrew Tridgell 6048c10a7c AP_InertialSensor: added driver for BMI088 
setup for 1600 Hz accel sample, 2kHz gyro sample, 24g accel range
 2019-01-31 12:05:57 -08:00
Andrew Tridgell 9520f5f768 AP_InertialSensor: removed F4Light 2019-01-21 21:57:21 +11:00
Peter Barker 6fc76a32af GLOBAL: use AP::logger() and strip redundant Log_ from methods 2019-01-18 18:08:20 +11:00
Peter Barker b47733142f GLOBAL: rename DataFlash_Class to AP_Logger 2019-01-18 18:08:20 +11:00
Peter Barker 43e3acc954 AP_InertialSensor: remove use of never-set AP_HAL_PX4 and AP_HAL_VRBRAIN 2019-01-18 09:53:44 +11:00
Peter Barker 43e47f33e4 AP_InertialSensor: remove PX4 backend 2019-01-17 06:41:33 +11:00
Andrew Tridgell a84af85689 AP_InertialSensor: support fast sampling in SITL 
this allows testing of fast sample logs for FFT
 2019-01-08 21:04:05 +11:00
Andrew Tridgell 512c50a6c4 AP_InertialSensor: use SIM_VIB_FREQ for SITL vibrations 
this allows for testing of FFT on logs
 2019-01-08 06:49:02 +11:00
Michael du Breuil 983356213a AP_InertialSensor: Remove unused parameter 2018-12-23 12:46:37 -08:00
Randy Mackay 6b3fa520b5 AP_InertialSensor: add range to POS param description 2018-12-13 20:14:01 +09:00
Andrew Tridgell 3de860f73b AP_InertialSensor: fixed orientation of 2nd OmnibusF7V2 IMU 2018-12-12 16:27:34 +11:00
Peter Barker 011c93f38e AP_InertialSensor: add override keyword 2018-11-08 11:30:12 +11:00
Andrew Tridgell 755dc8dc5d AP_InertialSensor: use WITH_SEMAPHORE() 
and removed usage of hal.util->new_semaphore()
 2018-10-17 12:54:22 +11:00
Michael du Breuil f51d757844 AP_InertialSensor: Remove unused (and conflicting in some builds) include 2018-10-02 07:09:41 +10:00
Peter Barker 04c36efdbf AP_InertialSensor: eliminate SITL float-equals issues 2018-08-28 09:54:47 +10:00
Michael du Breuil 1efad07a84 AP_InertialSensor: Remove unused ADC include 2018-07-17 09:29:50 +10:00
Andrew Tridgell 5f8b57ba19 AP_InertialSensor: added SITL device IDs 2018-07-13 10:19:01 +10:00
Lucas De Marchi 49d08ba72a Global: remove minlure 
Minlure is a port of ArduPilot to Minnow Board connected to daughter
board. Very few of those were produced and nobody is flying with it.

It served its purpose and all the the improvements to ArduPilot remain
regardless of it not being supported anymore. Now it's just adding
maintenance work with no clear benefit, so pull the plug.
 2018-06-26 07:32:08 -07:00
Patrick José Pereira 0c06bf89e5 AP_InertialSensor: Use SITL singleton 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2018-06-26 00:02:01 +01:00
Andrew Tridgell 89b8124560 AP_InertialSensor: added BMI055 IMU driver 2018-06-08 09:56:41 +10:00
Andrew Tridgell bfa66c9397 AP_InertialSensor: detect two IMUs on FMUv5 2018-06-06 07:15:41 +10:00
Francisco Ferreira 8b32960d3e AP_InertialSensor: remove Qualcomm board support 2018-05-17 09:57:20 +10:00
Peter Barker 1a640e3405 AP_InertialSensor: parameterise sensor-rate logging, generalise it 
AP_InertialSensor: add parameters for push-to-log interval and count

AP_InertialSensor: rename BAT_RAW to BAT_OPT

This becomes a bitmask of options for the BatchSampler

AP_InertialSensor: rename 'fast sample' to 'sensorrate sample'

AP_InertialSensor: const sensor-rate filter method

AP_InertialSampler: remove hard-coding of sample rate multiplier

AP_InertialSensor: use parameter to enable/disable sensor-rate logging

AP_InertialSensor: use a parameter to control sensor-rate logging

AP_InertialSensor: allow backends to override sensor data multiplier

e.g. some accelerometers are sensitive over wider ranges than the default 16G

AP_Inertialsensor: correct sample rate multiplier
 2018-05-01 09:35:29 +10:00
Andrew Tridgell 44131202cd AP_InertialSensor: 4kHz batch sampling 2018-05-01 09:35:29 +10:00
Jacob Walser ad4e928e7d AP_InertialSensor: add support for custom board orientations 2018-04-24 13:04:37 +01:00
Andrew Tridgell ca9d1a55fe AP_InertialSensor: support ICM-20689 IMU 
like the 20789, but without the baro
 2018-04-24 08:03:46 +10:00
Andrew Tridgell ea2dc9b831 AP_InertialSensor: added OMNIBUSF7V2 INS sensors 
a dual-IMU board
 2018-04-12 11:50:44 +10:00
Andrew Tridgell f788cde5c7 AP_InertialSensor: use multiply for fifo scale factors 
this fixes issue from #8118 too
 2018-04-10 14:17:16 +10:00
Peter Barker be634a893f AP_InertialSensor: remove unused ins error count logging 2018-04-04 14:21:20 +01:00
Peter Barker aca87ab638 AP_InertialSensor: remove pointless initialisations 
AP_InertialSensor: avoid pointless zeroing in constructor

AP_InertialSensor is either in bss or is created via new (which zeroes
memory)
 2018-04-04 12:14:02 +01:00
Peter Barker 2396a248ed AP_InertialSensor: use ahrs singleton for simple accelcal 2018-04-02 23:25:05 +01:00
Lucas De Marchi c4e8aeb105 AP_InertialSensor: remove linux-only include 
We already include AP_HAL.h that includes the platform-agnostic gpio
header, which is all that this driver needs. This is an alternative
fix to #7794.
 2018-03-09 11:12:31 -08:00
Andrew Tridgell 53b76efbd2 AP_InerialSensor: setup INT_PIN_CFG correctly 
this restores the behavior lost with the 20789 driver change
 2018-03-08 21:25:14 -08:00
Andrew Tridgell e8726865ab AP_InertialSensor: Correct scaling of batch data 2018-03-08 18:00:16 -08:00
Andrew Tridgell 455c0e25e1 AP_InertialSensor: allow for HAL_INS_NONE 2018-03-02 12:52:50 +11:00
Peter Barker 4288133ce0 AP_InertialSensor: correct compiler warning 
../../libraries/AP_InertialSensor/AP_InertialSensor_Invensense.h:108:14:
warning: private field '_error_count' is not used
[-Wunused-private-field]
    uint16_t _error_count;
 2018-03-02 09:26:37 +09:00
Andrew Tridgell b61caa9c57 AP_InertialSensor: added SP01 board type 2018-02-14 18:27:00 +11:00
Peter Barker 096f7367bf AP_InertialSensor: add ins() to AP:: namespace 2018-02-13 17:15:05 +11:00