Commit Graph

30518 Commits

Author SHA1 Message Date
Paul Riseborough
810f0fb95b AP_Airspeed: Add hysteresis to consistency check 2022-10-04 16:50:15 +09:00
Paul Riseborough
2cc2bf2a71 AP_TECS: Assume flight at cruise speed if speed measurement not available 2022-10-04 16:50:15 +09:00
Paul Riseborough
c6aeadd320 AP_Airspeed: Enable use of EKF3 to check airspeed health 2022-10-04 16:50:15 +09:00
Paul Riseborough
e45d68d2e8 AP_Logger: Fix ARSP data type string 2022-10-04 16:50:15 +09:00
Paul Riseborough
05046c1400 AP_Logger: Add consistency test ratio to ASPD logging 2022-10-04 16:50:15 +09:00
Paul Riseborough
24cb640321 AP_AHRS: Add accessor function for airspeed health monitoring 2022-10-04 16:50:15 +09:00
Paul Riseborough
2edf166252 AP_NavEKF3: Allow reporting of airspeed consistency for a deselected sensor 2022-10-04 16:50:15 +09:00
Paul Riseborough
85c1c98a59 AP_NavEKF3: Add accessor function for airspeed health monitoring 2022-10-04 16:50:15 +09:00
Paul Riseborough
47189d2c73 AP_NavEKF3: Enable monitoring of unhealthy airspeed sensors
Innovations and innovation test ratios will still be calculated and reported for an unhealthy sensor, but the EKF states wnd covariance matrix will not be modified.
2022-10-04 16:50:15 +09:00
Andy Piper
6a60f1a421 AP_RPM: fix reporting of RPM from the harmonic notch 2022-10-04 16:50:15 +09:00
Andrew Tridgell
76c0825136 AP_Motors: added a SPIN_MIN check
and check SPIN_ARM <= SPIN_MIN
2022-10-04 16:50:15 +09:00
Andrew Tridgell
fb28a26511 AP_BoardConfig: load CUAVv6X defaults when detected 2022-10-04 16:50:15 +09:00
Andrew Tridgell
394cdba297 AP_Param: make load_defaults_file() available on ChibiOS 2022-10-04 16:50:15 +09:00
Andrew Tridgell
a036d14a1e hwdef: added CUAV_V6X default parameters 2022-10-04 16:50:15 +09:00
Andrew Tridgell
57c873d304 AP_CANManager: disable SLCAN when armed
this disables SLCAN if enabled using CAN_SLCAN_CPORT and
SERIALn_PROTOCOL=22 when we are armed, to reduce load on the CAN
thread from the very inefficient SLCAN processing
2022-10-04 16:50:15 +09:00
Andrew Tridgell
5c7a2b6369 hwdef: reduced memory usage on MatekF405-CAN board 2022-10-04 16:50:15 +09:00
Andy Piper
2c82fb5f38 AP_HAL_ChibiOS: make sure SkystarsH7HD has functioning VTX on Camera 1 by default 2022-10-04 16:50:15 +09:00
Andy Piper
f345c21078 AP_HAL_ChibiOS: put RX on UART1 on Skystars H7HD bdshot
make sure VTX has power on Skystars H7HD at boot
2022-10-04 16:50:15 +09:00
Andy Piper
4be9377d54 AP_HAL_ChibiOS: hwdef for bdshot variant of SkystarsH7HD
Correct bootloader storage location for SkystarsH7HD
2022-10-04 16:50:15 +09:00
yaapu
191a44b471 ArduPlane: fixed roll and pitch for OSD VTOL view 2022-10-04 16:50:15 +09:00
Bob Long
43c06a1646 AP_Mission: initialize jump-tracking in init() 2022-10-04 16:50:15 +09:00
Peter Barker
57c6a93564 AP_Mission: zero frame field when filling mavlink_int from mavlink_cmd
Callers should be filling their bits in after calling this.
2022-10-04 16:50:15 +09:00
Andrew Tridgell
03c27c6626 AP_NavEKF3: fixed EKF3 origin alt inconsistency
always use common origin, and adjust output posD for difference
between public and local lane origin heights
2022-10-04 16:50:15 +09:00
Peter Barker
13b905cd00 AP_RPM: correct SITL backend compilation if RPM disabled in SITL 2022-10-04 16:50:15 +09:00
Andy Piper
709fc43032 AP_VideoTX: ensure that Tramp changes are broadcast to the GCS 2022-10-04 16:50:15 +09:00
Andy Piper
c5d5b0aedb AP_VideoTX: fix potential buffer overrun bug 2022-10-04 16:50:15 +09:00
Andy Piper
eaba8b7afb AP_VideoTX: add lookup tables for VTX power settings
correct settings when power set is received
add support for capturing all supported power levels
learn power levels in SmartAudio 2.1
add better support for VTX power levels
don't set power to 0 if in pitmode
add option for iNav compatibility
support non-conforming SmartAudio implementations
re-enable pitmode on SmartAudio 2.0
add support for "blind" VTX setting
2022-10-04 16:50:15 +09:00
Andrew Tridgell
59bfbbe6ae hwdef: rename board at request of vendor
there are multiple AtomRCF405 boards
2022-10-04 16:50:15 +09:00
Andrew Tridgell
a7dd59fc75 SITL: fixed tailsitter airspeed in RF9 2022-09-13 14:20:02 +09:00
Andrew Tridgell
e379aa359b AP_Scripting: added set_rpm_scale example 2022-09-13 14:20:02 +09:00
Andrew Tridgell
69b5ca8c07 AP_Scripting: added set_rpm_scale API 2022-09-13 14:20:02 +09:00
Andrew Tridgell
81c98e0038 AP_ESC_Telem: support set_rpm_scale() call for scripting 2022-09-13 14:20:02 +09:00
Iampete1
d066588c91 AC_Fence: always clear breaches 2022-09-12 08:57:42 +09:00
olliw42
64b1277a66 AP_Mount: storm integrates find_by_mavtype_and_compid
Note that this forces users to set their gimbal's component id while before any component id was acceptable
2022-09-12 08:44:38 +09:00
Randy Mackay
7c9b487779 AP_Mount: gremsy integrates find_by_mavtype_and_compid 2022-09-12 08:44:38 +09:00
olliw42
c034f8a099 GCS_MAVLink: add find_by_mavtype_and_compid 2022-09-12 08:44:38 +09:00
Iampete1
64d9413871 hwdef: Hitec-Airspeed: disable UART to save flash 2022-09-11 14:02:18 +10:00
Andrew Tridgell
a0530a4816 hwdef: fixed FlyingmoonF427 servo rail voltage 2022-09-11 08:29:12 +10:00
Andrew Tridgell
ee5fc4ad8e AP_Airspeed: use row_times_mat 2022-09-11 07:57:16 +10:00
Andrew Tridgell
0d7da89ef1 SITL: fixed rotation of airspeed in tailsitters in FlightAxis 2022-09-11 07:57:16 +10:00
Andrew Tridgell
5470c6435e AP_Math: rename * operator for vector3f * matrix3f 2022-09-11 07:57:16 +10:00
Michael du Breuil
5282dba42a GCS_MAVLink: Rate limit blocking accel calibrations
This allows us to drop any queued commands that may have arrived while
we were calibrating. Rather then entering a second and unexpected
calibration.
2022-09-09 08:52:14 +10:00
Andrew Tridgell
dd89d68107 hwdef: added AtomRC F405 board 2022-09-09 07:14:51 +10:00
Iampete1
f3dc805978 AP_Motors: Block Spoolup: stop advance from ground idle 2022-09-07 17:03:03 +01:00
Andy Piper
2de992dcf1 AP_ESC_Telem: avoid FPE on macos
use floats for rpm in API calls
2022-09-07 17:03:03 +01:00
Randy Mackay
ff91bbd762 AP_Motors: add spoolup block 2022-09-07 17:03:03 +01:00
Andy Piper
b9280630f5 AP_ESC_Telem: add are_motors_running() based on rpm feedback
add spin armed rpm to SITL
use floats for rpm in API calls
implement is_telemetry_active()
simulate ESC telemetry in SITL
2022-09-07 17:03:03 +01:00
Andy Piper
ab64480d2b SITL: add spin armed rpm 2022-09-07 17:03:03 +01:00
Iampete1
e72e5a2751 AP_Motors: add pre-arm check 2022-09-07 17:54:16 +10:00
Michael du Breuil
ff94ef1c60 GCS_MAVLink: Check for mission space before sending items 2022-09-07 17:52:23 +10:00
Randy Mackay
152ef7f78f AP_Mission: do-gimbal-manager-pitchyaw command supports multiple gimbals 2022-09-07 16:09:07 +09:00
Randy Mackay
f932add7ea AP_Mount: mav-cmd-do-gimbal-manager-pitchyaw supports multiple gimbals 2022-09-07 16:09:07 +09:00
Randy Mackay
73d817b985 AP_Mount: add access for primary instance 2022-09-07 16:09:07 +09:00
Randy Mackay
76096899ac AP_Mount: add 2nd instance 2022-09-07 16:09:07 +09:00
Michael du Breuil
0c73da5e79 AP_Logger: Strictly handle NACK/ACK
This is a change in bevaiour. The previous behaviour was to check for a
NACK, and if it wasn't a NACK it was assumed to be an ACK. This is a bad
assumption to let people get away with, because in the future if we ever
add other options to the enum we are more likely to have to cope with
bad implementation in the wild
2022-09-07 10:25:30 +10:00
Randy Mackay
93f62e5abe Tools: SilentWings param file MNT updates
These parameters have been renamed but they were always the defaults
2022-09-06 13:53:25 +09:00
Randy Mackay
c072a201bc AP_Mount: param conversion for MNT to MNT1 2022-09-06 13:53:25 +09:00
Randy Mackay
66a8775895 AP_Mount: remove param set of MNT1_TYPE to 1 if servo outputs defined 2022-09-06 13:53:25 +09:00
Randy Mackay
c20ec27c54 AP_Mount: parameter angles in degrees
Also MNTx_RC_RATE param per backend
2022-09-06 13:53:25 +09:00
Randy Mackay
ac769baa3c AP_Mount: Servo mount's STAB params replaced by BrushlessPWM type 2022-09-06 13:53:25 +09:00
Randy Mackay
0d9526f1c5 AP_Mount: replace RC input params with RC options 2022-09-06 13:53:25 +09:00
Randy Mackay
cc67d6f73c RC_Channel: define mount roll, pitch and yaw inputs 2022-09-06 13:53:25 +09:00
chobitsfan
43105249cb PrecLand: support LANDING_TARGET ext field 2022-09-06 12:10:21 +09:00
Andrew Tridgell
b7b02bd369 AP_Rangefinder: fixed out of range issue with benewake uart lidars
this impacts the TF03 180m lidar
2022-09-06 12:34:41 +10:00
Shiv Tyagi
7d3f013695 AR_PosControl: add accessor for reversed 2022-09-06 11:23:51 +09:00
Shiv Tyagi
d982c28ef2 AR_WPNav: add accessors for accel and jerk limits 2022-09-06 11:23:51 +09:00
Andrew Tridgell
e1c006c25d AP_Math: added double_to_int32 and double_to_uint32 2022-09-06 10:49:50 +10:00
Andrew Tridgell
3c232d1f67 SITL: fixes from --ubsan autotest 2022-09-06 10:49:50 +10:00
Andrew Tridgell
53997a284b AP_HAL_SITL: fixes from --ubsan autotest 2022-09-06 10:49:50 +10:00
Andrew Tridgell
b44a084a1e AP_Frsky_Telem: fixes from --ubsan autotest 2022-09-06 10:49:50 +10:00
Andrew Tridgell
c2b29a92c7 AP_ExternalAHRS: fixes from --ubsan autotest 2022-09-06 10:49:50 +10:00
Andrew Tridgell
286ea7499b AP_MSP: use BIT_IS_SET_64()
the bitmask is 64 bits wide
2022-09-06 10:49:50 +10:00
Andrew Tridgell
cda3fb6368 AP_Common: added BIT_IS_SET_64() 2022-09-06 10:49:50 +10:00
Andrew Tridgell
4ed55d9e21 Filter: fixed out of bound access in ModeFilter 2022-09-06 10:49:50 +10:00
Iampete1
60a75a0973 AP_Scripting: examaples move to : acsess 2022-09-06 10:39:35 +10:00
Iampete1
5b2236e88c AP_Scripting: Manual bindings: allow both : and . acsess 2022-09-06 10:39:35 +10:00
Henry Wurzburg
2c8c037b93 SRV_Channel:Correct metadata mistake in PR #21347 2022-09-06 10:35:14 +10:00
Willian Galvani
5ed2785dfa AP_HAL_Linux: create GPIO_Navigator 2022-09-06 09:34:07 +10:00
Willian Galvani
710cbacef7 RCOutput_PC9685: refactor write/write_gpio 2022-09-06 09:34:07 +10:00
Willian Galvani
603bc5ecce RCOutput_PCA9685: implement gpio methods 2022-09-06 09:34:07 +10:00
Willian Galvani
018ab14814 RC_Output.h: add gpio methods 2022-09-06 09:34:07 +10:00
Andy Piper
d82ba1b7a3 AP_HAL_ChibiOS: use faster SPI clock for BMI270 on MambaH743 and KakuteH7v2 2022-09-06 09:31:21 +10:00
Andy Piper
fcbaa0969e AP_InertialSensor: synchronize BMI70 on fifo reads 2022-09-06 09:31:21 +10:00
Henry Wurzburg
d31f6c2f57 AP_GPS: remove incorrect build option on GPS_DRV_OPTIONS param 2022-09-05 12:48:51 +10:00
AerofoxTech
b9b158216b hwdef: add AeroFox Airspeed periph 2022-09-05 12:36:11 +10:00
Andrew Tridgell
f8b1169165 HAL_ChibiOS: rename ecc_raw to apsec_data 2022-09-05 12:35:37 +10:00
Andrew Tridgell
36e9f9b7d1 AP_CheckFirmware: rename secure data to apsec_data 2022-09-05 12:35:37 +10:00
Andrew Tridgell
f899a47429 HAL_ChibiOS: removed debug msg 2022-09-05 12:35:37 +10:00
Andrew Tridgell
30ed94c73c hwdef: disable UARTS in MatekL431 bootloader
this saves a lot of flash, and UARTs are not needed in the
bootloader. It means we can fit a bootloader with signing for ESC
based RemoteID support
2022-09-05 12:35:37 +10:00
Andrew Tridgell
39595d36be AP_CheckFirmware: allow an unsigned bootloader to boot a signed firmware
this is important to provide an upgrade path for AP_Periph from
unsigned to signed. It means a bootloader with no public keys can
still check the board ID and CRCs of the signed firmware
2022-09-05 12:35:37 +10:00
Andrew Tridgell
bf511640cf AP_CheckFirmware: added check_signed_bootloader() 2022-09-05 12:35:37 +10:00
Andrew Tridgell
b79f3caf86 GCS_MAVLINK: report on unsigned bootloader flash attempt 2022-09-05 12:35:37 +10:00
Andrew Tridgell
b74c9b5862 HAL_ChibiOS: protect against flashing bootloader without public keys 2022-09-05 12:35:37 +10:00
Andrew Tridgell
a6c5e38c5a AP_HAL: added NOT_SIGNED error code 2022-09-05 12:35:37 +10:00
Andrew Tridgell
2c6418a920 AP_HAL: fixed linux build 2022-09-05 12:35:37 +10:00
Andrew Tridgell
1f4db8204b AP_CheckFirmware: support updating or removing public keys
this supports fetching, updating and removing public keys using the
SECURE_COMMAND mavlink operations. This will allow for vendors to
remotely hand over management of RemoteID security to new vendors
2022-09-05 12:35:37 +10:00
Andrew Tridgell
611f26f16c GCS_MAVLink: support SECURE_COMMAND 2022-09-05 12:35:37 +10:00
Andrew Tridgell
029947efc7 AP_CheckFirmware: allow for boot if no public keys
this will allow for SECURE_UPDATE command to unlock bootloader
2022-09-05 12:35:37 +10:00
Jeffrey Laut
3133aff352 SITL: fix simulated RC failure while receiving RC overrides 2022-09-02 12:08:34 +10:00
Peter Barker
b580c873a8 AP_IOMCU: log number of errors reading status page 2022-09-02 11:16:52 +10:00