Hwurzburg
|
9ab0d2e387
|
ArduPlane: add CRUISE mode RC AUX Function switch
|
2021-08-11 18:35:05 +10:00 |
Andrew Tridgell
|
d1d0ab41d6
|
Plane: added option to log PIDs at full rate
useful for tuning quadplanes
|
2021-08-10 10:13:36 +10:00 |
Peter Barker
|
5dab6b7275
|
Plane: remove pointless override of send_simstate
This is dangling after removing HIL stuff
|
2021-08-10 09:48:34 +10:00 |
Iampete1
|
a1ecd706b7
|
Plane: notify buzzer on every mode change
|
2021-08-10 09:47:33 +10:00 |
Leonard Hall
|
65b58dea85
|
Plane: fix PID filter names FILT -> FLTE, D_FILT -> FLTD
|
2021-08-10 08:33:56 +09:00 |
Peter Hall
|
ed4345cb3b
|
Quadplane: tailsitter: provide assistance at min throttle
|
2021-08-08 19:41:22 +10:00 |
Peter Hall
|
2527117cf9
|
Quadplane: combine assistance_needed and assistance_safe functions
|
2021-08-08 19:41:22 +10:00 |
Hwurzburg
|
80b4cd7ae9
|
ArduPlane: correct Mission Reset override behaviour in Plane
|
2021-08-06 10:17:25 +10:00 |
bugobliterator
|
c8b2f009fd
|
Plane: change class name from SITL::SITL to SITL::SIM
|
2021-08-05 07:25:31 +10:00 |
Tom Pittenger
|
7f9bbc9cfd
|
Plane: fix ADSB stall speed units. Was accidently using meter/s instead of cm/s
|
2021-08-04 07:08:24 -07:00 |
Samuel Tabor
|
23f6f38390
|
Plane: soaring: No action if in landing sequence.
|
2021-08-04 06:52:56 +10:00 |
Josh Henderson
|
66cd413473
|
ArduPlane: remove POSITION_TARGET_TYPEMASK_FORCE_SET
|
2021-08-03 12:48:38 +10:00 |
Iampete1
|
7ff592d29e
|
Plane: Quadplane: move mode functions to mode classes in-place
|
2021-08-03 12:28:31 +10:00 |
Iampete1
|
4a5e4f9c85
|
Plane: mode: add quadplane refences
|
2021-08-03 12:28:31 +10:00 |
Iampete1
|
a808d5c688
|
Plane: mode: add run and init methods
|
2021-08-03 12:28:31 +10:00 |
Iampete1
|
03d17437c3
|
Plane: mode_takeoff: call base mode constuctor
|
2021-08-03 12:28:31 +10:00 |
Peter Barker
|
435988a300
|
Plane: don't reset home on GPS startup on watchdog reset
|
2021-08-03 10:36:50 +10:00 |
Peter Barker
|
cfe25f71e3
|
ArduPlane: use mission singleton inside AP_AdvancedFailsafe
|
2021-08-03 10:35:24 +10:00 |
Andrew Tridgell
|
e7702a4216
|
Plane: mark log messages as streaming
|
2021-08-03 10:23:36 +10:00 |
Hwurzburg
|
1e4a6c9236
|
ArduPlane: Correct OSD horizon for VTOL modes and TRIM_PITCH_CD in Fixed Wing
|
2021-08-03 10:09:28 +10:00 |
Peter Barker
|
7e8f812909
|
Plane: don't allow motortest if motors not allocated
|
2021-08-02 10:24:49 +10:00 |
Andrew Tridgell
|
b037507c48
|
Plane: mark master as 4.2.0dev
|
2021-08-01 06:06:26 +10:00 |
Peter Barker
|
c348f602d9
|
ArduPlane: use AP::compass().available in place of enabled()
|
2021-07-30 12:19:42 +10:00 |
Peter Barker
|
85e8b362a7
|
ArduPlane: stop using AHRS as conduit for Compass pointer
|
2021-07-30 12:19:42 +10:00 |
Peter Barker
|
c1e263695f
|
Plane: remove unimplemented function declaration
|
2021-07-30 11:23:06 +10:00 |
Iampete1
|
f18428b357
|
Plane: #ifdef scripting specific functions
|
2021-07-28 18:18:32 +10:00 |
Hwurzburg
|
b539a534e9
|
Plane: improve description of Q_TRIM_PITCH
|
2021-07-27 12:49:33 +10:00 |
Iampete1
|
beefd95079
|
Plane: QuadPlane: tailsitter param conversion, set and use new enable param
|
2021-07-27 09:08:34 +10:00 |
Iampete1
|
0eab3faf32
|
Plane: use new tailsiter class
|
2021-07-27 09:08:34 +10:00 |
Iampete1
|
2bc2b9533b
|
Plane: QuadPlane: move tailsitter to class
|
2021-07-27 09:08:34 +10:00 |
Andrew Tridgell
|
716697f337
|
Plane: updated release notes for 4.1.0beta4
|
2021-07-25 18:31:48 +10:00 |
Andrew Tridgell
|
73952dfecb
|
Plane: update ATRP logging
|
2021-07-24 15:32:55 +10:00 |
Andrew Tridgell
|
f472da8e90
|
Plane: added ONESHOT_MASK parameter
after discussion with Paul on servo latency
|
2021-07-23 14:47:14 +10:00 |
Andrew Tridgell
|
1ae669bb01
|
Plane: added manual input expo for MANUAL, ACRO and TRAINING
this is easier than setting up mode specific expo in radios for flying
in manual modes
|
2021-07-23 14:47:14 +10:00 |
Andrew Tridgell
|
c0d942af4c
|
Plane: disable EKF3 default airspeed fusion by default
this fusion can cause problems with wind estimation, disable by
default for now
|
2021-07-22 18:20:45 +10:00 |
Andrew Tridgell
|
8e6abf5976
|
ArduPlane: replaced Pixhawk with more appropriate wording in docs
|
2021-07-22 07:48:12 +10:00 |
Peter Barker
|
06c2faaec5
|
ArduPlane: rename for AHRS restructuring
|
2021-07-21 21:01:39 +10:00 |
Peter Barker
|
e3b8fc6646
|
ArduPlane: remove ability to use DCM as AHRS
|
2021-07-21 21:01:39 +10:00 |
Peter Barker
|
354c1091f8
|
ArduPlane: stop taking references to ahrs in APM_Control
|
2021-07-21 18:27:23 +10:00 |
Hwurzburg
|
19213d3627
|
Plane: Allow yaw at zero throttle in VTOL descents
|
2021-07-20 11:10:25 +10:00 |
Iampete1
|
015b971ccb
|
Plane: add new dynamic mixer frame class
|
2021-07-20 09:19:28 +10:00 |
Andrew Tridgell
|
d41e400c86
|
Plane: added acro and training modes RC option
|
2021-07-20 09:00:46 +10:00 |
Peter Barker
|
93323f1f39
|
Plane: stop setting terrain singleton; libraries use singleton
|
2021-07-12 17:34:44 +10:00 |
Leonard Hall
|
7db568c85a
|
Plane: seperate kinimatic shaping from pid limit setting
|
2021-07-10 20:25:05 +09:00 |
WillyZehnder
|
0ce6157900
|
Plane: GCS_Plane.cpp Fix chronological sequence
to avoid inappropriate critical warning CRT:NoRCReceiver by ensuring the
call of plane.failsafe.last_valid_rc_ms before calling millis()
|
2021-07-07 18:56:09 +10:00 |
Peter Barker
|
5b7ec1fab4
|
Plane: do not run any prearm checks if we are armed or arming is not required
Co-authored-by: TunaLobster <unknown>
|
2021-07-07 18:20:54 +10:00 |
Stephen Dade
|
d6a123b58b
|
ArduPlane: Add support for HIGH_LATENCY2 messages
|
2021-07-07 17:10:05 +10:00 |
Hwurzburg
|
8dee32e64f
|
Plane: Add TX FF tuning for Pitch/Roll/Yaw QuadPlane PIDs
|
2021-07-06 09:00:16 +10:00 |
Andrew Tridgell
|
7ca0aa7c94
|
Plane: updated release notes for 4.1.0beta3
|
2021-07-05 16:24:04 +10:00 |
Andrew Tridgell
|
8482f9af27
|
Plane: fixed motor test with DShot VTOL motors
need to arm when running the motor test
|
2021-07-05 07:36:28 +10:00 |