Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
10,436 Commits 71 Branches 509 Tags 789 MiB
Commit Graph

813 Commits

Author SHA1 Message Date
Randy Mackay cbe56bba25 Copter: integrate AC_AttitudeControl 2014-02-15 05:27:32 +11:00
Randy Mackay 7b9a48107e Copter: move angle_max parameter to AP_Vehicle 2014-02-15 05:27:32 +11:00
Andrew Tridgell 0a3476bbf1 Copter: change to new board_voltage() API 2014-02-14 21:50:59 +11:00
Randy Mackay 2219f21744 Copter: add RC_FEEL_RP parameter 
Values from 0 ~ 100 control amount of filtering on roll and pitch input.
100 = no filter so crisp feel, 0 = a lot of filtering so very sluggish
response
 2014-02-12 16:28:41 +09:00
Randy Mackay 89b222f1cf Copter: only report gps glitch when usb disconnected 2014-02-11 11:43:24 +09:00
Randy Mackay 8f5585423c Copter: use ahrs trig values 2014-02-08 18:16:49 +09:00
Randy Mackay 5bcc2f5ca5 Copter: version to AC3.2-dev 2014-02-08 11:32:59 +09:00
Randy Mackay 5d929351ca Copter: removed unused servo3, servo4 from coax 2014-02-07 12:36:17 +09:00
Dneault f48e106271 Copter: add coax heli support 
Motors should be attached to RCOutputs 1 and 2, Flaps should be connected
to RC outputs 3 and 4
 2014-02-07 12:36:04 +09:00
Andrew Tridgell 5a3a7f1cec Copter: use new RC_Channels API 2014-02-06 10:17:16 +11:00
Randy Mackay a078d00e6a Copter: firmware to AC3.1.2-rc1 2014-01-30 14:00:20 +09:00
Randy Mackay 34f14a7c13 Copter: version to AC3.1.1-rc2 
This update applies to pixhawk only
 2014-01-21 21:23:11 +09:00
Andrew Tridgell e8b8cc1a5d Copter: converted to AP_ServoRelayEvents 2014-01-20 17:06:29 +11:00
Andrew Tridgell e3804e2846 Copter: fixes for AP_Relay API change 2014-01-20 17:06:29 +11:00
Andrew Tridgell 50a90a1043 Copter: enable AP_BoardConfig 2014-01-20 17:06:28 +11:00
Randy Mackay ae4f368f16 Copter: allow ch6 tuning of loiter speed 2014-01-15 15:22:52 +09:00
Randy Mackay dd5521aa06 Copter: update version to AC3.1.1-rc1 2014-01-14 21:01:54 +09:00
Andrew Tridgell 8a41b18a1f Copter: use uppercase names on SD card where possible 2014-01-14 12:46:26 +11:00
Randy Mackay df9d1614e2 Copter: remove PID logging 
Almost never used and eats up limited log description space
 2014-01-13 17:23:39 +09:00
Randy Mackay 9f2f44f0f6 Copter: integrate shrunken optflow 2014-01-09 12:31:53 +09:00
Randy Mackay 1793ee804e Copter: remove armed check before logging 2014-01-07 22:43:49 +09:00
Randy Mackay 99f851fc87 Copter: bugfix for starting in LOITER 
Loiter's Roll-Pitch mode was not being set on start-up.
 2013-12-30 17:18:10 +09:00
Andrew Tridgell 7c39d867bb Copter: use file based logs in SITL 2013-12-29 07:14:21 +11:00
Andrew Tridgell 97df2f64c9 Copter: use common available_memory() 2013-12-28 16:02:32 +11:00
Randy Mackay ab1bb6886c Copter: remove reference to COPTER_LEDS 2013-12-19 16:19:48 +09:00
Randy Mackay d362bb45fd Copter: move sensor init from setup(to init_ardupilot 
This fixes a bug in which the external led was not being disabled if the
EPM was enabled (they share pins).  The cause of the problem was the EPM
was being initialised before it's parameters had been loaded
 2013-12-19 14:12:19 +09:00
ctech4285 2b5d8aa5b7 Copter: integrate EPM library 2013-12-17 15:36:42 +09:00
Andrew Tridgell dd749c1de3 Copter: when using file logs use "logs" directory 2013-12-17 11:51:36 +11:00
Andrew Tridgell f37a2c979d Copter: don't need Log_Write_IMU2() now 2013-12-09 17:34:07 +11:00
Andrew Tridgell 0cacc7eaeb Copter: log both primary and secondary INS samples 2013-12-09 17:34:06 +11:00
Randy Mackay f8165c2864 Copter: ignore yaw input during radio failsafe 2013-12-06 13:50:07 +09:00
Randy Mackay 8fcbb7e59b Copter: OF_Loiter update control_roll and pitch 2013-12-02 11:58:59 +09:00
Randy Mackay ec65fd136d Copter: enable external leds 2013-11-30 22:54:13 +09:00
Randy Mackay 59cea4b88c Copter: remove CopterLED from main code 2013-11-30 18:20:55 +09:00
Randy Mackay a744658b47 Copter: combine nav_roll and control_roll 
Control_roll, control_pitch now always hold the desired lean angle
whether it be from the pilot or autopilot.
 2013-11-27 23:11:30 +09:00
Randy Mackay f08cc010ea Copter: firmware to ArduCopter V3.2-dev 2013-11-27 22:50:12 +09:00
Randy Mackay 7ef04bb73b Copter: rename nav_yaw to control_yaw 2013-11-27 22:48:20 +09:00
Randy Mackay 10d6a9a34e Copter: replace Log_Write_Motors with Log_Write_RCOU 2013-11-27 20:18:18 +09:00
Randy Mackay af657d58b9 Copter: RCIN dataflash logging 2013-11-27 16:46:25 +09:00
Andrew Tridgell a49710f20e Copter: added uartD support 
this also brings GCS_Mavlink.pde closer to the plane implementation
 2013-11-26 13:05:32 +11:00
Randy Mackay b8bfe008e1 Copter: run GPS glitch detection even when not armed 2013-11-22 21:46:32 +09:00
Randy Mackay 4e6d41bc8e Copter: remove unused gps_fix_count 2013-11-22 11:53:50 +09:00
Randy Mackay fe6ad3579c Copter: log GPS messages even when no fix 2013-11-22 11:51:48 +09:00
Randy Mackay 1a0f80ee64 Copter: AC3.1-rc7 version and release notes 2013-11-21 17:30:08 +09:00
Randy Mackay 24dc4391bb Copter: display pre-arm check failure reason every 30sec 2013-11-18 17:20:39 +09:00
Randy Mackay 321036b72e Copter: update contributors list 2013-11-16 12:10:38 +09:00
Randy Mackay 50f583f116 Copter: AC3.1-rc6 version and release notes 2013-11-16 11:35:01 +09:00
Randy Mackay 81fc24586e TradHeli: remove calls to get_manual_collective in auto throttle 
set_collective_for_landing method makes this unnecessary
 2013-11-15 22:58:36 +09:00
Randy Mackay c9c803ffd4 TradHeli: move STAB_COL_MIN to main parameter list 2013-11-15 22:58:32 +09:00
Randy Mackay 197fc67897 TradHeli: move pilot desired rotor speed to heli.pde 2013-11-15 22:58:24 +09:00