Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
4,781 Commits 71 Branches 509 Tags 716 MiB
Commit Graph

4781 Commits

Author SHA1 Message Date
Andrew Tridgell 1b099344a3 Rover: fixed build with new RC_Channel code 2012-08-08 12:11:05 +10:00
Andrew Tridgell a7b9aff79f AP_Baro: the DerivativeFilter now handles duplicate data 
this saves a few bytes of memory
 2012-08-08 12:07:36 +10:00
Andrew Tridgell 77f3b60b6f Filter: make the DerivativeFilter test GNUPlot friendly 
makes testing easier
 2012-08-08 12:07:36 +10:00
Andrew Tridgell 899eeb608b Filter: automatically cope with duplicate timestamps 
this makes it easier for callers to avoid excessive slope calculations

Thanks to Jon Challinger for the idea
 2012-08-08 12:07:35 +10:00
Jonathan Challinger 7815e3d810 APM: fixed rounding of altitude 
the cast was rounding to the nearest meter
 2012-08-08 12:07:35 +10:00
Andrew Tridgell d7d33c64b7 Filter: fixed a off-by-one DerivativeFilter bug 
many thanks to Jon Challinger for noticing this!
 2012-08-08 12:07:35 +10:00
rmackay9 f79b90725e ArduCopter: Dan Gray's fix for Condition_Yaw 
command_yaw_dir is an unsigned byte but was being set to a -ve number leading to very incorrect yaw target heading for counter clockwise turns.
command_yaw_end (i.e. turn's end target) was not being set if turn was of type "relative"
 2012-08-07 06:43:10 -07:00
Michael Oborne 45d21c7b5e Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2012-08-07 19:27:16 +08:00
Michael Oborne f90d4b7ead Mission Planner 1.2.4 
remove geofence tab
add guided alt remeber
change wp upload retry to 200 ms
 2012-08-07 19:26:10 +08:00
Amilcar Lucas d9f1140278 ArduCopter: Use generic channel names for AP_Mount servos. 
This simplifies mission planner, the same code can be used for plane and copter now.
 2012-08-06 23:33:51 +02:00
Amilcar Lucas e93daca17e Fix heli compilation 2012-08-06 23:30:02 +02:00
Michael Oborne f843b42e5b Mission Planner 1.2.3 
hud font move
add progress bar lock
add quickview mono fix
fix centi-degree/degree units
fix mnt config camera tab
fix some meters/feet scaling issues
 2012-08-06 22:22:57 +08:00
Amilcar Lucas 2c4a0636f3 AP_Mount: move mount to a "retracted position" into the fuselage with a fourth servo 2012-08-06 01:27:29 +02:00
Amilcar Lucas f14237126a Add me :) 2012-08-06 00:40:12 +02:00
Amilcar Lucas aa3cc63b15 ArduCopter: Make the code fit in a 1280 chip again 
Even allows to control a camera/antenna mount, if the user explicitly wants to.
 2012-08-06 00:23:48 +02:00
Amilcar Lucas 0106c133cf Default CLI_SLIDER_ENABLED to DISABLED 
Chris asked for this on the mailing list
 2012-08-06 00:22:33 +02:00
Amilcar Lucas af08b630cd Spellcheck in comments 2012-08-06 00:21:14 +02:00
Amilcar Lucas 107155fa1a AP_Mount: Allow using any RC channel to control any of the mount axes. 
This has the added benefit of saving 60 bytes and simplifying Mission Planner gui.
Moved some code from RC_Channel_aux to AP_Mount class
The servos get written by the update_mount_position() function, this simplifies main()
PS: The beauty of using libraries: I did not have to touch a single line of ArduPlane's code!
 2012-08-05 23:48:57 +02:00
Amilcar Lucas b8c7b8a786 RC_Channel: Allow each channel to know who they are, this simplifies the enabling and output function calls. 2012-08-05 23:08:31 +02:00
Amilcar Lucas afd96025a7 ArduCopter: Save more space in APM1280 2012-08-05 23:05:52 +02:00
Amilcar Lucas 9c1ac2d9e6 More work on ch9, 10 and 11 2012-08-04 19:44:41 +02:00
Amilcar Lucas 95f2af6d2d Implement set ROI 2012-08-04 18:44:29 +02:00
Amilcar Lucas 4ba847c449 The mount type must be updated periodically 2012-08-04 18:44:08 +02:00
Amilcar Lucas bbc4bdb729 More flexible RC support 2012-08-04 18:39:20 +02:00
Amilcar Lucas d29f7023cc Merge from ArduPlane 2012-08-04 18:38:50 +02:00
Amilcar Lucas 50b5d33745 Enable camera triggering by default 2012-08-04 16:32:47 +02:00
Amilcar Lucas 82b82283be ATmega1280 does not have enough memory for mount support so disable AUTO GPS support, to allow mount support to fit. 
This should almost have no side effects, because the most users use MTK anyways.
If the user defined a GPS protocol, than we will NOT overwrite it
 2012-08-04 16:32:20 +02:00
Michael Oborne 7a887bb27d Mission Planner 1.2.2 
add DegreeTracker
fix popout tab on config page
add remember last config tab
fix bytes send count
fix deactivate bug
fix ap_limits bug
fix ap_mount bug
 2012-08-02 18:04:54 +08:00
Michael Oborne e0e0fe0ce5 firmware build 2012-08-01 15:24:39 +08:00
Andrew Tridgell 301ab00c5b APM: added control switch debouncer 
this adds a switch debouncer, similar to the one used in
ArduCopter. I'm adding this after a flight on the weekend where noise
on the control mode channel caused a mode change away from auto.

To prevent this change adding excessive mode switch latency, it also
moves the reading of the control switch to the 10Hz loop, away from
the 3.3Hz loop. That gives us 0.2s delay in mode switch changes and
allows for spikes in the control mode for 0.1 seconds without changing
mode.
 2012-08-01 13:59:37 +10:00
rmackay9 c091c8e0e6 ArduCopter: bug fix to reset yaw target when zero and when in stabilize or acro mode. 2012-08-01 12:15:02 +09:00
rmackay9 176e6fdd68 ArduPlane: bug fix to global var_info parameter list for ahrs object. 2012-08-01 10:52:34 +09:00
rmackay9 a5b5f6a619 ArduCopter: bug fix to global var_info parameter list for ahrs object. 2012-08-01 10:52:27 +09:00
Andreas M. Antonopoulos 7262b0429a AP_Limits: experimental "bounce" mode. 2012-07-31 18:39:58 -07:00
Robert Lefebvre 4ffc5e211a Fixing Trad Heli Ext ESC Controller 
-Added ramp-down rate instead of instantly setting ramp to zero when throttle is dropped to bottom. This is to allow "warm-restart" if shutdown was unintentional.
-Actual ESC still goes to zero while throttle is dropped to the bottom, only the ramp counter winds down slowly behind the scenes.
 2012-07-31 17:47:25 -04:00
Andreas M. Antonopoulos de85442c36 AC2.7.1: Updated version and tag 2012-07-31 13:11:17 -07:00
Andrew Tridgell 0b49ac0ed0 APM: fixed overflow in geofence code for altitudes above 327 meters 2012-07-31 15:46:47 +10:00
Jason Short 8c47b0c087 ACM: Toy mode fix - Pitch flipped the sign on roll/Yaw coupling. 2012-07-30 15:43:05 -07:00
rmackay9 77b1785bc6 ArduCopter: reduce stabilize roll, pitch and rate yaw IMAX values 2012-07-30 11:01:45 +09:00
Michael Oborne 8001515b7e Mission Planner 1.2.1 
add enable/disable to mavlinkcheckbox
modify my button to curved
add delay to progress reporter dialog. to ensure correct parent
Fix Mount screen for AP
Fix Hardware screen Text
display roi difrently
modify HIL/Quad Hil
update dataflashlog format (thanks randy)
update mavcmd format for roi
 2012-07-30 07:23:42 +08:00
Andrew Tridgell cb61c3be96 APM: fixed case of 'LAND_PITCH_CD' 
mavlink parameters are uppercase by convention
 2012-07-29 17:07:38 +10:00
Michael Oborne e577b51e17 AC remove attitude hil unused extra (gps jump issue.) 2012-07-29 08:18:41 +08:00
rmackay9 5cb4a88292 ArduCopter: reset target yaw when throttle is zero (except if failsafe has been triggered) 2012-07-28 23:05:05 +09:00
rmackay9 06e35820e5 ArduPlane: allow MPU6000's DMP to be used for attitude estimation. 
Enable by adding this line to APM_Config.h:
#define DMP_ENABLED ENABLED
 2012-07-28 19:50:40 +09:00
rmackay9 5077674043 AP_InertialSensor_MPU6000: another attempt at fixing the SITL build 2012-07-28 17:19:19 +09:00
rmackay9 7683e9d870 AP_InertialSensor_MPU6000: changed DMP memory definition (dmpMem) to const uint8_t to remove SITL compile errors (hopefully) 
Removed unused 'dump' variable from dmp_load_mem to reduce compiler warnings
 2012-07-28 16:33:04 +09:00
rmackay9 3047084ed3 ArduCopter: added DMP_ENABLED to APM_Config.h to make it easier for people to enable it. 2012-07-28 16:31:38 +09:00
rmackay9 0eaf427062 AP_AHRS_MPU6000: cleaning up compiler warning due to unused yaw_deltat variable 2012-07-28 16:23:25 +09:00
rmackay9 670a66667f ArduCopter: fixed HIL build by removing ability to change _kp and _kp_yaw gains (used for accel and gyro sensor mixing) 2012-07-28 16:22:35 +09:00
rmackay9 48074f4766 AP_InertialSensor_Oilpan: changed initialisation order of parameters to remove compiler warning 2012-07-28 15:22:37 +09:00