Commit Graph

67 Commits

Author SHA1 Message Date
Lucas De Marchi d3ee998fa6 APMrover2: use separate header for version macro
Having the version macro in the config.h and consequently in the main
vehicle header means that whenever the version changes we need to
compiler the whole vehicle again. This would not be so bad if we weren't
also appending the git hash in the version. In this case, whenever we
commit to the repository we would need to recompile everything.

Move to a separate header that is include only by its users. Then
instead of compiling everything we will compile just a few files.
2016-05-06 13:11:28 -03:00
Lucas De Marchi dd8014dd2f APMrover2: replace header guard with pragma once 2016-03-16 18:40:44 +11:00
Dario Lindo Andres f731a0dc53 APMrover2: Added precise camera trigger logging
included update_trigger function
added camera trigger precise time mark
detect camera feedback pin status
added support for TRIGGER MSG
corrected according to defines.h
2016-01-29 09:19:43 +11:00
Lucas De Marchi 1a084e5dcd APMrover2: remove check for AVR CPUs
Remove the checks for HAL_CPU_CLASS > HAL_CPU_CLASS_16 and
HAL_CPU_CLASS >= HAL_CPU_CLASS_75. Corresponding dead code will be
removed on separate commits.
2015-11-04 12:14:14 +11:00
Lucas De Marchi 45ba94343d APMrover2: remove checks for HAL_BOARD_APM2 and HAL_BOARD_APM1 2015-11-04 12:14:13 +11:00
Andrew Tridgell eda187c75a Rover: fix for HAL_SITL rename 2015-05-05 09:45:57 +10:00
Andrew Tridgell e1b998f011 Rover: disable CLI on APM2 by default
saves lots of flash. This is also consistent with plane and copter
2015-03-13 22:52:56 +11:00
Víctor Mayoral Vilches 0795783d37 Rover: Update compass to the new interface 2015-03-13 18:46:17 +11:00
Randy Mackay 9f7f1e62df Rover: integrate SerialManager 2015-01-29 14:05:16 +11:00
Andrew Tridgell 35b558cfc2 Rover: convert to new AP_InertialSensor API 2014-10-24 12:10:38 +11:00
Matthias Badaire 874ef65d74 Plane: Add SERIAL2_PROTOCOL for GCS and FRSky telemtry
This allows selection of protocol type on telem2. The default is MAVLink, but can be selected as FrSky protocol
2014-07-29 17:08:20 -07:00
Andrew Tridgell 739edafb42 Rover: use HAL board subtypes 2014-07-14 09:44:35 +10:00
Emile Castelnuovo c5620dfd39 Rover: added VRBRAIN #defines and #includes 2014-04-08 16:19:20 +10:00
Andrew Tridgell f4079f57b2 Rover: convert to new GPS API 2014-04-01 06:38:24 +11:00
Andrew Tridgell 87ea98fe2c Rover: disable GPS2 in HIL 2014-02-27 08:16:11 +11:00
Andrew Tridgell 82ffc0ff2b Rover: support a 2nd GPS 2014-02-26 09:24:23 +11:00
Andrew Tridgell eac4b1ec96 Rover: fixed EKF usage for rover
added barometer object, and use shared home object from AHRS. This
gives basic EKF operation.
2014-02-24 09:25:50 +11:00
Andrew Tridgell 870ec8a9bb Rover: added RC in/out logging 2013-12-30 10:24:01 +11:00
Andrew Tridgell 24cf0a55ea Rover: added timestamps to logging and new STER logging
much more accurate logging for better analysis
2013-12-16 11:17:26 +11:00
Andrew Tridgell fe0e627304 Rover: changed SERIAL3_BAUD to SERIAL1_BAUD
and add SERIAL2_BAUD for systems that have it
2013-11-26 13:00:03 +11:00
Andrew Tridgell cae3d3b378 Rover: show git and firmware version in tlog 2013-11-09 10:09:20 +11:00
Andrew Tridgell 1e7af3e101 Rover: switched to L3G4200D driver for Linux 2013-10-08 11:50:54 +11:00
Randy Mackay 121e4932ea Rover: integrate BattMonitor 2013-10-03 11:16:29 +09:00
Andrew Tridgell 9679faae3b Rover: ported to Linux 2013-09-28 22:04:16 +10:00
Andrew Tridgell 20d1ddb5ba Rover: update for Stub -> HIL 2013-09-28 22:04:15 +10:00
Andrew Tridgell 3589c07d09 Rover: added support for the flymaple board 2013-09-24 13:51:28 +10:00
Andrew Tridgell 8f8711b137 Rover: removed SLIDE_SWITCH and PUSHBUTTON defines
not used anywhere
2013-09-23 18:10:22 +10:00
Andrew Tridgell 95c2e11b5a Rover: removed flash_leds() calls 2013-09-19 18:38:28 +10:00
Andrew Tridgell 481429de61 Rover: use new HAL usb_connected() function 2013-09-19 16:24:59 +10:00
Andrew Tridgell 5b88334dbb Rover: added full camera and mount support 2013-07-15 09:57:00 +10:00
Andrew Tridgell a5586ec394 Rover: enable RELAY_* parameters 2013-06-25 12:48:58 +10:00
Andrew Tridgell feb539bade Rover: fixed HIL operation
only HIL sensors - removed HIL_MODE_ATTITUDE as it didn't exercise
enough of the code
2013-06-04 11:57:59 +10:00
Andrew Tridgell 44dd9ddf74 Rover: updates for new compass API 2013-05-02 12:48:14 +10:00
Bill Bonney 14eca30456 Rover: Enable CURRENT logging by default to dataflash 2013-04-21 07:24:16 +10:00
Andrew Tridgell 7717cc1450 Rover: added compass logging 2013-04-20 13:52:36 +10:00
Andrew Tridgell a8d6fa3107 Rover: fixed dataflash logs to be useful
added sonar and fixed other messages
2013-04-19 10:23:57 +10:00
Andrew Tridgell bb14672dab Rover: fixed PX4 MPU6000 driver for rover 2013-03-16 19:47:09 +11:00
Andrew Tridgell 06dd6c2790 Rover: always build sonar code
can use enabled/disabled parameter for runtime control
2013-03-01 07:18:25 +11:00
Andrew Tridgell bf6198be40 Rover: tweaked parameters and added SPEED_TURN_GAIN and SPEED_TURN_DIST 2013-02-22 08:38:13 +11:00
Andrew Tridgell 06ccf8495b Rover: default magnetometer to enabled
will be disabled by auto-detect code if not attached
2013-02-22 07:14:38 +11:00
Andrew Tridgell 7e4d4b07c3 Rover: change PX4 main baud rate back to 115200
we now use USB console
2013-02-22 07:03:52 +11:00
Andrew Tridgell f1ff27ed08 Rover: major restructuring
this removes a lot of the old arduplane code, and renames a lot of
variables.

This will need a lot more testing and fixup before being usable
2013-02-08 09:21:22 +11:00
Randy Mackay bb21194fd7 Rover: CUR and CURR renamed to CURRENT in dataflash
Based on user complaint re inconsistency of disabling/enabling and
output in dataflash
2013-01-26 17:41:38 +09:00
Randy Mackay 7bfe659626 Rover: rename RAW dataflash message to IMU 2013-01-26 17:35:18 +09:00
Andrew Tridgell 0b03df4e69 Rover: run serial0 at 57600 on PX4 2013-01-22 09:50:12 +11:00
Andrew Tridgell 583ec2b236 Rover: fixed PX4 mag orientation 2013-01-17 17:23:34 +11:00
Andrew Tridgell ef35aa63ce Rover: port rover code to PX4 2013-01-02 22:14:35 +11:00
Andrew Tridgell fc953588e1 Rover: allow rover to build on APM1-1280 2012-12-22 13:21:34 +11:00
Andrew Tridgell 45615e5698 Rover: merge in mavlink updates from ArduPlane 2012-12-20 14:52:35 +11:00
Andrew Tridgell 235369cfbc Rover: cleanup board config 2012-12-20 14:52:35 +11:00