Robert Lefebvre
73bafa131e
AP_MotorsHeli: Overload output()
...
To protect it from future interference from Multirotor code.
2015-05-22 09:38:23 +09:00
Robert Lefebvre
d3ce68a8ca
AP_MotorsHeli: Overload update_throttle_filter()
...
Do not reset filter to zero when disarmed to allow collective pitch servo movement.
2015-05-22 09:38:20 +09:00
Randy Mackay
3d9a6a69e2
MotorsHeli: COLYAW to float
2015-05-08 14:14:36 +09:00
Randy Mackay
edfa206bb8
Motors_Heli: nest heli params
2015-05-08 14:14:35 +09:00
Randy Mackay
68b05a4ca2
AP_Motors: is_throttle_mix_min returns bol
2015-05-08 14:14:32 +09:00
Leonard Hall
0f894ac1a8
AP_Motors: Rename and move Throttle Mix / Comp
2015-05-08 14:14:17 +09:00
Andrew Tridgell
2e57c62ebb
AP_Motors: fix for HAL_SITL rename
2015-05-05 09:45:55 +10:00
Randy Mackay
b223e90ef6
AP_Motors: fix example sketches
2015-05-01 20:58:20 +09:00
Randy Mackay
0acc06d713
AP_Motors: minor comment for interlock
2015-05-01 14:30:45 +09:00
Robert Lefebvre
1a482de5e2
AP_MotorsHeli: Overload output_armed_zero_throttle
2015-05-01 14:30:25 +09:00
Robert Lefebvre
6bdace30d2
AP_Motors: Add throttle interlock functionality
...
AP_MotorsMatrix's output_armed_zero_throttle uses output_min default from base class
2015-05-01 14:30:24 +09:00
Jonathan Challinger
348001e786
AP_Motors: add get_throttle_warn function
2015-05-01 12:56:11 +09:00
Randy Mackay
bae1722946
AP_Motors: get_compensation_gain gets div-by-zero check
2015-04-29 14:36:22 +09:00
Jonathan Challinger
41ae7207c7
AP_Motors: scale roll/pitch/yaw gain for air density
2015-04-29 14:36:15 +09:00
Jonathan Challinger
e2ba351149
AP_Motors: refactor apply_thrust_curve_and_volt_scaling
2015-04-29 14:36:12 +09:00
Jonathan Challinger
a07b322d31
AP_Motors: set_throttle takes a float
2015-04-24 16:30:45 +09:00
Tom Pittenger
a5ffadf201
AP_Motors: fix compile warnings re float constants
2015-04-24 14:04:00 +09:00
Jonathan Challinger
4993fd4d71
AP_Motors: use new lowpass filter
2015-04-17 10:46:47 +09:00
Jonathan Challinger
e80776f1f5
AP_Motors: remove MOT_THR_FILT parameter and add interface to configure filter
2015-04-16 21:00:01 +09:00
Jonathan Challinger
8e442675a7
AP_Motors: introduce set_stabilize(bool), specifies whether torque demands should be output
2015-04-16 20:59:40 +09:00
Jonathan Challinger
bc2afb31dd
AP_Motors: virtual not necessary in child class
2015-04-16 20:59:37 +09:00
Jonathan Challinger
a2c69fe90d
AP_Motors: add optional motor output throttle filter
2015-04-16 20:59:31 +09:00
Leonard Hall
88be3d67e7
AP_Motors: add get for throttle comp
2015-04-16 13:29:50 +09:00
Leonard Hall
791fbcf9b3
AP_Motors_Class: time constants of throttle comp
2015-04-16 13:29:46 +09:00
Andrzej Zaborowski
132cdc4916
Motors: Use _motor_to_channel_map in tricopter consistently.
...
In AP_MotorsTri.cpp the AP_MOTORS_MOT_1, _2 and _4 constants are
always mapped to actual output channels through _motor_to_channel_map
while the _CH_TRI_YAW is not, but there were a few inconsistencies
in this that could lead to things like PWM min and max values being
set on wrong channels.
It looks like all in all _motor_to_channel_map being in PROGMEM
probably doesn't help save memory and I'm not sure how useful it is
in the first place but regardless the usage should be consistent.
2015-04-09 11:43:22 +09:00
Jonathan Challinger
1828515b3b
AP_Motors: bug fix to _batt_voltage_filt
2015-04-01 10:15:06 -07:00
Jonathan Challinger
89cdd02f58
AP_Motors: remove duplicate get_throttle function
2015-04-01 10:15:05 -07:00
Jonathan Challinger
0e53c0a892
AP_Motors: make output_armed() and output_disarmed() pure virtual
2015-04-01 10:14:38 -07:00
Randy Mackay
385b3744ea
MotorTri: check servo_out above min_throttle
2015-03-16 14:49:38 +09:00
Randy Mackay
f9e29a7f77
MotorSingle: check servo_out above min_throttle
...
We need to recalc radio_out or the motors could fall below min throttle
2015-03-16 14:49:37 +09:00
Randy Mackay
8de5d16f96
MotorCoax: check servo_out above min_throttle
...
We need to recalc radio_out or the motors could fall below min throttle
2015-03-16 14:49:35 +09:00
Leonard Hall
31a55b2bd6
MotorsMatrix: fix div by zero by ensuring throttle is above min
2015-03-16 14:49:31 +09:00
Randy Mackay
5e26450a6f
AP_Motors: make THR_LOW_COMP a variable instead of param
2015-03-10 12:20:27 +09:00
Leonard Hall
007c96a3d8
AP_Motors: Low throttle compensation setters
2015-03-10 12:20:21 +09:00
Leonard Hall
6275ee0289
AP_Motors: Check for battery voltage reading fail
2015-03-10 12:20:19 +09:00
Leonard Hall
3ad9b1a06b
AP_MotorsMatrix: remove incorrect throttle limit flag
2015-03-06 14:02:55 +09:00
Jonathan Challinger
d148039f65
AP_Motors: stricter batt_voltage misconfiguration check
2015-03-06 14:02:49 +09:00
Leonard Hall
11a19803e0
Motors: add accessors for motor logging
...
accessor include get_roll, get_pitch, get_yaw, throttle input
2015-03-06 14:01:58 +09:00
Randy Mackay
f5f7cd540f
Motors: fix example sketches
2015-03-03 21:39:24 +09:00
Leonard Hall
cf8c211c35
Motors: fix thrust curve and add constraint
2015-03-03 15:49:07 +09:00
Leonard Hall
3e960dfc3b
Motors: add get_voltage_comp_gain
...
This clarifies that lift_max is the inverse of the battery voltage gain
compensation
2015-03-03 15:49:04 +09:00
Leonard Hall
997c6f0868
Motors: move battery resistance calcs to parent
...
Moving from MotorsMatrix to parent Motors class allows these to be used
from other frame types
Also initialise battery resistance
2015-03-03 15:49:02 +09:00
Randy Mackay
09d7cdbc23
Motors: batt_voltage_filt becomes filter object
2015-03-03 15:49:00 +09:00
Leonard Hall
529c6fed3a
Motors: move over current throttle limiting to parent
...
Moving from MotorsMatrix to parent Motors class allows this to be used
from other frame types
2015-03-03 15:48:54 +09:00
Randy Mackay
812473fd9a
MotorsMatrix: use get_hover_throttle_as_pwm
2015-03-03 15:48:52 +09:00
Randy Mackay
1a9d3125ef
Motors: _hover_out to pct * 10 instead of pwm
2015-03-03 15:48:50 +09:00
Leonard Hall
6b7bdf64bd
Motors: move batt voltage lift_max calcs to parent
...
Moving from MotorsMatrix to parent Motors class allows them to be used
by other frame types
Also added sanity check of batt_voltage_min
2015-03-03 15:48:48 +09:00
Randy Mackay
c549b58eb7
MotorsMatrix: remove check of throttle_curve_enabled
2015-03-03 15:48:46 +09:00
Randy Mackay
5fb3de48ee
MotorsTri, Single, Coax: use new thrust curve
2015-03-03 15:48:44 +09:00
Randy Mackay
2eaa4a8445
Motors: remove old throttle curve
2015-03-03 15:48:42 +09:00
Leonard Hall
751dbb7df7
Motors: move thrust curve and volt scaling to parent
...
Moving from MotorsMatrix to Motors allows it to be used from other frames
2015-03-03 15:48:41 +09:00
Randy Mackay
80b498f598
Motors: add loop_rate to test sketch
2015-03-03 15:48:39 +09:00
Randy Mackay
7ab76dbd0e
Motors: add loop_rate to constructor for all frames
2015-03-03 15:48:34 +09:00
Randy Mackay
77d4b3a2ae
Motors: add loop_rate to constructor
2015-03-03 15:48:32 +09:00
Leonard Hall
ec9d7dd99e
Motors: minor comment fixes
2015-03-03 15:48:30 +09:00
Leonard Hall
1d0ee68116
Motors: over current throttle limiting
2015-03-03 15:48:28 +09:00
Randy Mackay
f6523c0997
Motors: Add THR_LOW_CMP to adjust low throttle inputs affect on attitude control
2015-03-03 15:48:21 +09:00
Leonard Hall
83e3e2fec2
Motors: thrust curve and voltage scaling for matrix supported frames
2015-03-03 15:48:19 +09:00
Leonard Hall
5b0bd49ff2
Motors: configurable yaw headroom for matrix frames
2015-03-03 15:48:15 +09:00
Randy Mackay
3550e52560
MotorsTri: add 80% throttle limit
...
This limit was moved from the main copter flight code to the motors
library in order that the throttle_upper flag could be set properly.
2015-02-02 22:31:06 +09:00
Randy Mackay
38702a7e23
Motors: fix example sketch
2015-01-28 17:15:45 +09:00
Robert Lefebvre
a2958e2ffd
AP_MotorsSingle: Fix parameter comments.
2014-11-08 10:18:03 +09:00
Randy Mackay
677f6cce7f
AP_Motors: reduce slow-start increment for fast CPUs
2014-10-18 20:54:08 +09:00
Randy Mackay
6690aff305
AC_Motors: param description addition
2014-10-14 12:43:22 +09:00
Randy Mackay
793ed20534
CoaxCopter: set throttle upper and lower flags
2014-10-04 23:49:19 +09:00
Randy Mackay
57f6d0ff60
SingleCopter: set throttle upper and lower flags
2014-10-04 23:49:16 +09:00
Randy Mackay
85fb4b122a
MotorsMatrix: _min_throttle interpreted as 0 ~ 1000 range for throttle_lower flag
...
Also trigger throttle_upper flag when throttle in reaches 1000
2014-10-04 23:49:14 +09:00
Randy Mackay
91e5201439
Tri: _min_throttle interpreted as 0~1000 range for throttle_lower flag
...
limit.throttle_lower flag becomes true when the throttle passed into the
motors lib (which is in the 0 ~ 1000 range) is below _min throttle.
This makes the interpretation of the THR_MIN parameter consistent
between the main code (which uses 0 ~ 1000 range) and the motors lib
(which previously used the RC3_MIN ~ RC3_MAX range).
The remaining problem however is that the output of the motors continues
to use THR_MIN as if it were a pwm. I don't believe this is a dangerous
problem however.
2014-10-04 23:49:11 +09:00
Jason Short
b57539a9ad
AP_Motors: throttle_pass_through accepts pwm
2014-09-19 22:21:45 +09:00
NullVoxPopuli
c672b3e324
Copter: Added support for V-Shaped and A-Shaped VTail Quadcopter frames
...
Signed-off-by: NullVoxPopuli <LPSego3+dev@gmail.com>
2014-08-18 14:31:01 +09:00
Randy Mackay
9b9f6cd47a
AC_MotorsHeli: init member to resolve compiler warning
2014-08-14 11:27:33 +09:00
Andrew Tridgell
2e83555892
AP_Motors: fixed example build
2014-08-13 21:48:35 +10:00
Randy Mackay
5596001d39
AC_Motors: make get_throttle_out const
2014-08-04 21:04:09 +09:00
Randy Mackay
b665ebd7a0
MotorsMatrix: implement get_motor_mask
2014-07-26 16:33:24 +09:00
Randy Mackay
d73605ece8
MotorsCoax: implement get_motor_mask
2014-07-26 16:33:22 +09:00
Randy Mackay
72c3e9cc72
TradHeli: implement get_motor_mask
2014-07-26 16:33:20 +09:00
Randy Mackay
6d99524e56
MotorsSingle: implement get_motor_mask
2014-07-26 16:33:18 +09:00
Randy Mackay
6ae855c1cf
MotorsTri: implement get_motor_mask
2014-07-26 16:33:16 +09:00
Randy Mackay
7749bfe82c
Motors: add get_motor_mask method
...
This returns a bitmask of output channels that are used by the motors
library. This allows removing the chance of a do-set-servo interfering
with a motor or control surface used to control the vehicle.
2014-07-26 16:33:14 +09:00
Andrew Tridgell
d9f20c6785
AP_Motors: fixed example build
2014-07-25 17:54:51 +10:00
Randy Mackay
517732a34d
AP_Motors: add get_throttle_out accessor
2014-07-18 11:39:27 +09:00
Andrew Tridgell
e448168ba6
AP_Motors: fixed example build
2014-07-14 10:41:16 +10:00
bugobliterator
e6f27c9fac
AP_Motors_Time_test.pde: use hal.scheduler->micros instead of gettimeofday
2014-07-14 09:31:59 +10:00
bugobliterator
fb7ca9bb3c
AP_Motors:add AP_Motors_Time_test
2014-07-14 09:29:45 +10:00
Víctor Mayoral Vilches
d43c1cc544
AP_Motors_test: Adapt to test bench available
2014-07-14 09:29:08 +10:00
Robert Lefebvre
92bdf24dba
AP_MotorsHeli: Add To-Do. Swash setup hasn't seemed to work right for a while, this might be why. Confirm later.
2014-07-13 17:11:22 +09:00
Robert Lefebvre
789b1018fc
AP_MotorsHeli: Change set_delta_phase_angle so that it forces recalculation of collective factors.
2014-07-08 20:18:39 +09:00
Robert Lefebvre
fd542e99d8
AP_MotorsHeli: Create Delta Phase Angle variable and method to set. Will be used by CCComp code.
2014-07-08 20:18:34 +09:00
Robert Lefebvre
0680b88abd
AP_MotorsHeli: Add main loop rate time variable and method. Change RSC increment calc to account for loop rate time.
2014-07-08 20:18:20 +09:00
Robert Lefebvre
979abb9fbd
TradHeli: Cause DDVP Tail Motor to stop immediately when Ch8 is 0.
2014-07-08 20:18:02 +09:00
Randy Mackay
5cc26569fc
AP_Motors: fix example sketch
2014-04-29 20:46:34 +09:00
Randy Mackay
2be99d7a92
TriCopter: output_test for individual motors
...
Based on original work by Nils Hogberg
2014-04-29 11:41:16 +09:00
Randy Mackay
07766e55f9
SingleCopter: output_test for individual motors
...
Based on original work by Nils Hogberg
2014-04-29 11:41:14 +09:00
Randy Mackay
3610cfe24c
TradHeli: output_test for individual motors
...
Based on original work by Nils Hogberg
2014-04-29 11:41:13 +09:00
Randy Mackay
8f74f5b3b0
CoaxCopter: output_test for individual motors
...
Based on original work by Nils Hogberg
2014-04-29 11:41:12 +09:00
Randy Mackay
d63d82ec17
MotorMatrix: output_test for individual motors
...
Based on original work by Nils Hogberg
2014-04-29 11:41:10 +09:00
Vizual54
11d02ea5d2
AP_Motors: output_test for individual motors
...
Modified and integrated by Randy Mackay
2014-04-29 11:36:58 +09:00
L. Preston Sego III
3ecdc4b741
Copter: Add support for V-Tail Quads
2014-04-14 14:54:02 +09:00
Randy Mackay
b78e59ea30
AP_Motors: add stability patch test to example sketch
2014-04-09 21:21:29 +09:00
Jonathan Challinger
9959a44453
AP_Motors: properly constrain thr_adj_max
2014-04-07 14:14:32 +09:00
Andrew Tridgell
efdb678e00
AP_Motors: fixed example build
2014-04-07 11:55:56 +10:00
Andrew Tridgell
866e32f059
AP_Motors: removed unused variable
2014-02-26 09:40:39 +11:00
Randy Mackay
d761ddd4af
AP_Motors: fix example sketch
2014-02-15 06:09:08 +11:00
Randy Mackay
8d6eb1eceb
MotorsMatrix: motor_to_channel_map moved to progmem
2014-02-15 05:27:50 +11:00
Randy Mackay
134289af38
TradHeli: motor_to_channel_map moved to progmem
2014-02-15 05:27:50 +11:00
Randy Mackay
1bee56877c
CoaxCopter: motor_to_channel_map moved to progmem
2014-02-15 05:27:50 +11:00
Randy Mackay
3fad8e3630
SingleCopter: motor_to_channel_map moved to progmem
2014-02-15 05:27:50 +11:00
Randy Mackay
0edf039155
AP_MotorsTri: motor_to_channel_map moved to progmem
2014-02-15 05:27:50 +11:00
Randy Mackay
96d433c63e
AP_Motors: motor_to_channel_map moved to progmem
2014-02-15 05:27:50 +11:00
Randy Mackay
415e48de19
TriCopter: use refs for all RC_Channels
2014-02-15 05:27:49 +11:00
Randy Mackay
01d30271d8
SingleCopter: use refs for all RC_Channels
2014-02-15 05:27:49 +11:00
Randy Mackay
18d3907928
TradHeli: use refs for all RC_Channels
2014-02-15 05:27:49 +11:00
Randy Mackay
cf1d6854b9
AP_MotorsMatrix: use ref for roll, pitch, yaw, thr channels
2014-02-15 05:27:49 +11:00
Randy Mackay
2f4fe3e192
AP_Motors: accessors to set roll, pitch, yaw, throttle
...
This saves 16bytes of RAM and slightly reduces the dependence upon the
RC_Channel class as the interface.
2014-02-15 05:27:49 +11:00
Randy Mackay
2c6470f87b
AP_MotorsMatrix: remove unused _num_motors
...
Saves 1 byte of RAM
2014-02-15 05:27:49 +11:00
Randy Mackay
32a0992985
MatrixMotors: motor_out array made local
2014-02-15 05:27:48 +11:00
Randy Mackay
2f3fc3a3ce
Single: remove use of motor_out array
...
Also allow fins to move when throttle at zero
2014-02-15 05:27:48 +11:00
Randy Mackay
a036009524
AP_MotorsTri: motor_out array made local
2014-02-15 05:27:48 +11:00
Randy Mackay
83321b8786
AP_Motors: remove motor_out array
...
Saves 16bytes of RAM
2014-02-15 05:27:48 +11:00
Randy Mackay
80ec61f217
TradHeli: make accessor methods const
2014-02-15 05:27:43 +11:00
Randy Mackay
48a0917670
Copter: make motors armed call const
2014-02-15 05:27:43 +11:00
Randy Mackay
a0298aee29
AP_Motors: expose throttle min and max
2014-02-15 05:27:34 +11:00
Dan Neault
262d384025
Coax: Yaw fix
...
Was using _rc_yaw servo_out instead of pwm_out to modify motors.
Corrected and less touchy in Yaw
2014-02-11 11:05:02 +09:00
Randy Mackay
14409ee20f
Copter: disable aux channels used for motors
2014-02-07 22:04:27 +09:00
Randy Mackay
7c25247c87
Copter: disable aux channel 7 for SingleCopter
...
Move servo range setup to AP_MotorsSingle
2014-02-07 22:04:26 +09:00
Randy Mackay
9b594dc5e1
Copter: disable aux channel ch7 for Tri
2014-02-07 22:04:24 +09:00
Randy Mackay
1426078cdb
TradHeli: disable aux channels 7 and 8
2014-02-07 22:04:23 +09:00
Dneault
5213ec4aa6
Coax: servos to ch1, ch2, motors to ch3, ch4
2014-02-07 12:36:19 +09:00
Randy Mackay
f60d94c4ab
Coax: remove unused servo3, servo4
...
Removed commented out code
2014-02-07 12:36:06 +09:00
Dneault
f48e106271
Copter: add coax heli support
...
Motors should be attached to RCOutputs 1 and 2, Flaps should be connected
to RC outputs 3 and 4
2014-02-07 12:36:04 +09:00
Robert Lefebvre
d441354961
TradHeli: Minor change to two param defaults
...
Also one param name in the code clarified.
2014-01-10 10:52:17 +09:00
Robert Lefebvre
782ce54a5c
TradHeli: Fix for yaw offset switching. Yaw Offset should switch on and off with the main motor, not waiting until the rotor has reached full speed.
2013-12-15 11:24:09 +09:00
Randy Mackay
343ea66cd1
Copter: add OctaQuad V frame
2013-12-12 21:17:49 +09:00
Randy Mackay
279d515e59
Copter: Y6 new motor factor fix
2013-12-12 11:57:04 +09:00
Randy Mackay
4148c4e024
TradHeli: bug fix for main rotor ramp up
...
The main rotor ramp was being held back by the rotor speed estimate
instead of being allowed to jump up to the estimate if it's lower.
Also fixed some incorrect indentation
2013-12-05 21:24:20 +09:00
Randy Mackay
8149b54807
Copter: add Y6 with all top props CW
...
Set FRAME parameter to 10
2013-12-03 23:22:14 +09:00
Randy Mackay
90937be3d4
AP_Motors: fix example sketch
2013-11-28 11:34:00 +09:00
Randy Mackay
f9e19b8006
TradHeli: remove use of motor_out array
...
No longer required for logging purposes as we have RCOU
2013-11-27 22:33:02 +09:00
Randy Mackay
851a538692
Copter: motor matrix comment change
2013-11-27 22:33:01 +09:00
Randy Mackay
652b4b4fe5
SingleCopter: motor test flaps servos in order
2013-11-27 22:33:00 +09:00
Randy Mackay
ccedf98238
Tri: call output_min at end of motors test
...
Minor change to comments
2013-11-27 22:32:49 +09:00
Randy Mackay
9f2086baf2
Copter: make motor_out array private
...
With new method of logging rc outputs access to the motor_out array is
not longer required
2013-11-27 21:55:28 +09:00
Andrew Tridgell
316ec5864e
AP_Motors: removed incorrect Makefile target
2013-11-23 18:50:55 +11:00
Randy Mackay
afbb199544
TradHeli: remove slash from parameter description
...
This may fix the issue in which the parameter descriptions are appearing
twice on the arducopter-parameters wiki page
2013-11-19 11:23:07 +09:00
Randy Mackay
330aa95769
Copter: default MOT_SPIN_ARMED to 70
2013-11-18 17:00:17 +09:00
Randy Mackay
7233a567fb
TradHeli: add accessor for phase_angle
2013-11-15 22:58:41 +09:00
Randy Mackay
c9c803ffd4
TradHeli: move STAB_COL_MIN to main parameter list
2013-11-15 22:58:32 +09:00
Randy Mackay
b71c6bfd76
TradHeli: add RSC_RUNUP_TIME param and rotor speed estimate
2013-11-15 22:58:29 +09:00
Randy Mackay
bc4dba0eea
TradHeli: ext gyro gain range 0 to 1000
2013-11-15 22:58:26 +09:00
Randy Mackay
197fc67897
TradHeli: move pilot desired rotor speed to heli.pde
2013-11-15 22:58:24 +09:00