Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
13,528 Commits 70 Branches 507 Tags 660 MiB
Commit Graph

3404 Commits

Author SHA1 Message Date
Randy Mackay 4e27dbdc42 Copter: ReleaseNotes for AC3.2-rc11 2014-10-06 11:55:46 +09:00
Randy Mackay 68a9286086 Copter: use define for pre-arm compass offset check 2014-10-03 13:59:31 +09:00
Randy Mackay 7ced9b1bd3 TradHeli: remove overall throttle level from landing check 2014-10-02 16:10:44 +09:00
Randy Mackay f059af2386 Copter: only report ahrs unhealthy after initialisation 2014-10-02 14:41:26 +09:00
Andrew Tridgell f2e6fa3fb0 Copter: use handle_set_mode() 2014-10-01 14:19:31 +10:00
Randy Mackay 77e89214eb Copter: shift pos targets to current location before takeoff 2014-09-29 15:26:54 +09:00
Jonathan Challinger 73e1719ee1 Copter: print frame type in log headers 2014-09-27 16:11:21 +09:00
Randy Mackay 8aa5c10d53 Copter: remove unused AIRFRAME definition 2014-09-27 15:15:13 +09:00
Randy Mackay 1a249a8129 Copter: check target of set-mode request from GCS 
Issue discovered and fix contributed by Deadolous
 2014-09-27 12:22:12 +09:00
Randy Mackay ef0e37b478 Copter: bugfix to condition-yaw for relative angles 
Thanks to roque-canales for raising the issue and paradisephil for finding
the specific piece of code that went wrong and suggesting the fix.
 2014-09-26 12:22:58 +09:00
Randy Mackay 45bc9fd10c Copter: add AC3.2 default to LOG_BITMASK value 2014-09-25 15:32:21 +09:00
Randy Mackay 0d88b602ec Copter: fix RSSI_RANGE param values 
The extra .0 after the 5 was causing the mission planner to not display
5V in the dropdown even though the value was 5.
 2014-09-25 15:32:20 +09:00
Randy Mackay ed566fa56c Copter: update AC3.2-rc10 release notes 2014-09-24 14:30:10 +09:00
Randy Mackay 41c576044f Copter: allow passthru for ch 9 ~ 14 
Based on work by Emile Castelnuovo
 2014-09-23 22:55:19 +09:00
Randy Mackay d4cfb432ca Copter: use disparity threshold define for pre-arm checks 
There are two duplicate checks, one in the pre-arm checks (i.e. checks
run every 15 seconds or so before the vehicle is armed) and one in the
arming checks (run immediately before arming).  The definition in the
pre-arm checks was still using the old hardcoded value.
 2014-09-23 19:33:04 +09:00
lthall 2b4f5fa79d Copter: increase autotune limits 
Rate D max to 0.020 (was 0.015)
Rate P max to 0.35 (was 0.25)
Stab P max to 20 (was 15)
 2014-09-22 21:33:35 +09:00
Randy Mackay e7753223ba Copter: low battery msg to severity high 2014-09-21 17:33:19 +09:00
Randy Mackay 193bc5331a Copter: cleanup enabling of cli and frsky telem for APM 2014-09-20 14:41:26 +09:00
Randy Mackay d8d1b38a52 Copter: increase Alt Disparity check to 2m 2014-09-20 12:24:36 +09:00
Randy Mackay 9bbf40109e Copter: add LOG_FROM_STARTUP definition 
Uncommenting this line in APM_Config.h will start logging as soon as the
board starts up instead of waiting for the vehicle to be armed
 2014-09-20 12:23:47 +09:00
Jason Short b2238b7c8a Copter: auto esc calibration 
Throttle is raised to maximum and then lowered without any input from
pilot
 2014-09-19 22:21:49 +09:00
Randy Mackay 58602bd1ae Copter: move esc calibration to separate file 
Restructured into case statement
Replaced use of g.throttle_max with definition
Added more comments
Send message to ground station instead of printing on console (although
probably both are unlikely to be read)
 2014-09-19 22:21:47 +09:00
Jason Short b57539a9ad AP_Motors: throttle_pass_through accepts pwm 2014-09-19 22:21:45 +09:00
Randy Mackay 1c11a91ec2 Copter: rename land_maybe_complete function 2014-09-19 16:43:17 +09:00
Randy Mackay b9977a1115 Copter: add land_complete_maybe flag 2014-09-19 16:43:15 +09:00
Randy Mackay 6951a20fb0 Copter: soften loiter target when maybe landed 
Applies to auto's land, land, loiter, pos hold and rtl flight modes
 2014-09-19 16:43:12 +09:00
Randy Mackay b552479e31 Copter: typo fix for baro vs inav alt disparity definition 2014-09-18 17:32:03 +09:00
Randy Mackay 18e3db0011 Copter: define limit for baro vs inav alt disparity 2014-09-18 17:24:40 +09:00
Andre Kjellstrup b4c6d6395e Copter: reset battery_fs after dis/rearming 2014-09-18 11:17:03 +09:00
Randy Mackay 2efeb768e0 Copter: allow GCS to turn safety switch on/off 2014-09-17 21:51:25 +09:00
Randy Mackay 9bcf9a31ed Copter: set sys_status motor outputs bit from safety switch 2014-09-17 21:51:23 +09:00
Randy Mackay 9f3803052f Copter: add support for DO_PARACHUTE from GCS 
Mission command support was already included but this adds support for
DO_PARACHUTE received as a COMMAND_LONG message which are sent from the
GCS when the command should be executed immediately
 2014-09-17 21:14:26 +09:00
Randy Mackay adf00a207b Copter: enable EPM by default on Pixhawk 2014-09-17 21:14:22 +09:00
Randy Mackay bbe4438a6b Copter: add support for DO_GRIPPER command 2014-09-17 21:14:19 +09:00
Randy Mackay 3fa3cb6d65 Copter: remove EPM neutral from ch7/ch8 switch 
The EPM library returns the pwm output sent to the EPM to the neutral
position automatically meaning an explicit ch7/ch8 setting is not
required
 2014-09-17 21:13:45 +09:00
Randy Mackay 14d80910ec Copter: integrate EPM ver2 2014-09-17 21:13:35 +09:00
Jonathan Challinger 8ca4795ffb Copter: Log NTUN while in LAND mode with GPS 2014-09-16 10:19:33 +09:00
Randy Mackay 345d4353e5 Copter: adjust EKF_CHECK parameter description 
Default has been changed to 0.8 for -rc9 so we need to update the
description values so they match
 2014-09-12 21:28:41 +09:00
Randy Mackay d15a5f9dcb Copter: THR_ACCEL_IMAX default to 800 2014-09-12 15:11:48 +09:00
Randy Mackay 224122958c Copter: reduce throttle to min once landed in RTL 
This catches the case where the vehicle lands but the user doesn't
immediately put the throttle to zero.  Before this check it would
continue to attempt to hold it's
 2014-09-12 14:16:05 +09:00
Randy Mackay eac26cdd0f Copter: THR_ACCEL_IMAX param range increased 2014-09-12 14:16:04 +09:00
Randy Mackay a12d9109e0 Copter: remove thr check during init_arm_motors 
This check is redundant now that we have a check within the arm_check()
function.
Removing this check does raise a slight danger that someone could raise
the throttle after arming but before the gyro and baro calibration has
completed but the delay has been greatly shortened from what it once was
so there is much less danger that someone could approach the vehicle
during the short arming delay.
 2014-09-11 21:13:35 +09:00
Randy Mackay 5720bff29f Copter: AC3.2-rc9 release notes 2014-09-11 20:38:56 +09:00
Randy Mackay 906b3dfbec Copter: AC3.2-rc8 release notes 2014-09-11 16:54:04 +09:00
Randy Mackay 4c6b0bb1cb Copter: format change to flight mode default defined 
This also kicks off the build for AC3.2-rc8
 2014-09-11 16:52:36 +09:00
Randy Mackay 48bc1456d0 Copter: increase Rate PID param ranges 
RATE_RLL_P to 0.25 (was 0.20)
RATE_PIT_P to 0.25 (was 0.20)
RATE_YAW_P to 0.50 (was 0.25)
RATE_YAW_I to 0.05 (was 0.02)
 2014-09-10 16:40:36 +09:00
Craig Elder ea82caf7a4 Copter: Parameters.pde 
Corrected typo in parameter description
 2014-09-09 12:34:59 -07:00
Randy Mackay 0d7a999fc1 Copter: arming check that throttle is low 2014-09-09 23:02:18 +09:00
Randy Mackay 294f836c8c Copter: never send unhealthy terrain status 
Copter does not yet rely on the terrain data (it's for informational
purposes only) so we will temporarily disable the failure flags to the
GCS to avoid support calls
 2014-09-09 22:19:20 +09:00
Randy Mackay bf18fb896a Copter: send extended status to GCS only after initialisation 2014-09-09 22:17:46 +09:00