Commit Graph

269 Commits

Author SHA1 Message Date
Andrew Tridgell 8652bfee8d APM: added RSSI_PIN option for receiver RSSI
this allows you to configure the pin for receiver RSSI without
recompiling
2012-11-06 22:04:41 +11:00
Andrew Tridgell e479af67ff APM: fixed loiter radius docs to reflect new limit 2012-10-30 16:19:24 +11:00
rmackay9 775489d658 ArduPlane: added BATT_VOLT_PIN and BATT_CURR_PIN parameters to allow support for new 3DR IV battery monitor 2012-10-13 20:51:41 +09:00
Andrew Tridgell 6bae5ecd51 APM: added THR_SUPP_MAN option
this allows for manual throttle control during auto throttle
suppression. This is useful for keeping a petrol engine idling before
takeoff
2012-09-22 20:17:06 +10:00
Andrew Tridgell cebb67e1df APM: removed the unused sonar code
when we start supporting a sonar we'll add a AP_Sonar library, like
AP_Airspeed
2012-09-19 19:35:22 +10:00
Andrew Tridgell 2324997e16 APM: added ALT_OFFSET parameter
useful to adjust for barometric pressure changes during a long flight
2012-09-19 16:23:25 +10:00
Andrew Tridgell 5c3595e0dc APM: fixed throttle nudging
The nudge value depended on RC3_TRIM, which is not a reliable
value. It tried to only take effect when the throttle stick was above
50%, but if RC3_TRIM was high for some reason (say 1500) then it would
actually depress the throttle by a large amount, which could cause the
plane to stall.

This also adds a boolean option THROTTLE_NUDGE to allow disabling of
throttle nudging
2012-09-09 19:39:04 +10:00
Andrew Tridgell 164c60d25f APM: added RUDDER_STEER option
when enabled, this uses only the rudder to steer during takeoff and
landing, using aileron only for levelling
2012-09-08 10:07:03 +10:00
Andrew Tridgell 96ea350143 APM: added XTRK_MIN_DIST option
this allows you to disable crosstrack correction on short legs
2012-09-08 10:06:44 +10:00
Andrew Tridgell 9a987ce116 APM: fixed docs for LIM_PITCH_MIN 2012-08-30 14:55:08 +10:00
Andrew Tridgell f6c3197cd2 APM: added new TELEM_DELAY parameter
number of seconds to delay telemetry
2012-08-30 08:59:39 +10:00
Andrew Tridgell fce01464b1 APM: added ALT_CTRL_ALG parameter
this allows you to select different altitude control algorithms. The
current choices are for the default (automatic based on if airspeed is
available), or to force a non-airspeed algorithm

The idea is to make it possible to use airspeed for some things (like
wind speed, speed scaling) but not for alt control
2012-08-28 20:18:24 +10:00
Andrew Tridgell c9cf483822 APM: added XTRK_USE_WIND parameter
when enabled this will use the wind estimation code to adjust the
navigation bearing, allowing the navigation code to cope with much
higher levels of wind while using a compass
2012-08-25 17:49:26 +10:00
Andrew Tridgell d445482ace APM: added optional use of new APM_Control library
thanks to Jon Challinger for the new controllers!
2012-08-22 12:45:14 +10:00
uncrustify 0f415bbc6a uncrustify ArduPlane/Parameters.pde 2012-08-21 19:19:50 -07:00
Andrew Tridgell bf2319a0fc AHRS: fixed reference to AHRS var_info for APM and ACM 2012-08-21 15:58:32 +10:00
rmackay9 6d489947cf ArduPlane: replaced many "int" with "int16_t", "long" with "int32_t" 2012-08-18 18:26:13 +09:00
Andrew Tridgell 5e690d5680 APM: added parameter FBWB_ELEV_REV
this fixes issue 343
2012-08-17 15:04:53 +10:00
Andrew Tridgell ad73c229ab APM: added LAND_FLARE_ALT and LAND_FLARE_SEC
these allow you to configure the altitude and time before touchdown to
flare the plane and lock the heading. Useful on larger planes.
2012-08-15 18:11:16 +10:00
Andrew Tridgell 1252ddfe0c APM: rename RDRSTEER to WHEELSTEER
thanks to Jon for the suggestion
2012-08-15 16:28:59 +10:00
Andrew Tridgell e26e8b3b67 APM: added RDRSTEER_ PID for steering on ground
this allows for rolling takeoff with steering, and use of rudder in
landing
2012-08-15 12:39:35 +10:00
Andrew Tridgell 817017658d APM: implement FENCE_ACTION_REPORT
when FENCE_ACTION is set to FENCE_ACTION_REPORT a fence breach is
reported, but the flight mode is not changed
2012-08-15 12:39:35 +10:00
Andrew Tridgell 2865434d02 APM: added 'OBC' failsafe module for ArduPlane
this adds FS_* parameters for setting up APM to follow the outback
challenge failsafe rules.

This includes:

 - manual pin
 - heartbeat pin
 - waypoint for heartbeat failure
 - waypoint for GPS failure
2012-08-15 12:39:34 +10:00
Andrew Tridgell 3bdc7d41be INS: disable INS AP_Param table when not on APM1 hardware
this could cause overwriting of memory with default values
2012-08-11 22:06:03 +10:00
Andrew Tridgell 5498d347f3 APM: Added RST_MISSION_CH option
this allows a pilot to reset the mission using a transmitter
switch. Very useful for repeating a mission during testing
2012-08-09 10:33:16 +10:00
Andrew Tridgell e133900c68 APM: Added STICK_MIXING option
this replaces the compile time option. Disabling during long distance
flights when the transmitter may be out of range is useful.
2012-08-09 08:53:29 +10:00
Amilcar Lucas d34549f386 Add an optional second mount to ArduPlane and ArduCopter 2012-08-08 23:22:24 +02:00
Andrew Tridgell 5bfd1200d6 APM: change variables to use _cm, _cd and _ms suffix for units
this makes it less likely that we mix up units
2012-08-08 12:12:30 +10:00
Andrew Tridgell a823c9ceae APM: removed cli slider and dipswitch options
use mavlink/eeprom for all config
2012-08-08 12:12:29 +10:00
Andrew Tridgell 12cd6b68ff AP_Param: update ArduPlane core for new AP_Param interface 2012-08-08 12:11:57 +10:00
rmackay9 176e6fdd68 ArduPlane: bug fix to global var_info parameter list for ahrs object. 2012-08-01 10:52:34 +09:00
Andrew Tridgell cb61c3be96 APM: fixed case of 'LAND_PITCH_CD'
mavlink parameters are uppercase by convention
2012-07-29 17:07:38 +10:00
rmackay9 06e35820e5 ArduPlane: allow MPU6000's DMP to be used for attitude estimation.
Enable by adding this line to APM_Config.h:
#define DMP_ENABLED ENABLED
2012-07-28 19:50:40 +09:00
rmackay9 842ce47219 ArduPlane: change to Parameters.pde to support moving var_info from AP_AHRS to AP_AHRS_DCM 2012-07-28 14:31:01 +09:00
Andrew Tridgell 6bcfe913f7 APM: added a SCALING_SPEED parameter
this allows users to adjust the base speed used for scaling roll/pitch
PIDs. This can be used to make PIDs work for both airspeed and
non-airspeed control
2012-07-26 11:30:23 +10:00
Andrew Tridgell 3c2fc72654 APM: fixed HIL build 2012-07-26 10:09:07 +10:00
Jason Short 98237a0e00 Added Oilpan INS group object param 2012-07-18 23:07:50 -07:00
Jeff Taylor d02655ac56 APM: Fixed bug where landing_pitch wasnt initialized properly
this adds a new LAND_PITCH_CD parameter to control the landing pitch
when an airspeed sensor is not being used
2012-07-19 13:59:30 +10:00
Andrew Tridgell d6e370886f APM: rename airspeed_cruise to airspeed_cruise_cm to make the units clearer
it is in cm/s, not m/s
2012-07-19 11:50:41 +10:00
Amilcar Lucas 3d385c0fb4 ArduPlane parameters: re-order the files, looks like the second file gets ignored :( 2012-07-18 22:52:17 +02:00
Amilcar Lucas 8a8e11fa7f ArduPlane parameters: Add base class info as well 2012-07-18 22:39:49 +02:00
Amilcar Lucas 610fdeacc1 Support up to 11 servos in APM2
Conflicts:

	ArduPlane/ArduPlane.pde
2012-07-18 22:01:19 +02:00
Michael Oborne 636fcadde4 fix rc libray param gen 2012-07-18 07:03:39 +08:00
Andrew Tridgell de3c9ce56d Airspeed: change APM to use new AP_Airspeed library
the next step is AHRS dead reckoning
2012-07-16 11:21:50 +10:00
Michael Oborne 67ecaa9252 AP fix duplicate keys in param config 2012-07-13 07:06:01 +08:00
Amilcar Lucas dfe0983e1e Merge the changes from APM_Camera branch into ArduCopter
Conflicts:

	ArduCopter/Camera.pde
	ArduCopter/Parameters.pde
2012-07-11 00:39:13 +02:00
Andreas M. Antonopoulos de64c05f8e param_parser: cosmetic
Arduplane: doc fixes
2012-07-08 21:45:26 -07:00
Andrew Tridgell 78c51b945f APM: fixed DisplayName/Description mixups in parameter docs 2012-07-07 17:40:43 +10:00
Andrew Tridgell 5abd26a142 APM: more parameter documentation 2012-07-05 15:06:45 +10:00
Andrew Tridgell 95d9569b35 Docs: fixed some units in APM parameter docs 2012-07-05 13:00:46 +10:00
Andrew Tridgell 99b11e4f19 Mount: enable mount control via eeprom parameters
this enables MNT_* parameter control of the camera mount code. It also
fixes the conversion of calculated angles between degrees and
integers, and fixes stabilised mount control when yaw control is not
available.
2012-07-03 10:21:01 +10:00
Michael Oborne b2d73d8f68 fixup sitl attribute group for planner. - causing invalid advanced/standard views 2012-07-01 21:43:32 +08:00
Andrew Tridgell 55092c25a6 SITL: enable the SIM_* parameters in ArduCopter and ArduPlane 2012-06-29 15:10:52 +10:00
Andrew Tridgell 5bccfbd94c Barometer: fixed airstart for APM
we need to re-load the ground pressure and temperature from eeprom on
and airstart
2012-06-27 16:01:50 +10:00
Amilcar Lucas b072a59843 Improve parameters descriptive text 2012-06-21 00:20:37 +02:00
Amilcar Lucas 1906e06b69 Added camera trigger functionality 2012-06-13 21:00:20 +02:00
Amilcar Lucas a32b7c200b Add "3 axis camera stabilization" and "point camera to 3D point" functionality
Patch by Gregory Fletcher and reviewed by me
2012-06-13 20:55:19 +02:00
Amilcar Lucas 5ffd489d87 Spellcheck 2012-06-13 20:44:35 +02:00
Michael Oborne c307b69515 increase resolution on params 0.1 > 0.01 2012-05-24 06:22:57 +08:00
Andrew Tridgell b3aa704c49 AirSpeed: added parameter ARSPD_USE
setting ARSPD_ENABLE to 1 and ARSPD_USE to 0 allows the airspeed
sensor to be initialised and logged without it being used for flight
control. This is very useful when initially testing an airspeed sensor
in a new plane. It also makes it possible to enable/disable the use of
the airspeed sensor during a flight at any time.
2012-05-22 20:02:23 +10:00
Michael Oborne 218e70cd8b AP - fix attitude level hil mavlink 1.0 issue 2012-05-06 11:05:35 +08:00
Michael Oborne 75f091cd9c more arduplane param info 2012-04-30 20:39:41 +08:00
Michael Oborne c1115d83c7 update some arduplane config items 2012-04-30 18:44:20 +08:00
Andrew Tridgell d07b77237e AHRS: enable AHRS_ group in ArduPlane 2012-04-16 20:55:13 +10:00
Andrew Tridgell 4c4c38f69a APM: Added MANUAL_LEVEL option
when MANUAL_LEVEL is set to 1, we don't do accelerometer levelling at
startup, and instead used the values saved in the EEPROM. This makes
it easier to do levelling on the bench, or once for a series of
flights for the day
2012-03-29 12:39:53 +11:00
Andrew Tridgell 718a5b70e3 AP_Param: fixed saving of sensor calibration
this fixes the saving of the accel and gyro calibration to EEPROM,
which was initially broken by the AP_Param conversion
2012-02-18 10:51:57 +11:00
Andrew Tridgell 2c3ec5de99 fixed two parameter names 2012-02-13 16:22:51 +11:00
Andrew Tridgell 676ca03977 expose mavlink stream rates as parameters 2012-02-13 16:22:51 +11:00
Andrew Tridgell f22988163e imported new Parameters code to APM 2012-02-13 16:22:51 +11:00