Commit Graph

225 Commits

Author SHA1 Message Date
Randy Mackay 18d3907928 TradHeli: use refs for all RC_Channels 2014-02-15 05:27:49 +11:00
Randy Mackay cf1d6854b9 AP_MotorsMatrix: use ref for roll, pitch, yaw, thr channels 2014-02-15 05:27:49 +11:00
Randy Mackay 2f4fe3e192 AP_Motors: accessors to set roll, pitch, yaw, throttle
This saves 16bytes of RAM and slightly reduces the dependence upon the
RC_Channel class as the interface.
2014-02-15 05:27:49 +11:00
Randy Mackay 2c6470f87b AP_MotorsMatrix: remove unused _num_motors
Saves 1 byte of RAM
2014-02-15 05:27:49 +11:00
Randy Mackay 32a0992985 MatrixMotors: motor_out array made local 2014-02-15 05:27:48 +11:00
Randy Mackay 2f3fc3a3ce Single: remove use of motor_out array
Also allow fins to move when throttle at zero
2014-02-15 05:27:48 +11:00
Randy Mackay a036009524 AP_MotorsTri: motor_out array made local 2014-02-15 05:27:48 +11:00
Randy Mackay 83321b8786 AP_Motors: remove motor_out array
Saves 16bytes of RAM
2014-02-15 05:27:48 +11:00
Randy Mackay 80ec61f217 TradHeli: make accessor methods const 2014-02-15 05:27:43 +11:00
Randy Mackay 48a0917670 Copter: make motors armed call const 2014-02-15 05:27:43 +11:00
Randy Mackay a0298aee29 AP_Motors: expose throttle min and max 2014-02-15 05:27:34 +11:00
Dan Neault 262d384025 Coax: Yaw fix
Was using _rc_yaw servo_out instead of pwm_out to modify motors.
Corrected and less touchy in Yaw
2014-02-11 11:05:02 +09:00
Randy Mackay 14409ee20f Copter: disable aux channels used for motors 2014-02-07 22:04:27 +09:00
Randy Mackay 7c25247c87 Copter: disable aux channel 7 for SingleCopter
Move servo range setup to AP_MotorsSingle
2014-02-07 22:04:26 +09:00
Randy Mackay 9b594dc5e1 Copter: disable aux channel ch7 for Tri 2014-02-07 22:04:24 +09:00
Randy Mackay 1426078cdb TradHeli: disable aux channels 7 and 8 2014-02-07 22:04:23 +09:00
Dneault 5213ec4aa6 Coax: servos to ch1, ch2, motors to ch3, ch4 2014-02-07 12:36:19 +09:00
Randy Mackay f60d94c4ab Coax: remove unused servo3, servo4
Removed commented out code
2014-02-07 12:36:06 +09:00
Dneault f48e106271 Copter: add coax heli support
Motors should be attached to RCOutputs 1 and 2, Flaps should be connected
to RC outputs 3 and 4
2014-02-07 12:36:04 +09:00
Robert Lefebvre d441354961 TradHeli: Minor change to two param defaults
Also one param name in the code clarified.
2014-01-10 10:52:17 +09:00
Robert Lefebvre 782ce54a5c TradHeli: Fix for yaw offset switching. Yaw Offset should switch on and off with the main motor, not waiting until the rotor has reached full speed. 2013-12-15 11:24:09 +09:00
Randy Mackay 343ea66cd1 Copter: add OctaQuad V frame 2013-12-12 21:17:49 +09:00
Randy Mackay 279d515e59 Copter: Y6 new motor factor fix 2013-12-12 11:57:04 +09:00
Randy Mackay 4148c4e024 TradHeli: bug fix for main rotor ramp up
The main rotor ramp was being held back by the rotor speed estimate
instead of being allowed to jump up to the estimate if it's lower.

Also fixed some incorrect indentation
2013-12-05 21:24:20 +09:00
Randy Mackay 8149b54807 Copter: add Y6 with all top props CW
Set FRAME parameter to 10
2013-12-03 23:22:14 +09:00
Randy Mackay 90937be3d4 AP_Motors: fix example sketch 2013-11-28 11:34:00 +09:00
Randy Mackay f9e19b8006 TradHeli: remove use of motor_out array
No longer required for logging purposes as we have RCOU
2013-11-27 22:33:02 +09:00
Randy Mackay 851a538692 Copter: motor matrix comment change 2013-11-27 22:33:01 +09:00
Randy Mackay 652b4b4fe5 SingleCopter: motor test flaps servos in order 2013-11-27 22:33:00 +09:00
Randy Mackay ccedf98238 Tri: call output_min at end of motors test
Minor change to comments
2013-11-27 22:32:49 +09:00
Randy Mackay 9f2086baf2 Copter: make motor_out array private
With new method of logging rc outputs access to the motor_out array is
not longer required
2013-11-27 21:55:28 +09:00
Andrew Tridgell 316ec5864e AP_Motors: removed incorrect Makefile target 2013-11-23 18:50:55 +11:00
Randy Mackay afbb199544 TradHeli: remove slash from parameter description
This may fix the issue in which the parameter descriptions are appearing
twice on the arducopter-parameters wiki page
2013-11-19 11:23:07 +09:00
Randy Mackay 330aa95769 Copter: default MOT_SPIN_ARMED to 70 2013-11-18 17:00:17 +09:00
Randy Mackay 7233a567fb TradHeli: add accessor for phase_angle 2013-11-15 22:58:41 +09:00
Randy Mackay c9c803ffd4 TradHeli: move STAB_COL_MIN to main parameter list 2013-11-15 22:58:32 +09:00
Randy Mackay b71c6bfd76 TradHeli: add RSC_RUNUP_TIME param and rotor speed estimate 2013-11-15 22:58:29 +09:00
Randy Mackay bc4dba0eea TradHeli: ext gyro gain range 0 to 1000 2013-11-15 22:58:26 +09:00
Randy Mackay 197fc67897 TradHeli: move pilot desired rotor speed to heli.pde 2013-11-15 22:58:24 +09:00
Randy Mackay 942c14258b TradHeli: ramp up changes
Rewrote tail and main rotor ramp up methods
Moved direct drive ESC speed control into rsc_control method
Pass in ch7 servo as servo_aux to TradHeli motors object constructor
split CH7_SETPOINT parameter into GYR_GAIN and DIRECTDRIVE parameters
replaced RSC_RATE with uint8_t RSC_RAMP_TIME parameter
rename GOV_SETPOINT parameter to RSC_SETPOINT
RSC_MODE parameter description updated to indicate it controls the
source of main rotor speed
2013-11-15 22:58:13 +09:00
Robert Lefebvre 9ac051c56d TradHeli: BugFix to ColYaw
Credit to Jolyon Saunders for finding this bug.
2013-11-15 22:58:11 +09:00
Robert Lefebvre 4426060ccc TradHeli: COLYAW not applied when the motor is not running 2013-11-15 22:58:06 +09:00
Robert Lefebvre 9ae66c1773 TradHeli: add support for drive tail rotors
Repurposed external gyro and made it multi-funcitonal.
required PWM on Ch8 to start the motor in RSC Mode moved up from 100 to 400. This is to facilitate two-stage switching of the motors with PWM>100 starting the tail motor, and PWM>400 starting the main motor.
Additional amendments by Randy
2013-11-15 22:58:04 +09:00
Randy Mackay 7ae0d3320b TradHeli: add landing collective min 2013-11-15 22:57:58 +09:00
Randy Mackay 1f65bb537f TradHeli: add get_pilot_desired_collective
Perhaps this should be moved to the main code's heli.pde sketch
2013-11-15 22:57:51 +09:00
Randy Mackay 13a412ee21 TradHeli: make parameters and variables private
add accessors for variables and params required in main code
replace tabs with spaces
2013-11-15 22:57:41 +09:00
Randy Mackay 2cc48ffcd6 Copter: formatting and param description changes 2013-11-15 22:57:37 +09:00
Randy Mackay d54b1ea446 CopterMotors: fix example sketch 2013-11-14 22:27:10 +09:00
Randy Mackay ce045c77a4 Copter: remove unused variable from Single copter 2013-11-14 22:26:53 +09:00
Randy Mackay 14dc1a1c88 Copter: add @User and @Increment to motor params description 2013-11-13 12:28:59 +09:00
Randy Mackay e53c57b0a6 Copter: default SPIN_WHEN_ARMED to zero 2013-11-13 12:28:01 +09:00
Randy Mackay 81d83f1c55 SingleCopter: formatting changes
replace tab with 4-spaces
remove blank lines
2013-11-12 23:40:29 +09:00
ssq870424 07d3f2a3c5 Copter: add support for singlecopter airframe
this is the newest singlecopter airframe programme.
This kind of aerial vehicles include Honeywell T-hawk and Goldeneye.
2013-11-12 23:40:27 +09:00
Robert Lefebvre 5d946be77c TradHeli: Change user description for COLYAW parameter. 2013-11-03 12:56:59 +09:00
Randy Mackay bb1664185f Copter: correct @Range of MOT_TCRV_MAXPCT parameter 2013-10-30 20:53:21 +09:00
texlan 78acea820f Copter: fix symmetry in stability patch for Tricopters
Removes the "Increase opposing motors by 1/2 the overage of the high
motor" logic and merely moves all 3 motors down by the same amount if
one is over out_max. This eliminates the asymmetric scaling of
the previous logic when more than one motor is over out_max. This
resolves #537
2013-10-21 20:12:53 +09:00
Randy Mackay 943d7374f6 Copter: slow start motors from 0 to min throttle 2013-10-20 14:51:35 +09:00
texlan 53553751d1 Copter: Correctly set limit.lower flags for Tricopters
Resolves #536
2013-10-19 23:08:25 +09:00
Randy Mackay e0c4785b2a Copter: OctaQuad H-frame support 2013-10-18 10:41:07 +09:00
Randy Mackay d3fcfe669d Copter Motors: increase MOT_SPIN_ARMED to int16 2013-09-18 13:28:01 +09:00
Andrew Tridgell 5bef6dd539 AP_Motors: fixed example build 2013-09-13 10:53:53 +10:00
Randy Mackay 0a047ae1c1 Copter Motors: increased spin-when-armed to 70
Changed choices to be displayed in ground stations
2013-09-12 22:36:04 +09:00
Randy Mackay 62cb5c172b Copter Motors: add slow start feature
Combined armed, frame orientation and slow_start into flags bitmask
Removed ability to set max throttle because it was never used
Re-ordered class variables
2013-09-12 22:27:44 +09:00
Andrew Tridgell 97b7130bb9 libraries: update license header to GPLv3
we switched to GPLv3 a long time ago, but neglected to update the
per-file license headers
2013-08-30 13:01:39 +10:00
Andrew Tridgell 01387a1553 AP_Motors: fixed examples build 2013-08-30 13:01:39 +10:00
Randy Mackay 0797489ad8 Motors: use AP_Notify static flags variable 2013-08-30 13:01:35 +10:00
Randy Mackay f8a872f01e AP_Motors: update notify 2013-08-30 13:01:34 +10:00
Randy Mackay 8d26fb5581 Copter Motors: by default spin motors at 65 when armed 2013-07-28 18:18:52 +09:00
Randy Mackay fe412437c2 Copter: add flags for upper and lower throttle limits
Freeze desired altitude when motors hit a limit
2013-07-28 18:18:39 +09:00
Randy Mackay f3a2db195e Copter Motors: remove old style stability patch 2013-07-25 15:34:04 +09:00
Randy Mackay 43379f20c3 Copter Motors: replace limit bitmask with structure 2013-07-21 13:58:24 +09:00
Robert Lefebvre c812d07993 TradHeli: Creating motor_runup_complete bool which is to confirm that the heli motor is running. This will be used for advanced features in the future. 2013-07-19 16:16:08 +09:00
Robert Lefebvre 957cb094ea TradHeli: Remove unused RSC Mode 3. 2013-07-19 16:16:06 +09:00
Randy Mackay 336357fbaf Copter: ensure _spin_when_armed is not higher than _min_throttle 2013-07-16 15:25:57 +09:00
Randy Mackay 62f3eed4e0 Copter: fix to SPIN_ARMED parameter desciption 2013-07-16 12:59:38 +09:00
Randy Mackay b709b90a59 Copter: implement safety spin for Tricopters 2013-07-16 12:48:01 +09:00
Randy Mackay 6477c746cd Copter: renamed MOT_UNSAFE_THR to MOT_SPIN_ARMED
Removed special purpose spin_unsafe function
renamed _throttle_unsafe to _spin_when_armed and changed to an AP_Int8
2013-07-16 12:47:59 +09:00
Jonathan Challinger 2725f219cb Copter: Warn user with motors while copter is arming 2013-07-16 12:47:51 +09:00
Jonathan Challinger ae2b1e3b7e AP_Motors: Added MOT_UNSAFE_THR parameter - Throttle setting used to signal that the copter is armed or otherwise unsafe to approach 2013-07-16 12:47:49 +09:00
rmackay9 073e2c9f15 ACMotors: bug fix to yaw limit 2013-07-05 13:51:59 -10:00
Randy Mackay 76028fc9d3 Copter Motors: use _min_throttle in output_test 2013-05-31 15:16:04 +09:00
Randy Mackay 28f2f87b26 Copter Motors: minor formatting change 2013-05-31 15:16:04 +09:00
Andrew Tridgell 81f7ae9108 AP_Motors: fixed indent-tabs-mode 2013-05-30 09:51:34 +10:00
Randy Mackay ec7ee47099 Copter: scaling stability patch 2013-05-27 11:21:31 +09:00
Randy Mackay 6a65a32de2 CopterMotors: add formatting info to top of files 2013-05-20 10:48:42 +09:00
Randy Mackay 5235f4cacd Copter: allow Tri copters to init ESCs through APM/PX4 2013-05-19 17:28:39 +09:00
Randy Mackay 610edd8f9a ACMotors: small formatting change 2013-05-14 19:01:53 +09:00
Randy Mackay cd5795a4ac ACMotors: make a few more functions non-virtual
Saves at least 22 bytes of RAM
2013-05-14 18:23:36 +09:00
Randy Mackay ad00e0ee1e ACMotors: make test_order uint_8 2013-05-14 18:03:34 +09:00
Randy Mackay 88893f4209 ACMotors: make a few functions non-virtual 2013-05-14 17:41:12 +09:00
Randy Mackay bd07b1e57b ACMotors: remove unused get_num_motors function
Saves about 4 bytes of RAM
2013-05-14 17:35:27 +09:00
Randy Mackay 5bb0582854 ACMotors: ESC Calibration only for enabled motors 2013-05-14 17:07:36 +09:00
Randy Mackay 33d1129904 Copter: remove unused TB_RATIO parameter 2013-05-14 16:56:55 +09:00
Randy Mackay 7a81c41689 AP_Motors: motor_enabled array to bool
Also increased the default MAX_THROTTLE from 850 to 1000 but this number
is always overwritten by the main code anyway so should have no
functional impact.
2013-05-14 16:05:22 +09:00
Randy Mackay 1cfd5900a8 Copter: add support for H-quad frame
H-quads are like X quads but the motors spin in the opposite direction.
Having the motors reversed seems to help with yaw authority because of
the slight flex in bodies
2013-05-03 23:13:40 +09:00
Randy Mackay cb5f8826f8 Copter: Leonard's fix for trapezoidal frame
We need to allow yaw_factors to be floats in the add_motor method
2013-04-25 17:52:19 +09:00
Randy Mackay 1a7cffefe6 TradHeli: change coll_out to int16_t
was incorrectly defined as an AP_Int16 parameter
2013-04-24 11:32:26 +09:00
Andrew Tridgell 2c05030fb1 AP_Motors: use the right constrain() function 2013-04-22 13:26:49 +10:00
Randy Mackay a656b619f5 AP_Motors: remove auto_armed
redundant flag that was already held in the main code which is where it
belongs.
2013-04-17 21:28:42 +09:00
foobarbecue c07702f46d Update AP_MotorsOctaQuad.cpp
There were two "4"s in the motor test order values. Presumably a typo.
2013-04-05 11:22:56 +09:00