Randy Mackay
ef5d3f1ba7
AP_HAL_ChibiOS: Durandal peripheral power on at startup
2024-04-30 20:29:20 +09:00
Andy Piper
876f4f7a8f
AP_HAL_ChibiOS: dshot iofirmware for Durandal, Pixhawk6C, CubePurple and CubeYellow
2023-08-15 06:53:48 +10:00
Andrew Tridgell
5908508811
hwdef: default most boards to MAVLink2 for 2nd USB endpoint
...
only CubeOrange and CubeBlack left as SLCAN
2023-07-31 19:03:13 +10:00
Peter Barker
338a4d6b38
hwdef: remove HAL_BOARD_LOG_DIRECTORY and HAL_BOARD_TERRAIN_DIRECTORY defaults
...
these are now defaulted in chibios_hwdef.py
2023-07-19 17:25:18 +09:00
Andrew Tridgell
b808351f2a
hwdef: enable DFU on some boards
2022-08-30 10:51:06 +10:00
bugobliterator
0c78f8bac2
AP_HAL_ChibiOS: add support for booting into DFU
2022-08-30 10:51:06 +10:00
Tom Pittenger
c28db6d91c
AP_HAL_ChibiOS: Durandal hwdef to enable Sagetech MXS driver by default for CI to test against
2022-06-14 07:10:17 -07:00
Mirko Denecke
11a74cf28c
AP_HAL_ChibiOS: fix auxiliary typo
2022-05-02 10:55:08 +10:00
Peter Barker
0eacc0348e
AP_HAL_ChibiOS: remove HAL_COMPASS_DEFAULT define
...
this doesn't actually allow you to specify a default, despite the name
and a couple of hwdefs trying to use it that way.
This would have stopped being useful when we did the
compass-prority-table stuff - or before.
2022-02-01 12:10:38 +11:00
TunaLobster
11f98f7421
AP_HAL_ChibiOS: fix ADC scaling on IOMCU
2021-11-16 14:12:43 +11:00
Andrew Tridgell
c3442d0143
hwdef: added alternative Durandal 20602 IMU
2021-11-11 08:28:51 +11:00
Randy Mackay
9c1ca781f6
AP_HAL_ChibiOS: update for renamed BRD_HEAT_ parameters
2021-11-09 08:02:57 +09:00
Andrew Tridgell
68146d541c
HAL_ChibiOS: removed boilerplate lines from bootloaders
2021-10-26 15:56:53 +11:00
Peter Barker
70aef84997
AP_HAL_ChibiOS: remove definitions of BOARD_PWM_COUNT_DEFAULT
...
No longer used
2021-08-20 10:51:19 +10:00
Andrew Tridgell
91dce554d1
HAL_ChibiOS: removed unnecessary USB product IDs from boards
2021-05-27 09:30:30 +09:00
Andrew Tridgell
2ab8ad0ef0
HAL_ChibiOS: added Durandal pinout details
2021-02-09 07:14:02 +11:00
Andrew Tridgell
f93e2f6717
HAL_ChibiOS: enable 32k FRAM on H7 boards
2021-01-16 06:47:10 +11:00
Andrew Tridgell
5e80b10396
HAL_ChibiOS: enable telem3 on Durandal
...
the RCIN issue is not there in the final production boards
2020-10-03 20:22:56 +10:00
Andrew Tridgell
571fbf8f71
HAL_ChibiOS: update power VALID pins
2020-06-04 09:51:27 +10:00
Andrew Tridgell
32cdfddf12
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
...
much easier to understand
2020-04-28 10:32:23 +10:00
Andrew Tridgell
e8b2b52bae
HAL_ChibiOS: removed STM32_VDD from hwdef.dat
...
use default
2020-04-28 10:32:23 +10:00
Andrew Tridgell
d9e2a644ea
HAL_ChibiOS: fixed Durandal buzzer in bootloader
...
need to pull low to avoid buzzer running in bootloader
2020-04-24 19:46:22 +10:00
Andrew Tridgell
d35fff5186
HAL_ChibiOS: set CS pins high while in bootloader
...
this appears to be the root cause of the parameter resets on
CubeOrange. We need to ensure the CS pin is not floating or random
noise on the SPI bus for FRAM can cause the FRAM to become corrupt
2020-03-11 09:53:06 +11:00
Andrew Tridgell
bdef7d7158
HAL_ChibiOS: fixed default fast sampling on CubeOrange and Durandal
2020-02-05 12:48:51 +11:00
Andrew Tridgell
d422825715
HAL_ChibiOS: removed per-board AP_FEATURE_RTSCTS and AP_FEATURE_SBUS_OUT
...
not needed any more
2019-12-18 17:18:44 +11:00
Andy Piper
16d2dd4e2d
AP_HAL_ChibiOS: specify Durdanal IMUs so that ordering is correct
2019-12-08 17:23:20 +11:00
Andrew Tridgell
e820219202
HAL_ChibiOS: changed optimisation of higher end boards to -O2
...
-O3 does not seem to be a win, and takes up a lot more flash
2019-09-28 08:57:26 +10:00
Andrew Tridgell
72494788f7
HAL_ChibiOS: convert more boards to use BARO specifier
2019-08-28 06:54:11 +10:00
Andrew Tridgell
4fca69c5e9
HAL_ChibiOS: renamed Pixhawk6 to Durandal
...
new name for FC from Holybro
2019-08-01 14:11:06 +10:00