Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
47,884 Commits 71 Branches 509 Tags 717 MiB
Commit Graph

47884 Commits

Author SHA1 Message Date
Andy Piper 7c213a8bbf AP_Motors: move AP_MotorsUGV here 
add singleton and motor_mask to AP_MotorsUGV
 2021-06-07 20:16:26 +09:00
Andrew Tridgell 96577b47f0 GCS_MAVLink: removed perf counters 2021-06-07 14:29:27 +10:00
Andrew Tridgell f6ec48e0e2 AP_Scheduler: removed perf counters 2021-06-07 14:29:27 +10:00
Andrew Tridgell 50e7c81f46 AP_Logger: removed perf counters 2021-06-07 14:29:27 +10:00
Andrew Tridgell dfc4b37df1 AP_HAL_Linux: removed perf counters 2021-06-07 14:29:27 +10:00
Andrew Tridgell 7c5c805381 AP_HAL: removed perf counters 2021-06-07 14:29:27 +10:00
Andrew Tridgell 684e32068b AP_Compass: removed perf counters 2021-06-07 14:29:27 +10:00
Peter Barker d6348a0786 AP_NavEKF3: remove getBodyFrameOdomDebug 
Not used after we moved logging to be within AP_NavEKF3
 2021-06-07 09:28:52 +10:00
Peter Barker dd3ab29b2f AP_NavEKF3: remove getFilterGpsStatus 
Not needed after we moved logging into NavEKF3
 2021-06-07 09:25:53 +10:00
Peter Barker aaae7bda6b GCS_MAVLink: provide compatability with bad integer-stored radii 2021-06-06 11:41:30 +10:00
Peter Barker 76408c77dd AC_Fence: provide compatability with bad integer-stored radii 2021-06-06 11:41:30 +10:00
Peter Barker e3db030d7a AC_Fence: load and store fence radii in floats 
These were simply being cast down to integers
 2021-06-06 11:41:30 +10:00
Peter Barker e644a9dda8 StorageManager: add read_float and write_float 2021-06-06 11:41:30 +10:00
Andrew Tridgell 67fea9f2f8 HAL_ChibiOS: fixed DMA disable on contention 
this fixes a problem with the automatic DMA disable on DMA contention
in UARTs. This fixes issue #14581

the problem was that while tx_dma_enabled was correctly set to false,
it would keep looping inside write_pending_bytes_DMA() if the data
arrived in the write buffer at a faster rate than it could be sent
out, which did happen with a mavlink stream rate of 4Hz. This means it
kept using DMA even with tx_dma_enabled set to false. The result was
that the automatic flow control code never got a chance to run and we
didn't switch back to non-DMA for these low baudrate contended UARTs
 2021-06-05 19:03:03 +10:00
Andrew Tridgell 3128d71aac HAL_ChibiOS: display uart even when not initialised 
don't rely on thread allocation for uart info display
 2021-06-05 18:52:33 +10:00
Andrew Tridgell c34d8e80e9 HAL_ChibiOS: fixed serial info indexing for EMPTY uarts 2021-06-05 18:52:33 +10:00
Andrew Tridgell 6fab8feeae HAL_ChibiOS: implement uart_info per-uart 
this allows for some UARTs to be of EMPTY type
 2021-06-05 18:52:33 +10:00
Andrew Tridgell 23cf128541 HAL_Empty: implement uart_info() 2021-06-05 18:52:33 +10:00
Andrew Tridgell d8a6d9c5c4 AP_HAL: added uart_info() method 2021-06-05 18:52:33 +10:00
Andrew Tridgell 135a4d2c83 HAL_ChibiOS: fixed order and labelling of @SYS/uarts.txt 2021-06-05 18:52:33 +10:00
Andrew Tridgell f970735d47 Plane: fixed handling of NAV_LOITER_TIME with Q_GUIDED_MODE=1 
and made logic of in_vtol_mode() easier to read
 2021-06-05 13:05:30 +10:00
Andrew Tridgell aa904d6bbc Plane: fixed guided mode handling with new approach code 
ensure we treat guided approach as not a vtol mode
 2021-06-05 13:05:30 +10:00
Andrew Tridgell 71f207403e AP_Common: make angles in degrees end in _deg 
to make it obvious it is not radians
 2021-06-05 13:05:30 +10:00
Andrew Tridgell 1165fcab99 Plane: removed incorrect URL 2021-06-05 13:05:30 +10:00
Andrew Tridgell fd19ff3bea Plane: offset guided start point when using Q_GUIDED_MODE 2021-06-05 13:05:30 +10:00
Andrew Tridgell f15497c6a9 Plane: only do fwd thrust loss detection in SLT vehicles 
on tilt rotors and tailsitters it doesn't make sense to switch to
POSITION1 at low speeds when in APPROACH
 2021-06-05 13:05:30 +10:00
Andrew Tridgell 0232fa7456 Plane: cope with fwd thrust loss in Q approach 
if throttle is saturated and descending and low airspeed then declare
thrust loss
 2021-06-05 13:05:30 +10:00
Andrew Tridgell fbf5083e6a Plane: avoid transition in QRTL 
if close to home and already in a VTOL mode then don't transition
 2021-06-05 13:05:30 +10:00
Andrew Tridgell 3bb840f794 Plane: implement slow descent in QRTL approach 
this approaches in QRTL at ALT_HOLD_RTL alt, then descends to
Q_RTL_ALT close to the destination
 2021-06-05 13:05:30 +10:00
Andrew Tridgell eba1d499d4 AP_SpdHgtControl: added get_max_sinkrate() 2021-06-05 13:05:30 +10:00
Andrew Tridgell a789bb372b AP_TECS: added get_max_sinkrate() API 2021-06-05 13:05:30 +10:00
Andrew Tridgell 77ee922473 Plane: fixed NAV_CONTROLLER_OUTPUT in QRTL 2021-06-05 13:05:30 +10:00
Andrew Tridgell 245ded2f2d Plane: fixed handling of loss of fwd thrust in QRTL 2021-06-05 13:05:30 +10:00
Andrew Tridgell a895bc1846 HAL_ChibiOS: reduce flash on VRBranin-v51 2021-06-05 13:05:30 +10:00
Andrew Tridgell c7a14a5da1 Plane: disable cross-track in Q approach modes and QRTL 2021-06-05 13:05:30 +10:00
Andrew Tridgell 46722500b0 Plane: default Q_TRANS_DECEL to 6 for tailsitters 2021-06-05 13:05:30 +10:00
Andrew Tridgell a7b809d5d4 Plane: added approach and airbrake options 
this defaults VTOL landings to have an approach and airbraking stage,
allowing for more efficient landings. Can be disabled by setting
Q_OPTIONS bit 16
 2021-06-05 13:05:30 +10:00
Andrew Tridgell 154ae64e63 AP_Math: support either polarity in linear_interpolate() 2021-06-05 13:05:30 +10:00
Andrew Tridgell ddfc9e8300 Plane: improved quadplane auto-land into wind 
when heading is strong we need to ramp up pitch limit slowly to
prevent a big dive
 2021-06-05 13:05:30 +10:00
Andrew Tridgell b4992cc226 Plane: added accessors for poscontrol state 
allows for time since state entered
 2021-06-05 13:05:30 +10:00
Andrew Tridgell f1f7f01300 Plane: slave fixed wing desired rate to multicopter desired rate 
this ensures that the two rate controllers don't fight each other when
in a VTOL mode
 2021-06-05 13:05:30 +10:00
Peter Barker d77d258442 AP_Math: add tests for the sqrt_controller 2021-06-04 23:00:19 +10:00
Peter Barker 0bd9610687 autotest: add trivial test for BodyFrameOdom 2021-06-04 15:09:51 +10:00
Peter Barker 584e24d613 Tools: build mRoControlZeroClassic and mRoControlZeroH7{,-bdshot} on build server 2021-06-04 14:39:56 +10:00
yaapu c615706971 AP_Frsky_Telem: added a parameter to set the default FRSky sensor ID for passthrough telemetry 2021-06-03 13:58:55 +10:00
honglang 847ce3b311 AP_HAL_ChibiOS: CUAV X7/Nora: use icm42688 instead of bmi088 2021-06-03 13:57:27 +10:00
Randy Mackay e8947dfb47 Tools: reduce copter autotest rate yaw P and I gains 
affects quad, hexa, octa, octa-quad, deca, tri, y6, dodeca-hexa
 2021-06-03 12:20:43 +09:00
Randy Mackay 3f77c52720 AP_BoardConfig: minor change to BRD_IMU_TARGTEMP param desc 
Users should reboot if the param is changed to -1 because the heater pin could be left on
 2021-06-02 18:17:59 +10:00
yaapu b14dcf1df5 Tools:autotest: updated FRSky SPort test to use new 2 byte data IDs 2021-06-02 17:33:15 +10:00
yaapu 870c280946 AP_Frsky_Telem: upgraded SERIAL_PROTOCOL 4 telemetry to 2 bytes data IDs 
This upgrades standard SPort telemetry from older 1byte IDs to newer 2bytes IDs.

Older 1 byte data IDs are not supported by the FRSky ETHOS ecosystem so this
migration is required to allow ArduPilot to seamlessly work with ETHOS.
This migration requires users to do a new sensor discovery in OpenTX.
 2021-06-02 17:33:15 +10:00