Andrew Tridgell
b64ab07ca4
Plane: added STAB_PITCH_DN_CD parameter
...
this adds some down trim when at throttle levels below the trim
throttle in FBWA mode.
defaults to 200 centi-degrees. I may adjust based on flight tests
2014-08-03 17:17:20 +10:00
Matthias Badaire
57253fc2ee
Rover: Add SERIAL2_PROTOCOL for GCS and FRSky telemtry
...
This allows selection of protocol type on telem2. The default is MAVLink, but can be selected as FrSky protocol
2014-07-29 17:08:20 -07:00
Andrew Tridgell
d18c00d6fc
Plane: split up altitude handling
...
this creates altitude.pde for altitude handling, getting ready to add
terrain following
2014-07-24 21:50:19 +10:00
Andrew Tridgell
ea086fa79c
Plane: added MAV_CMD_DO_INVERTED_FLIGHT support
...
allows for mission control over inverted flight
2014-06-05 16:12:10 +10:00
Andrew Tridgell
1e2b644b1b
Plane: fix for HAL_GPIO_*
2014-06-02 10:42:36 +10:00
Andrew Tridgell
286479ee93
Plane: prevent stalled takeoff with bad TKOFF_TDRAG_SPD1
...
go to level pitch if pitch rises by 10 degrees
2014-05-23 07:30:59 +10:00
Andrew Tridgell
d87619c2f1
Plane: added 4 new parameters to control takeoff
...
this gives flexible control for taildragger takeoff
2014-05-23 07:30:58 +10:00
Andrew Tridgell
511e8beaed
Plane: updates for new GCS_MAVLink API
2014-05-21 12:45:25 +10:00
Andrew Tridgell
69b5f352f6
Plane: prevent a bad glide slope when first entering auto
...
we need to ensure that prev_WP_loc is not used as it could be
completely different from current_loc. As a precuation, this also sets
up next_WP_loc so that when the set_next_WP() is first called that
prev_WP_loc is set to current_loc
2014-05-18 16:14:11 +10:00
Andrew Tridgell
bd09d8551d
Plane: use setup_uart()
2014-05-16 11:44:53 +10:00
Andrew Tridgell
ccc8a6a6ed
Plane: use MIS_AUTORESET when entering AUTO mode
2014-04-29 11:46:06 +10:00
Andrew Tridgell
0de41f0ce1
Plane: set AHRS vehicle class
2014-04-21 18:13:12 +10:00
Andrew Tridgell
1bce4239a3
Plane: added AUTOTUNE flight mode
...
this is just like FBWA, but with automatic roll/pitch tuning
2014-04-12 14:12:14 +10:00
Andrew Tridgell
e19341ca32
Plane: convert to new GPS driver API
2014-04-01 06:38:24 +11:00
Michael Day
25f23cf16c
Plane: Sends MAV_SYS_STATUS_GEOFENCE and also allows GCS to enable/disable fence.
2014-03-27 09:26:20 +11:00
Andrew Tridgell
e8b9f22b01
Plane: updates for GPS changes
2014-03-24 12:04:31 +11:00
Andrew Tridgell
0d39f354b0
Plane: use new common MAVLink code
2014-03-19 12:13:38 +09:00
Andrew Tridgell
4bf140aeac
Plane: make next_WP and prev_WP be locations
...
having a command ID in them doesn't really make sense
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2014-03-19 12:12:39 +09:00
Randy Mackay
982ce56d2b
Plane: bug fix to set_current_cmd
...
When set_current_cmd mavlink message is received, resume mission only if
the mission has completed.
Stop mission when vehicle leaves AUTO mode.
2014-03-19 12:12:28 +09:00
Andrew Tridgell
4992e2e2cf
Plane: use mission.resume() not mission.start()
2014-03-19 12:12:19 +09:00
Randy Mackay
36a5287de5
Plane: call mission.init during startup
2014-03-19 12:11:49 +09:00
Randy Mackay
9446e9fd2e
Plane: integrate AP_Mission library
2014-03-19 12:10:58 +09:00
Andrew Tridgell
65ae9663d4
Plane: set 2nd GPS as secondary
2014-03-08 21:48:12 +11:00
Andrew Tridgell
07826096a2
Plane: support a 2nd GPS
2014-02-26 09:24:23 +11:00
Andrew Tridgell
8a4289b56f
Plane: remove unused variables
...
thanks to Mike McCauley
2014-02-24 18:49:14 +11:00
Andrew Tridgell
33851030a4
Plane: use ahrs.get_armed()
2014-02-19 10:53:26 +11:00
Andrew Tridgell
11337ab2df
Plane: updates for AHRS holding home position
2014-02-15 05:29:47 +11:00
Andrew Tridgell
043c80dbe6
Plane: use new board_voltage() method
2014-02-14 21:50:59 +11:00
Andrew Tridgell
e42a10a764
Plane: allow printing of GUIDED mode in logs
2014-02-02 14:04:36 +11:00
Andrew Tridgell
cdd36b2c41
Plane: use AP_ServoRelayEvents library
2014-01-20 17:06:29 +11:00
Andrew Tridgell
d3adf4c32c
Plane: enable AP_BoardConfig
2014-01-20 17:06:28 +11:00
Andrew Tridgell
cf09fef1db
Plane: prevent log corruption when new log started
2014-01-14 14:29:14 +11:00
Andrew Tridgell
a15336079e
Plane: start logging when first needed
2014-01-14 13:51:49 +11:00
Andrew Tridgell
8755747da0
Plane: only log when armed by default
...
use safety switch if arming not enabled
2014-01-14 13:07:43 +11:00
Andrew Tridgell
72473e4317
Plane: use AP_HAL available_memory() call
2013-12-28 14:51:37 +11:00
Andrew Tridgell
7ffbed24cc
Plane: initialise scheduler callback after logging
...
this could cause log corruption otherwise
2013-12-28 10:24:46 +11:00
Andrew Tridgell
263f3b116b
Plane: added FS_GCS_ENABL==2 option
...
this allows GCS failsafe when the GCS isn't getting updates from the
aircraft
2013-12-20 11:39:00 +11:00
Andrew Tridgell
8b7fe3cf50
Plane: changes for new DataFlash API
2013-12-17 11:51:36 +11:00
Andrew Tridgell
5a0cb5dea4
Plane: added sonar logging to dataflash
2013-11-28 21:49:27 +11:00
Andrew Tridgell
8383abc1fe
Plane: added SERIAL2_BAUD and rename SERIAL3_BAUD to SERIAL1_BAUD
2013-11-26 13:00:03 +11:00
Andrew Tridgell
457183b6f5
Plane: cope with uartD being NULL
2013-11-23 21:44:45 +11:00
Andrew Tridgell
2fa5e6310d
Plane: added 3rd telemetry stream on platforms that have it
...
this generalises the gcs object usage
2013-11-23 19:29:22 +11:00
Andrew Tridgell
7e10811673
Plane: send firmware and git version in tlog
2013-11-09 10:09:20 +11:00
Andrew Tridgell
fe3943e686
Plane: faster startup
...
make it less likely to send wrong INS_PRODUCT_ID, plus don't waste as
much time
2013-11-02 21:41:11 +11:00
Andrew Tridgell
035ac3800a
Plane: use G_Dt for acro angle integration
...
also cleanup some other uses of performance timing
2013-10-12 13:30:27 +11:00
Andrew Tridgell
eef693f243
Plane: removed some compat code
...
fixes warnings
2013-09-30 21:06:43 +10:00
Andrew Tridgell
444d053dc2
Plane: enable Oilpan and BMP085 on Linux
2013-09-29 01:02:05 +10:00
Andrew Tridgell
b28a4f21f2
Plane: fixed uartA baud rates for APM1
2013-09-21 09:30:29 +10:00
Andrew Tridgell
21a4da0d29
Plane: removed flash_leds() calls
2013-09-19 18:38:28 +10:00
Andrew Tridgell
4bd6b2f428
Plane: use new usb_connected() function
2013-09-19 16:23:58 +10:00