Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
33,624 Commits 71 Branches 509 Tags 716 MiB
Commit Graph

198 Commits

Author SHA1 Message Date
Andrew Tridgell 820b2386c0 APM_Control: halve the default pitch D term for planes 
this is based on feedback from the 3.9.1 release
 2018-09-14 07:32:46 +10:00
Andrew Tridgell 6fe07e5702 APM_Control: raised default PID gains for roll/pitch 2018-08-17 17:01:56 +10:00
Ebin 30b3d63e8a APM_Control: New default PID values for balance bots 2018-07-06 19:41:09 +10:00
Ebin ce182fd307 APM_Control: fixed test condition in AR_AttutudeControl.cpp 2018-07-06 19:41:09 +10:00
Ebin 97a260a980 APM_Control: get_throttle_out_from_pitch() accepts dt as argument 2018-06-28 21:55:20 +09:00
Ebin 657ff06380 APM_Control: added balancing function for BalanceBot 2018-06-28 21:55:20 +09:00
Randy Mackay 5e7b37f0b2 AR_AttitudeControl: remove constraint on steering output 2018-06-12 17:44:10 +09:00
Ammarf b614ca9b75 AR_AttitudeControl: disable limits when _ACCEL_MAX is zero 2018-06-11 08:54:59 +09:00
Randy Mackay 67475a9eaa AR_AttitudeControl: reset turn-rate I term if not run for 0.2sec 2018-06-01 15:06:13 +09:00
disgruntled-patzer 2c41db9e4d AP_RollController.cpp: Updated description of ArduPlane Roll Controller for accuracy 
AP_RollController's get_servo_out function does not return an elevator deflection as was previously described in the function comments.
Instead, it should return an aileron deflection. Thus, the function description should be updated to reflect this more accurately
 2018-05-30 09:46:08 +09:00
Randy Mackay e691b680ca AR_AttitudeControl: add speed-control-active method 
allows caller check if speed controller if active
also consolidated other methods to use this check to reduce a little bit of duplicate code
 2018-05-29 16:37:31 +09:00
Randy Mackay 3b71d0360a AR_AttitudeControl: const get_decel_max and get_stopping_distance 2018-05-29 16:37:31 +09:00
Michael du Breuil 84b1a6a58b APM_Control: Supress some compilier warnings about strncpy 2018-05-29 00:10:40 +01:00
Randy Mackay a7fbfe7767 AR_AttitudeControl: caller provides dt instead of calculated internally 
This allows the vehicle's main loop rate to be used instead of an internally calculated dt which suffers from jitter
 2018-05-24 11:06:20 +09:00
Randy Mackay c032095c80 AR_AttitudeControl: reduce default accel max to 2m/s/s 2018-05-24 11:06:20 +09:00
Randy Mackay 856d592b1d AR_AttitudeControl: accel limit stops 2018-05-24 11:06:20 +09:00
Ammarf 832778e471 AR_AttitudeControl: add separate decel limit 2018-05-23 17:17:29 +09:00
Randy Mackay f6c06496e2 AR_AttitudeControl: fix accel limiting 2018-05-21 10:28:56 +09:00
Ammarf a9ee949c32 AR_AttitudeControl: limit desired steering rate 2018-05-21 09:48:43 +09:00
Randy Mackay 56672c1c28 AR_AttitudeControl: fix get_steering_out_rate use of max turn rate and acceleration 2018-05-10 20:37:28 +09:00
Randy Mackay 9feaf9cfdd AR_AttitudeControl: const some internal variables 
non-functional change
 2018-05-10 20:37:28 +09:00
Randy Mackay fa76a7c904 AR_AttitudeControl: get-steering-out-lat-accel uses negative speeds 2018-05-10 08:02:13 +09:00
Randy Mackay 5563691bd1 AR_AttitudeControl: assume positive steering output rotates vehicle clockwise 
also remove steering scaling by speed which has been moved to AR_MotorsUGV
 2018-05-10 08:02:13 +09:00
Randy Mackay ce44326ba8 AR_AttitudeControl: fix get_steering_out_heading while reversing 2018-05-06 16:58:00 +09:00
Randy Mackay 0f9b679e98 AR_AttitudeControl: increase angle err P and reduce steering accel max defaults 2018-04-26 14:16:22 +09:00
Randy Mackay 3f1f68b130 AR_AttitudeControl: support vectored thrust 
steering output is not scaled for speed
steering integrator does not build up at low speed
 2018-04-24 19:57:19 +09:00
Randy Mackay 9c2da896b9 AR_AttitudeControl: get_throttle_out_stop only stops once desired speed reaches zero 
this reduces the final jerk to a when transitioning from forward to reverse and in cases where ATC_ACCEL_MAX is small
 2018-04-24 12:24:53 +09:00
Randy Mackay 365e1030db AR_AttitudeControl: separate speed limiting to new method 
This allows the desired speed limiting (by acceleration) to be done before the speed-to-throttle PID controller is run.
This is required so the avoidance calls (which work on the desired speed) can be run after limiting but before the PID controllers
 2018-04-24 12:24:53 +09:00
Randy Mackay 23ed735304 AR_AttitudeControl: reduce default steering I gain to 0.2 
Also reduce default filter from 50hz to 10hz
 2018-04-19 16:29:12 +09:00
Daniel Widmann 27234f78c6 AR_AttitudeControl: Allow using steer rate control for skid steer rovers without GPS 2018-04-13 09:12:03 +09:00
Randy Mackay a8857726d1 AR_AttitudeControl: replace get_steering_out_angle_error with heading 
internally uses AHRS's heading to determine angle error so overally a non-functional change
 2018-04-05 12:14:59 +09:00
Randy Mackay e6f8021519 AR_AttitudeControl: add angular accel and rate limits 
This limits the change in desired turn rate to reduce impossible requests which should help avoid overshoot
Also add rotation rate limit to turn-rate controller
 2018-04-05 12:14:59 +09:00
Randy Mackay 57f2eb6853 AR_AttitudeControl: minor comment fix 2018-03-31 14:47:30 +09:00
Peter Barker e2de9d62cd APM_Control: use ins singleton 2018-03-16 00:37:35 -07:00
Randy Mackay 89725a7aa5 AR_AttitudeControl: minor comment fix 
non-functional change
 2018-03-15 09:58:27 +09:00
Randy Mackay d139f0e28e AR_AttitudeControl: add get_stopping_distance 2018-03-14 12:40:04 +09:00
Randy Mackay 54d8a4852f AR_AttitudeControl: reduce steer rate P default to 0.2 2018-03-09 13:17:38 +09:00
Randy Mackay 2aeda48512 AR_AttitudeControl: minor arg name fix 
non-functional change
 2018-02-09 17:36:21 +09:00
Randy Mackay 5e90cdbf59 AR_AttitudeControl: parameter desc range increase 
new steering controller can use higher FF and zero P
 2018-01-12 08:15:34 +09:00
Randy Mackay 1bb18bc941 AR_AttitudeControl: get_throttle_out_speed uses timeout definition 2018-01-05 13:33:21 +09:00
Randy Mackay 4ac5ef3a13 AR_AttitudeControl: allow filter to be zero 
Also increase default filter to 50hz
 2018-01-05 13:33:21 +09:00
Randy Mackay 16d3e5c00d AR_AttitudeControl: add feed foward for speed and steering rate control 2018-01-05 13:33:21 +09:00
Randy Mackay 40bb2b0ad9 AR_AttitudeControl: set throttle speed pid dt 2018-01-05 13:33:21 +09:00
Randy Mackay 9930550cfc AR_AttitudeControl: lengthen timeout to 200ms 
This is required because occasionally the turn rate controller can be disabled for just over 100ms as new navigation commands are loaded
 2018-01-05 13:33:21 +09:00
Randy Mackay a2b1807ca0 AR_AttitudeControl: fix turn-rate controller timeout 2018-01-05 13:33:21 +09:00
Peter Barker e0c586876b APM_Control: use GPS singleton 2017-12-27 00:58:02 +00:00
Andrew Tridgell 1dac512567 APM_Control: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Randy Mackay cabced82f1 AR_AttitudeControl: fix parameter descriptions 2017-12-11 17:01:18 +09:00
Michael Oborne 78f732c380 AR_AttitudeControl: fix parameter docs 2017-12-11 08:35:33 +09:00
Randy Mackay 744f4baf22 AR_AttitudeControl: add parameter description increment 2017-12-09 16:23:25 +09:00