Commit Graph

174 Commits

Author SHA1 Message Date
Peter Barker 0f49b7f3ab AP_HAL: move defaulting of HAL_DSHOT_ALARM into hwdef 2022-09-15 09:18:04 +10:00
Siddharth Purohit 5bc65bb54e AP_HAL: set CANFrame max data length based on CANFD availability 2022-03-11 18:13:54 +11:00
Siddharth Purohit 153834465b AP_HAL: add HAL_CANFD_SUPPORTED define 2022-03-11 18:13:54 +11:00
Andrew Tridgell b248fdfcbb AP_HAL: avoid including hal.h in generic code 2022-02-22 12:13:19 +11:00
Peter Barker f5526d095b AP_HAL: remove HAL_COMPASS_DEFAULT define
this doesn't actually allow you to specify a default, despite the name
and a couple of hwdefs trying to use it that way.

This would have stopped being useful when we did the
compass-prority-table stuff - or before.
2022-02-01 12:10:38 +11:00
Andrew Tridgell 3b70b3e7a7 AP_HAL: check for existing HAL_STORAGE_SIZE 2022-01-11 11:33:30 +11:00
Willian Galvani dc856f10eb AP_HAL_Linux: set internal/external i2c bus masks for Navigator
This fixes an issue where the internal Compass was being re-detected
as an external one, then as an internal but with wrong orientation
2022-01-06 14:45:42 -05:00
Willian Galvani 725765c1cb AP_HAL: fix navigator ak09915 orientation 2022-01-03 15:05:47 -03:00
Willian Galvani d3e3922776 AP_HAL: Add HAL_PROBE_EXTERNAL_I2C_COMPASSES to Navigator 2022-01-03 15:05:47 -03:00
Peter Barker f50d48f005 AP_HAL: tidy set/get of hw RTC 2021-12-06 12:58:43 +11:00
Patrick José Pereira 176c70b5ff AP_HAL: Update Navigator board to R4
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-11-10 18:11:34 -03:00
Buzz ecfdd80bc7 AP_HAL: new HAL layer for esp32
see libraries/AP_HAL_ESP32/README.md for more.

Author: Charles Villard <charlesvillard10@gmail.com>
Author: Buzz <davidbuzz@gmail.com>
2021-11-01 17:40:31 +11:00
Willian Galvani 34b42d8252 AP_HAL: Navigator: set HAL_BARO_EXTERNAL_BUS_DEFAULT to 6
This is the bus exposed in the board for external sensors.
This is required as HAL_Linux doesn't probe all i2c buses.
2021-10-11 17:57:52 -03:00
Peter Barker 102b1c6879 AP_HAL: allow for selection of Storage backend type at runtime 2021-10-05 10:16:54 +11:00
Willian Galvani fe72640955 AP_HAL: remove BATT_ settings, they belong in AP_BattMonitor_Analog.h 2021-09-14 09:21:42 +10:00
Mohammad Hefny 5eb28be8e6 AP_HAL_Linux: define board features on Linux module 2021-09-10 08:17:37 +10:00
Andrew Tridgell f60330c4ef AP_HAL: allow for double EKF build 2021-07-10 07:20:41 +10:00
Peter Barker dddd0d6a14 AP_HAL: remove HIL support 2021-06-15 09:47:31 +10:00
Andrew Tridgell 606c248e69 AP_HAL: fixed build on boards with no PWM
this impacts mRoNexus builds
2021-06-02 15:39:30 +10:00
Andy Piper 4f547d2acc AP_HAL: allow motor poles to be recorded
enable ESC telemetry for SITL
2021-05-12 17:01:11 +10:00
Andy Piper 3428cbf993 AP_HAL: add dshot command codes for beeps, leds and motor control
allow more than one type of ESC for dshot commands
add support for checks around active ESCs
allow dshot alarm to be disabled
allow prioritized dshot commands
2021-05-05 17:41:24 +10:00
Jacob Walser f7da853adb AP_HAL: update hardware definitions for navigator r3 2021-04-07 15:08:18 -04:00
Jacob Walser 421638453f AP_HAL: update Notify LED hardware for navigator r3 2021-04-07 15:08:18 -04:00
Andrew Tridgell a9f8c9517c AP_HAL: added vnav linux target 2021-01-20 10:06:45 +11:00
Andrew Tridgell 6ca68bfba3 AP_HAL: enable 32k storage on SITL 2021-01-16 06:47:10 +11:00
Tom Pittenger 6630645915 AP_HAL: ap_periph should disable HAL_SUPPORT_RCOUT_SERIAL by default 2020-12-09 07:53:09 -08:00
Tom Pittenger 089f3aa349 AP_HAL: allow hwdef to define HAL_SUPPORT_RCOUT_SERIAL - must be disabled for AP_Periph 2020-11-25 14:20:53 +11:00
mhefny 1200d0e2f8 AP_HAL: add PROBE_IMU_I2C2 to linux.h 2020-10-06 09:27:26 -07:00
Siddharth Purohit fa0f1e4c71 AP_HAL: add CANIface HAL, replace uavcan dependent one 2020-08-19 17:31:09 +10:00
Siddharth Purohit 697e4141cb AP_HAL: add common Event interface 2020-08-19 17:31:09 +10:00
Peter Barker 26666b4b3d AP_HAL: move battery type enumeration out of parameters object 2020-08-11 13:21:52 +10:00
Andrew Tridgell efe78fe3e1 AP_HAL: allow SITL to emulate 3 different types of flash storage 2020-04-14 10:02:51 +10:00
Andrew Tridgell e1792f89db AP_HAL: fixed default HAL_STORAGE_SIZE for flash storage 2020-04-14 10:02:51 +10:00
Peter Barker 09562e1f13 AP_HAL_Linux: use constants for high/low rather than defines, like ChibiOS
These are really bad defines to have hanging around for general use.
2020-03-03 10:46:06 +11:00
Willian Galvani 4afdff746e AP_HAL: Fix Navigator orientation
The Rev2 prototype board had the IMU rotated
2020-02-04 22:47:16 -05:00
Andrew Tridgell f683741a9c AP_HAL: make all semaphores recursive
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
2020-01-19 20:19:30 +11:00
Patrick José Pereira dc44a17c46 AP_HAL: Add navigator board
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2020-01-16 08:01:54 +11:00
Andrew Tridgell 2d00298070 AP_HAL: added HAL_MEM_CLASS for amount of memory 2019-10-01 09:29:55 +10:00
Andrew Tridgell 43e011c7a8 AP_HAL: convert Linux compass specification to new probe list
this avoids the special handling in AP_Compass library
2019-09-04 16:27:47 +10:00
Andrew Tridgell 9d94598235 AP_HAL: convert linux boards to use baro probe list 2019-08-28 06:54:11 +10:00
Andrew Tridgell 96180018fb AP_HAL: convert HAL_Linux to use HAL_INS_PROBE_LIST
makes for much simpler addition of new boards, especially with more
than one IMU
2019-08-28 06:54:11 +10:00
Andrew Tridgell 5ffb8bb546 AP_HAL: enable GPIO scripting on the Disco 2019-07-06 09:02:54 +10:00
Vincent 3177d24429 AP_HAL: Make linux hardware define more readable 2019-06-04 10:00:09 +10:00
Andrew Tridgell 20d762293d AP_HAL: remove more px4 remnants 2019-02-27 20:32:37 +11:00
Andrew Tridgell c04f1180c9 AP_HAL: removed F4Light 2019-01-21 21:57:21 +11:00
mirkix 506da9ac42 AP_HAL: enable UAVCAN for bbbmini, blue and pocket 2019-01-21 08:08:59 +11:00
Andrew Tridgell 4cfb1b04ad AP_HAL: define HAL_BOARD_STORAGE_DIRECTORY for sitl, px4 and chibios 2018-11-29 16:36:29 +11:00
Andrew Tridgell e629845f00 AP_HAL: minimize features on px4-v1 2018-11-26 13:29:40 +11:00
Michael du Breuil 9a9e715af8 AP_HAL: Define HAL_HAVE_SERVO_VOLTAGE 2018-11-12 23:29:04 +00:00
Andrew Tridgell 6c6dabc33c AP_HAL: set default batt monitoring for bebop and disco 2018-10-31 20:30:35 +11:00