Peter Barker
|
05e5d2e6bb
|
AP_SerialManager: move serial port init of Volz protocol into Volz library
|
2024-12-17 09:14:08 +11:00 |
Peter Barker
|
061097ac31
|
AP_SerialManager: add a method to set the default baud
this allows a library to change what the GCS will see in the parameter for a serial port's baud rate.
|
2024-12-17 09:14:08 +11:00 |
olliw42
|
4616fec1be
|
AP_SerialManager: RegisteredPort, add bytes_per_second/baudrate methods
|
2024-10-08 10:42:21 +11:00 |
Peter Barker
|
75073427a6
|
AP_SerialManager: avoid use of AP_HAL.h in config file
too easy to create loops with this
|
2024-09-24 11:59:13 +10:00 |
Nicole Ashley
|
6f42acc01f
|
AP_SerialManager: Add serial protocol for i-BUS telemetry
|
2024-08-07 14:01:44 +10:00 |
Peter Barker
|
b65a5a904c
|
AP_SerialManager: tweak error message
|
2024-08-06 11:36:33 +10:00 |
Peter Barker
|
cbdbbf436c
|
AP_SerialManager: add warning iffrsky already configured
|
2024-08-06 09:46:56 +10:00 |
Iampete1
|
a551b4f296
|
AP_SerialManager: remove Volz port config
|
2024-07-11 13:07:24 +10:00 |
Thomas Watson
|
7fb65aece3
|
AP_SerialManager: allocate port IDs for scripting serial device ports
|
2024-06-27 12:00:18 +10:00 |
Andrew Tridgell
|
f532f7a9e6
|
AP_SerialManager: added docs for SERIALn_PROTCOL=PPP
|
2024-06-27 10:11:14 +10:00 |
Randy Mackay
|
19ea0944b1
|
AP_SerialManager: TYPE param renamed to MAVLink
|
2024-05-21 08:38:59 +10:00 |
Peter Barker
|
b623b8ec94
|
AP_SerialManager: move serial_manager parameters up to base class
|
2024-02-29 12:12:19 +11:00 |
Andrew Tridgell
|
c2be9f3c56
|
AP_SerialManager: default GPS baud to 230400
this is the most common baudrate
|
2024-02-29 11:00:40 +11:00 |
Andrew Tridgell
|
2cb177ef72
|
AP_SerialManager: added PPP serial type
|
2024-01-03 12:14:47 +11:00 |
Andrew Tridgell
|
6c2a7b8cfd
|
AP_SerialManager: expose HAVE_SERIAL_xxx in config
|
2023-12-27 05:13:14 -07:00 |
Thomas Watson
|
cc5b095d59
|
AP_SerialManager: clarify comment regarding legacy UART order
|
2023-12-19 06:53:15 +11:00 |
Luca Scheuer
|
4226f9e97c
|
AP_SerialManager: reserving serial protocol for Vertiq IQUART
|
2023-12-13 08:12:18 +09:00 |
Andrew Tridgell
|
e58e8b861d
|
AP_Serialmanager: added IMOUT uart type
# Conflicts:
# libraries/AP_SerialManager/AP_SerialManager.cpp
# libraries/AP_SerialManager/AP_SerialManager.h
|
2023-11-30 07:05:02 +11:00 |
Andrew Tridgell
|
65ffe713b4
|
AP_SerialManager: enable port registration for dronecan
|
2023-11-22 17:19:12 +11:00 |
Andrew Tridgell
|
e63a2250ca
|
AP_SerialManager: ensure registered ports are in sorted order
this avoids ordering issues if using both CAN and network serial ports
|
2023-11-22 17:19:12 +11:00 |
Andrew Tridgell
|
0ae5c9116c
|
AP_SerialManager: added AP_SerialManager_config.h
|
2023-11-22 17:19:12 +11:00 |
Andrew Tridgell
|
a54503ae12
|
AP_SerialManager: define port ranges for CAN serial ports
|
2023-11-22 17:19:12 +11:00 |
Ryan Friedman
|
213cba86af
|
AP_SerialManager: Add missing option for XRCE DDS
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
|
2023-11-20 08:40:06 +09:00 |
Andrew Tridgell
|
31fd43ba25
|
AP_SerialManager: fixed passthru with network ports
|
2023-11-17 10:54:24 -08:00 |
Andrew Tridgell
|
f9f07912e6
|
AP_SerialManager: added register_port() API
allows another library to register a UART driver for exposing via
AP_SerialManager APIs
|
2023-11-17 10:54:24 -08:00 |
Andy Piper
|
ad126cc96e
|
AP_SerialManager: only enable configuration ports that are available
|
2023-09-26 11:31:08 +10:00 |
Andrew Tridgell
|
a6055033ab
|
AP_SerialManager: removed set_blocking_writes_all
|
2023-07-12 17:06:02 +10:00 |
Andy Piper
|
993da19f27
|
AP_SerialManager: check for incorrect usage of old HAL_SERIALx_PROTOCOL
|
2023-07-07 16:55:26 +10:00 |
Randy Mackay
|
c41d5f4ff6
|
AP_SerialManager: improve OPTIONS desc for Swap bit
|
2023-05-17 17:34:10 +10:00 |
Randy Mackay
|
e672a75776
|
AP_SerialManager: generalise SToRM32 serial protocol desc and enum
|
2023-05-17 17:34:10 +10:00 |
Peter Barker
|
8cfd9f8ef1
|
AP_SerialManager: consolidate AP_Periph serialmanager defaults
|
2023-05-16 10:16:10 +10:00 |
Peter Barker
|
530e665c4d
|
AP_SerialManager: add missing include for GCS
|
2023-05-16 09:16:37 +10:00 |
Peter Barker
|
ef657438fc
|
AP_SerialManager: add and use AP_RCPROTOCOL_ENABLED
|
2023-05-16 09:16:37 +10:00 |
Henry Wurzburg
|
b4f9992ab7
|
AP_SerialManager: normalize SerialManagers ports defaults to allow inclusion in hwdefs
|
2023-05-11 18:45:53 +10:00 |
Henry Wurzburg
|
ba6d467c9d
|
AP_SerialManager: allow SERIAL1 protocol to be hwdef defined
|
2023-04-08 14:02:29 -07:00 |
Ryan Friedman
|
d8e221b872
|
AP_SerialManager: Add enum for DDS over serial
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
Co-authored-by: Rhys Mainwaring <rhys.mainwaring@me.com>
Co-authored-by: Arsh Pratap <arshpratapofficial@gmail.com>
Co-authored-by: Andrew Tridgell <andrew@tridgell.net>
|
2023-03-22 09:22:36 +11:00 |
murata
|
0fedd83208
|
AP_SerialManager: Add 2Mbps for simulator
|
2023-01-03 12:52:07 +11:00 |
Peter Barker
|
798cc2633f
|
AP_SerialManager: implement parameter CopyFieldsFrom and use it
|
2023-01-03 11:08:43 +11:00 |
Henry Wurzburg
|
0a33799216
|
AP_SerialManager: move multiple RC input error to pre-arm failure
|
2022-10-25 11:34:13 +11:00 |
Andy Piper
|
6b602cefec
|
AP_SerialManager: only use the first defined serial port for RCIN
|
2022-10-18 11:20:25 +11:00 |
jackhong12
|
4a4f361a17
|
all: use CLASS_NO_COPY() macro
|
2022-10-04 11:23:04 +11:00 |
Henry Wurzburg
|
83a45661f1
|
AP_SerialManager: generalize EFI serial protocol name
|
2022-08-28 08:12:48 +10:00 |
xianglunkai
|
b728b8179d
|
AP_SerialManager:correct find_baudrate() function
|
2022-07-25 16:03:27 +10:00 |
Iampete1
|
ca9aa41dd1
|
AP_SerialManager: use set_and_defualt
|
2022-07-20 17:59:59 +10:00 |
Peter Barker
|
b958c3db70
|
AP_SerialManager: remove mavlink-specific methods from AP_SerialManager
|
2022-07-13 18:32:35 +10:00 |
Andy Piper
|
c541639e13
|
AP_SerialManager: add Tramp protocol
|
2022-07-13 18:22:34 +10:00 |
Peter Barker
|
8ab0c03ada
|
AP_SerialManager: eliminate get_mavlink_channel
there's no dependence on any SerialManager stuff when determining this. The protocol passed through was always mavlink...
|
2022-07-12 11:32:57 +10:00 |
murata
|
0245d0bae1
|
AP_SerialManager: Console output can be disabled
|
2022-05-17 09:53:06 +10:00 |
Stephen Dade
|
da4602b5d2
|
AP_SerialManager: Add support for High Latency MAVLink protocol
|
2022-03-03 14:56:15 +11:00 |
Andrew Tridgell
|
372e785a10
|
AP_SerialManager: moved uart declaration to cpp file
improves ccache efficiency
|
2022-02-23 12:36:59 +11:00 |