ardupilot/libraries/GCS_MAVLink/GCS_Common.cpp

// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-

/*
  Common GCS MAVLink functions for all vehicle types

   This program is free software: you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation, either version 3 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include "GCS.h"
#include <AP_AHRS/AP_AHRS.h>
#include <AP_HAL/AP_HAL.h>
#include <AP_OpticalFlow/AP_OpticalFlow.h>
#include <AP_Vehicle/AP_Vehicle.h>

extern const AP_HAL::HAL& hal;

uint32_t GCS_MAVLINK::last_radio_status_remrssi_ms;
uint8_t GCS_MAVLINK::mavlink_active = 0;
uint16_t GCS_MAVLINK::_parameter_count;

GCS_MAVLINK::GCS_MAVLINK() :
    waypoint_receive_timeout(5000)
{
    AP_Param::setup_object_defaults(this, var_info);
}

void
GCS_MAVLINK::init(AP_HAL::UARTDriver *port, mavlink_channel_t mav_chan)
{
    // sanity check chan
    if (mav_chan >= MAVLINK_COMM_NUM_BUFFERS) {
        return;
    }

    _port = port;
    chan = mav_chan;

    mavlink_comm_port[chan] = _port;
    initialised = true;
    _queued_parameter = NULL;
    reset_cli_timeout();
}


/*
  setup a UART, handling begin() and init()
 */
void
GCS_MAVLINK::setup_uart(const AP_SerialManager& serial_manager, AP_SerialManager::SerialProtocol protocol, uint8_t instance)
{
    // search for serial port

    AP_HAL::UARTDriver *uart;
    uart = serial_manager.find_serial(protocol, instance);
    if (uart == NULL) {
        // return immediately if not found
        return;
    }

    // get associated mavlink channel
    mavlink_channel_t mav_chan;
    if (!serial_manager.get_mavlink_channel(protocol, instance, mav_chan)) {
        // return immediately in unlikely case mavlink channel cannot be found
        return;
    }

    /*
      Now try to cope with SiK radios that may be stuck in bootloader
      mode because CTS was held while powering on. This tells the
      bootloader to wait for a firmware. It affects any SiK radio with
      CTS connected that is externally powered. To cope we send 0x30
      0x20 at 115200 on startup, which tells the bootloader to reset
      and boot normally
     */
    uart->begin(115200);
    AP_HAL::UARTDriver::flow_control old_flow_control = uart->get_flow_control();
    uart->set_flow_control(AP_HAL::UARTDriver::FLOW_CONTROL_DISABLE);
    for (uint8_t i=0; i<3; i++) {
        hal.scheduler->delay(1);
        uart->write(0x30);
        uart->write(0x20);
    }
    // since tcdrain() and TCSADRAIN may not be implemented...
    hal.scheduler->delay(1);
    
    uart->set_flow_control(old_flow_control);

    // now change back to desired baudrate
    uart->begin(serial_manager.find_baudrate(protocol, instance));

    // and init the gcs instance
    init(uart, mav_chan);
}

uint16_t
GCS_MAVLINK::_count_parameters()
{
    // if we haven't cached the parameter count yet...
    if (0 == _parameter_count) {
        AP_Param  *vp;
        AP_Param::ParamToken token;

        vp = AP_Param::first(&token, NULL);
        do {
            _parameter_count++;
        } while (NULL != (vp = AP_Param::next_scalar(&token, NULL)));
    }
    return _parameter_count;
}

/**
 * @brief Send the next pending parameter, called from deferred message
 * handling code
 */
void
GCS_MAVLINK::queued_param_send()
{
    if (!initialised || _queued_parameter == NULL) {
        return;
    }

    uint16_t bytes_allowed;
    uint8_t count;
    uint32_t tnow = AP_HAL::millis();

    // use at most 30% of bandwidth on parameters. The constant 26 is
    // 1/(1000 * 1/8 * 0.001 * 0.3)
    bytes_allowed = 57 * (tnow - _queued_parameter_send_time_ms) * 26;
    if (bytes_allowed > comm_get_txspace(chan)) {
        bytes_allowed = comm_get_txspace(chan);
    }
    count = bytes_allowed / (MAVLINK_MSG_ID_PARAM_VALUE_LEN + MAVLINK_NUM_NON_PAYLOAD_BYTES);

    // when we don't have flow control we really need to keep the
    // param download very slow, or it tends to stall
    if (!have_flow_control() && count > 5) {
        count = 5;
    }

    while (_queued_parameter != NULL && count--) {
        AP_Param      *vp;
        float value;

        // copy the current parameter and prepare to move to the next
        vp = _queued_parameter;

        // if the parameter can be cast to float, report it here and break out of the loop
        value = vp->cast_to_float(_queued_parameter_type);

        char param_name[AP_MAX_NAME_SIZE];
        vp->copy_name_token(_queued_parameter_token, param_name, sizeof(param_name), true);

        mavlink_msg_param_value_send(
            chan,
            param_name,
            value,
            mav_var_type(_queued_parameter_type),
            _queued_parameter_count,
            _queued_parameter_index);

        _queued_parameter = AP_Param::next_scalar(&_queued_parameter_token, &_queued_parameter_type);
        _queued_parameter_index++;
    }
    _queued_parameter_send_time_ms = tnow;
}

/**
 * @brief Send the next pending waypoint, called from deferred message
 * handling code
 */
void
GCS_MAVLINK::queued_waypoint_send()
{
    if (initialised &&
        waypoint_receiving &&
        waypoint_request_i <= waypoint_request_last) {
        mavlink_msg_mission_request_send(
            chan,
            waypoint_dest_sysid,
            waypoint_dest_compid,
            waypoint_request_i);
    }
}

void GCS_MAVLINK::reset_cli_timeout() {
    _cli_timeout = AP_HAL::millis();
}

void GCS_MAVLINK::send_meminfo(void)
{
    unsigned __brkval = 0;
    uint32_t memory = hal.util->available_memory();
    if (memory > 0xffff) {
        memory = 0xffff;
    }
    mavlink_msg_meminfo_send(chan, __brkval, memory);
}

// report power supply status
void GCS_MAVLINK::send_power_status(void)
{
#if defined(CONFIG_ARCH_BOARD_PX4FMU_V2) || defined(CONFIG_ARCH_BOARD_PX4FMU_V4)
    mavlink_msg_power_status_send(chan,
                                  hal.analogin->board_voltage() * 1000,
                                  hal.analogin->servorail_voltage() * 1000,
                                  hal.analogin->power_status_flags());
#endif
}

// report AHRS2 state
void GCS_MAVLINK::send_ahrs2(AP_AHRS &ahrs)
{
#if AP_AHRS_NAVEKF_AVAILABLE
    Vector3f euler;
    struct Location loc {};
    if (ahrs.get_secondary_attitude(euler)) {
        mavlink_msg_ahrs2_send(chan,
                               euler.x,
                               euler.y,
                               euler.z,
                               loc.alt*1.0e-2f,
                               loc.lat,
                               loc.lng);
    }
    AP_AHRS_NavEKF &_ahrs = reinterpret_cast<AP_AHRS_NavEKF&>(ahrs);
    if (_ahrs.get_NavEKF2().activeCores() > 0) {
        _ahrs.get_NavEKF2().getLLH(loc);
        _ahrs.get_NavEKF2().getEulerAngles(-1,euler);
        mavlink_msg_ahrs3_send(chan,
                               euler.x,
                               euler.y,
                               euler.z,
                               loc.alt*1.0e-2f,
                               loc.lat,
                               loc.lng,
                               0, 0, 0, 0);
    }
#endif
}

/*
  handle a MISSION_REQUEST_LIST mavlink packet
 */
void GCS_MAVLINK::handle_mission_request_list(AP_Mission &mission, mavlink_message_t *msg)
{
    // decode
    mavlink_mission_request_list_t packet;
    mavlink_msg_mission_request_list_decode(msg, &packet);

    // reply with number of commands in the mission.  The GCS will then request each command separately
    mavlink_msg_mission_count_send(chan,msg->sysid, msg->compid, mission.num_commands());

    // set variables to help handle the expected sending of commands to the GCS
    waypoint_receiving = false;             // record that we are sending commands (i.e. not receiving)
    waypoint_dest_sysid = msg->sysid;       // record system id of GCS who has requested the commands
    waypoint_dest_compid = msg->compid;     // record component id of GCS who has requested the commands
}

/*
  handle a MISSION_REQUEST mavlink packet
 */
void GCS_MAVLINK::handle_mission_request(AP_Mission &mission, mavlink_message_t *msg)
{
    AP_Mission::Mission_Command cmd;
    // decode
    mavlink_mission_request_t packet;
    mavlink_msg_mission_request_decode(msg, &packet);

    // retrieve mission from eeprom
    if (!mission.read_cmd_from_storage(packet.seq, cmd)) {
        goto mission_item_send_failed;
    }

    // convert mission command to mavlink mission item packet
    mavlink_mission_item_t ret_packet;
    memset(&ret_packet, 0, sizeof(ret_packet));
    if (!AP_Mission::mission_cmd_to_mavlink(cmd, ret_packet)) {
        goto mission_item_send_failed;
    }

    // set packet's current field to 1 if this is the command being executed
    if (cmd.id == (uint16_t)mission.get_current_nav_cmd().index) {
        ret_packet.current = 1;
    } else {
        ret_packet.current = 0;
    }

    // set auto continue to 1
    ret_packet.autocontinue = 1;     // 1 (true), 0 (false)

    /*
      avoid the _send() function to save memory, as it avoids
      the stack usage of the _send() function by using the already
      declared ret_packet above
     */
    ret_packet.target_system = msg->sysid;
    ret_packet.target_component = msg->compid;
    ret_packet.seq = packet.seq;
    ret_packet.command = cmd.id;

    _mav_finalize_message_chan_send(chan, 
                                    MAVLINK_MSG_ID_MISSION_ITEM,
                                    (const char *)&ret_packet,
                                    MAVLINK_MSG_ID_MISSION_ITEM_LEN,
                                    MAVLINK_MSG_ID_MISSION_ITEM_CRC);
    return;

mission_item_send_failed:
    // send failure message
    mavlink_msg_mission_ack_send(chan, msg->sysid, msg->compid, MAV_MISSION_ERROR);
}

/*
  handle a MISSION_SET_CURRENT mavlink packet
 */
void GCS_MAVLINK::handle_mission_set_current(AP_Mission &mission, mavlink_message_t *msg)
{
    // decode
    mavlink_mission_set_current_t packet;
    mavlink_msg_mission_set_current_decode(msg, &packet);

    // set current command
    if (mission.set_current_cmd(packet.seq)) {
        mavlink_msg_mission_current_send(chan, mission.get_current_nav_cmd().index);
    }
}

/*
  handle a MISSION_COUNT mavlink packet
 */
void GCS_MAVLINK::handle_mission_count(AP_Mission &mission, mavlink_message_t *msg)
{
    // decode
    mavlink_mission_count_t packet;
    mavlink_msg_mission_count_decode(msg, &packet);

    // start waypoint receiving
    if (packet.count > mission.num_commands_max()) {
        // send NAK
        mavlink_msg_mission_ack_send(chan, msg->sysid, msg->compid, MAV_MISSION_NO_SPACE);
        return;
    }

    // new mission arriving, truncate mission to be the same length
    mission.truncate(packet.count);

    // set variables to help handle the expected receiving of commands from the GCS
    waypoint_timelast_receive = AP_HAL::millis();    // set time we last received commands to now
    waypoint_receiving = true;              // record that we expect to receive commands
    waypoint_request_i = 0;                 // reset the next expected command number to zero
    waypoint_request_last = packet.count;   // record how many commands we expect to receive
    waypoint_timelast_request = 0;          // set time we last requested commands to zero
}

/*
  handle a MISSION_CLEAR_ALL mavlink packet
 */
void GCS_MAVLINK::handle_mission_clear_all(AP_Mission &mission, mavlink_message_t *msg)
{
    // decode
    mavlink_mission_clear_all_t packet;
    mavlink_msg_mission_clear_all_decode(msg, &packet);

    // clear all waypoints
    if (mission.clear()) {
        // send ack
        mavlink_msg_mission_ack_send(chan, msg->sysid, msg->compid, MAV_RESULT_ACCEPTED);
    }else{
        // send nack
        mavlink_msg_mission_ack_send(chan, msg->sysid, msg->compid, 1);
    }
}

/*
  handle a MISSION_WRITE_PARTIAL_LIST mavlink packet
 */
void GCS_MAVLINK::handle_mission_write_partial_list(AP_Mission &mission, mavlink_message_t *msg)
{
    // decode
    mavlink_mission_write_partial_list_t packet;
    mavlink_msg_mission_write_partial_list_decode(msg, &packet);

    // start waypoint receiving
    if ((unsigned)packet.start_index > mission.num_commands() ||
        (unsigned)packet.end_index > mission.num_commands() ||
        packet.end_index < packet.start_index) {
        send_text(MAV_SEVERITY_WARNING,"Flight plan update rejected");
        return;
    }

    waypoint_timelast_receive = AP_HAL::millis();
    waypoint_timelast_request = 0;
    waypoint_receiving   = true;
    waypoint_request_i   = packet.start_index;
    waypoint_request_last= packet.end_index;
}


/*
  handle a GIMBAL_REPORT mavlink packet
 */
void GCS_MAVLINK::handle_gimbal_report(AP_Mount &mount, mavlink_message_t *msg) const
{
    mount.handle_gimbal_report(chan, msg);
}


/*
  return true if a channel has flow control
 */
bool GCS_MAVLINK::have_flow_control(void)
{
    // sanity check chan
    if (chan >= MAVLINK_COMM_NUM_BUFFERS) {
        return false;
    }

    if (mavlink_comm_port[chan] == NULL) {
        return false;
    }

    if (chan == MAVLINK_COMM_0) {
        // assume USB console has flow control
        return hal.gpio->usb_connected() || mavlink_comm_port[chan]->get_flow_control() != AP_HAL::UARTDriver::FLOW_CONTROL_DISABLE;
    } else {
        // all other channels
        return mavlink_comm_port[chan]->get_flow_control() != AP_HAL::UARTDriver::FLOW_CONTROL_DISABLE;
    }
}


/*
  handle a request to change stream rate. Note that copter passes in
  save==false so we don't want the save to happen when the user connects the
  ground station.
 */
void GCS_MAVLINK::handle_request_data_stream(mavlink_message_t *msg, bool save)
{
    mavlink_request_data_stream_t packet;
    mavlink_msg_request_data_stream_decode(msg, &packet);

    int16_t freq = 0;     // packet frequency

    if (packet.start_stop == 0)
        freq = 0;                     // stop sending
    else if (packet.start_stop == 1)
        freq = packet.req_message_rate;                     // start sending
    else
        return;

    AP_Int16 *rate = NULL;
    switch (packet.req_stream_id) {
    case MAV_DATA_STREAM_ALL:
        // note that we don't set STREAM_PARAMS - that is internal only
        for (uint8_t i=0; i<STREAM_PARAMS; i++) {
            if (save) {
                streamRates[i].set_and_save_ifchanged(freq);
            } else {
                streamRates[i].set(freq);
            }
        }
        break;
    case MAV_DATA_STREAM_RAW_SENSORS:
        rate = &streamRates[STREAM_RAW_SENSORS];
        break;
    case MAV_DATA_STREAM_EXTENDED_STATUS:
        rate = &streamRates[STREAM_EXTENDED_STATUS];
        break;
    case MAV_DATA_STREAM_RC_CHANNELS:
        rate = &streamRates[STREAM_RC_CHANNELS];
        break;
    case MAV_DATA_STREAM_RAW_CONTROLLER:
        rate = &streamRates[STREAM_RAW_CONTROLLER];
        break;
    case MAV_DATA_STREAM_POSITION:
        rate = &streamRates[STREAM_POSITION];
        break;
    case MAV_DATA_STREAM_EXTRA1:
        rate = &streamRates[STREAM_EXTRA1];
        break;
    case MAV_DATA_STREAM_EXTRA2:
        rate = &streamRates[STREAM_EXTRA2];
        break;
    case MAV_DATA_STREAM_EXTRA3:
        rate = &streamRates[STREAM_EXTRA3];
        break;
    }

    if (rate != NULL) {
        if (save) {
            rate->set_and_save_ifchanged(freq);
        } else {
            rate->set(freq);
        }
    }
}

void GCS_MAVLINK::handle_param_request_list(mavlink_message_t *msg)
{
    mavlink_param_request_list_t packet;
    mavlink_msg_param_request_list_decode(msg, &packet);

    // send system ID if we can
    char sysid[40];
    if (hal.util->get_system_id(sysid)) {
        send_text(MAV_SEVERITY_WARNING, sysid);
    }

    // Start sending parameters - next call to ::update will kick the first one out
    _queued_parameter = AP_Param::first(&_queued_parameter_token, &_queued_parameter_type);
    _queued_parameter_index = 0;
    _queued_parameter_count = _count_parameters();
}

void GCS_MAVLINK::handle_param_request_read(mavlink_message_t *msg)
{
    mavlink_param_request_read_t packet;
    mavlink_msg_param_request_read_decode(msg, &packet);

    enum ap_var_type p_type;
    AP_Param *vp;
    char param_name[AP_MAX_NAME_SIZE+1];
    if (packet.param_index != -1) {
        AP_Param::ParamToken token;
        vp = AP_Param::find_by_index(packet.param_index, &p_type, &token);
        if (vp == NULL) {
            return;
        }
        vp->copy_name_token(token, param_name, AP_MAX_NAME_SIZE, true);
        param_name[AP_MAX_NAME_SIZE] = 0;
    } else {
        strncpy(param_name, packet.param_id, AP_MAX_NAME_SIZE);
        param_name[AP_MAX_NAME_SIZE] = 0;
        vp = AP_Param::find(param_name, &p_type);
        if (vp == NULL) {
            return;
        }
    }
    
    float value = vp->cast_to_float(p_type);
    mavlink_msg_param_value_send_buf(
        msg,
        chan,
        param_name,
        value,
        mav_var_type(p_type),
        _count_parameters(),
        packet.param_index);
}

void GCS_MAVLINK::handle_param_set(mavlink_message_t *msg, DataFlash_Class *DataFlash)
{
    mavlink_param_set_t packet;
    mavlink_msg_param_set_decode(msg, &packet);
    enum ap_var_type var_type;

    // set parameter
    AP_Param *vp;
    char key[AP_MAX_NAME_SIZE+1];
    strncpy(key, (char *)packet.param_id, AP_MAX_NAME_SIZE);
    key[AP_MAX_NAME_SIZE] = 0;

    // find existing param so we can get the old value
    vp = AP_Param::find(key, &var_type);
    if (vp == NULL) {
        return;
    }
    float old_value = vp->cast_to_float(var_type);

    // set the value
    vp->set_float(packet.param_value, var_type);

    /*
      we force the save if the value is not equal to the old
      value. This copes with the use of override values in
      constructors, such as PID elements. Otherwise a set to the
      default value which differs from the constructor value doesn't
      save the change
     */
    bool force_save = !is_equal(packet.param_value, old_value);

    // save the change
    vp->save(force_save);

    if (DataFlash != NULL) {
        DataFlash->Log_Write_Parameter(key, vp->cast_to_float(var_type));
    }
}


void
GCS_MAVLINK::send_text(MAV_SEVERITY severity, const char *str)
{
    if (severity < MAV_SEVERITY_WARNING && 
        comm_get_txspace(chan) >= 
        MAVLINK_NUM_NON_PAYLOAD_BYTES+MAVLINK_MSG_ID_STATUSTEXT_LEN) {
        // send immediately
        mavlink_msg_statustext_send(chan, severity, str);
    } else {
        // send via the deferred queuing system
        mavlink_statustext_t *s = &pending_status;
        s->severity = (uint8_t)severity;
        strncpy((char *)s->text, str, sizeof(s->text));
        send_message(MSG_STATUSTEXT);
    }
}

void GCS_MAVLINK::handle_radio_status(mavlink_message_t *msg, DataFlash_Class &dataflash, bool log_radio)
{
    mavlink_radio_t packet;
    mavlink_msg_radio_decode(msg, &packet);

    // record if the GCS has been receiving radio messages from
    // the aircraft
    if (packet.remrssi != 0) {
        last_radio_status_remrssi_ms = AP_HAL::millis();
    }

    // use the state of the transmit buffer in the radio to
    // control the stream rate, giving us adaptive software
    // flow control
    if (packet.txbuf < 20 && stream_slowdown < 100) {
        // we are very low on space - slow down a lot
        stream_slowdown += 3;
    } else if (packet.txbuf < 50 && stream_slowdown < 100) {
        // we are a bit low on space, slow down slightly
        stream_slowdown += 1;
    } else if (packet.txbuf > 95 && stream_slowdown > 10) {
        // the buffer has plenty of space, speed up a lot
        stream_slowdown -= 2;
    } else if (packet.txbuf > 90 && stream_slowdown != 0) {
        // the buffer has enough space, speed up a bit
        stream_slowdown--;
    }

    //log rssi, noise, etc if logging Performance monitoring data
    if (log_radio) {
        dataflash.Log_Write_Radio(packet);
    }
}


/*
  handle an incoming mission item
  return true if this is the last mission item, otherwise false
 */
bool GCS_MAVLINK::handle_mission_item(mavlink_message_t *msg, AP_Mission &mission)
{
    mavlink_mission_item_t packet;
    MAV_MISSION_RESULT result = MAV_MISSION_ACCEPTED;
    struct AP_Mission::Mission_Command cmd = {};
    bool mission_is_complete = false;

    mavlink_msg_mission_item_decode(msg, &packet);

    // convert mavlink packet to mission command
    result = AP_Mission::mavlink_to_mission_cmd(packet, cmd);
    if (result != MAV_MISSION_ACCEPTED) {
        goto mission_ack;
    }

    if (packet.current == 2) {                                               
        // current = 2 is a flag to tell us this is a "guided mode"
        // waypoint and not for the mission
        handle_guided_request(cmd);

        // verify we received the command
        result = MAV_MISSION_ACCEPTED;
        goto mission_ack;
    }

    if (packet.current == 3) {
        //current = 3 is a flag to tell us this is a alt change only
        // add home alt if needed
        handle_change_alt_request(cmd);

        // verify we recevied the command
        result = MAV_MISSION_ACCEPTED;
        goto mission_ack;
    }

    // Check if receiving waypoints (mission upload expected)
    if (!waypoint_receiving) {
        result = MAV_MISSION_ERROR;
        goto mission_ack;
    }

    // check if this is the requested waypoint
    if (packet.seq != waypoint_request_i) {
        result = MAV_MISSION_INVALID_SEQUENCE;
        goto mission_ack;
    }
    
    // if command index is within the existing list, replace the command
    if (packet.seq < mission.num_commands()) {
        if (mission.replace_cmd(packet.seq,cmd)) {
            result = MAV_MISSION_ACCEPTED;
        }else{
            result = MAV_MISSION_ERROR;
            goto mission_ack;
        }
        // if command is at the end of command list, add the command
    } else if (packet.seq == mission.num_commands()) {
        if (mission.add_cmd(cmd)) {
            result = MAV_MISSION_ACCEPTED;
        }else{
            result = MAV_MISSION_ERROR;
            goto mission_ack;
        }
        // if beyond the end of the command list, return an error
    } else {
        result = MAV_MISSION_ERROR;
        goto mission_ack;
    }
    
    // update waypoint receiving state machine
    waypoint_timelast_receive = AP_HAL::millis();
    waypoint_request_i++;
    
    if (waypoint_request_i >= waypoint_request_last) {
        mavlink_msg_mission_ack_send_buf(
            msg,
            chan,
            msg->sysid,
            msg->compid,
            MAV_MISSION_ACCEPTED);
        
        send_text(MAV_SEVERITY_INFO,"Flight plan received");
        waypoint_receiving = false;
        mission_is_complete = true;
        // XXX ignores waypoint radius for individual waypoints, can
        // only set WP_RADIUS parameter
    } else {
        waypoint_timelast_request = AP_HAL::millis();
        // if we have enough space, then send the next WP immediately
        if (comm_get_txspace(chan) >= 
            MAVLINK_NUM_NON_PAYLOAD_BYTES+MAVLINK_MSG_ID_MISSION_ITEM_LEN) {
            queued_waypoint_send();
        } else {
            send_message(MSG_NEXT_WAYPOINT);
        }
    }
    return mission_is_complete;

mission_ack:
    // we are rejecting the mission/waypoint
    mavlink_msg_mission_ack_send_buf(
        msg,
        chan,
        msg->sysid,
        msg->compid,
        result);

    return mission_is_complete;
}

void 
GCS_MAVLINK::handle_gps_inject(const mavlink_message_t *msg, AP_GPS &gps)
{
    mavlink_gps_inject_data_t packet;
    mavlink_msg_gps_inject_data_decode(msg, &packet);
    //TODO: check target

    gps.inject_data(packet.data, packet.len);

}

// send a message using mavlink, handling message queueing
void GCS_MAVLINK::send_message(enum ap_message id)
{
    uint8_t i, nextid;

    // see if we can send the deferred messages, if any
    while (num_deferred_messages != 0) {
        if (!try_send_message(deferred_messages[next_deferred_message])) {
            break;
        }
        next_deferred_message++;
        if (next_deferred_message == MSG_RETRY_DEFERRED) {
            next_deferred_message = 0;
        }
        num_deferred_messages--;
    }

    if (id == MSG_RETRY_DEFERRED) {
        return;
    }

    // this message id might already be deferred
    for (i=0, nextid = next_deferred_message; i < num_deferred_messages; i++) {
        if (deferred_messages[nextid] == id) {
            // its already deferred, discard
            return;
        }
        nextid++;
        if (nextid == MSG_RETRY_DEFERRED) {
            nextid = 0;
        }
    }

    if (num_deferred_messages != 0 ||
        !try_send_message(id)) {
        // can't send it now, so defer it
        if (num_deferred_messages == MSG_RETRY_DEFERRED) {
            // the defer buffer is full, discard
            return;
        }
        nextid = next_deferred_message + num_deferred_messages;
        if (nextid >= MSG_RETRY_DEFERRED) {
            nextid -= MSG_RETRY_DEFERRED;
        }
        deferred_messages[nextid] = id;
        num_deferred_messages++;
    }
}

void
GCS_MAVLINK::update(run_cli_fn run_cli)
{
    // receive new packets
    mavlink_message_t msg;
    mavlink_status_t status;
    status.packet_rx_drop_count = 0;

    // process received bytes
    uint16_t nbytes = comm_get_available(chan);
    for (uint16_t i=0; i<nbytes; i++)
    {
        uint8_t c = comm_receive_ch(chan);

        if (run_cli) {
            /* allow CLI to be started by hitting enter 3 times, if no
             *  heartbeat packets have been received */
            if ((mavlink_active==0) && (AP_HAL::millis() - _cli_timeout) < 20000 && 
                comm_is_idle(chan)) {
                if (c == '\n' || c == '\r') {
                    crlf_count++;
                } else {
                    crlf_count = 0;
                }
                if (crlf_count == 3) {
                    run_cli(_port);
                }
            }
        }

        // Try to get a new message
        if (mavlink_parse_char(chan, c, &msg, &status)) {
            // we exclude radio packets to make it possible to use the
            // CLI over the radio
            if (msg.msgid != MAVLINK_MSG_ID_RADIO && msg.msgid != MAVLINK_MSG_ID_RADIO_STATUS) {
                mavlink_active |= (1U<<(chan-MAVLINK_COMM_0));
            }
            // if a snoop handler has been setup then use it
            if (msg_snoop != NULL) {
                msg_snoop(&msg);
            }
            if (routing.check_and_forward(chan, &msg)) {
                handleMessage(&msg);
            }
        }
    }

    if (!waypoint_receiving) {
        return;
    }

    uint32_t tnow = AP_HAL::millis();
    uint32_t wp_recv_time = 1000U + (stream_slowdown*20);

    if (waypoint_receiving &&
        waypoint_request_i <= waypoint_request_last &&
        tnow - waypoint_timelast_request > wp_recv_time) {
        waypoint_timelast_request = tnow;
        send_message(MSG_NEXT_WAYPOINT);
    }

    // stop waypoint receiving if timeout
    if (waypoint_receiving && (tnow - waypoint_timelast_receive) > wp_recv_time+waypoint_receive_timeout) {
        waypoint_receiving = false;
    }
}


/*
  send raw GPS position information (GPS_RAW_INT, GPS2_RAW, GPS_RTK and GPS2_RTK).
  returns true if messages fit into transmit buffer, false otherwise.
 */
bool GCS_MAVLINK::send_gps_raw(AP_GPS &gps)
{
    if (comm_get_txspace(chan) >= 
        MAVLINK_MSG_ID_GPS_RAW_INT_LEN + MAVLINK_NUM_NON_PAYLOAD_BYTES) {
        gps.send_mavlink_gps_raw(chan);
    } else {
        return false;
    }

    if (gps.highest_supported_status(0) > AP_GPS::GPS_OK_FIX_3D) {
        if (comm_get_txspace(chan) >= MAVLINK_NUM_NON_PAYLOAD_BYTES+MAVLINK_MSG_ID_GPS_RTK_LEN) {
            gps.send_mavlink_gps_rtk(chan);
        }

    }

    if (gps.num_sensors() > 1 && gps.status(1) > AP_GPS::NO_GPS) {

        if (comm_get_txspace(chan) >= MAVLINK_NUM_NON_PAYLOAD_BYTES+MAVLINK_MSG_ID_GPS2_RAW_LEN) {
            gps.send_mavlink_gps2_raw(chan);
        }

        if (gps.highest_supported_status(1) > AP_GPS::GPS_OK_FIX_3D) {
            if (comm_get_txspace(chan) >= 
                MAVLINK_NUM_NON_PAYLOAD_BYTES+MAVLINK_MSG_ID_GPS2_RTK_LEN) {
                gps.send_mavlink_gps2_rtk(chan);
            }
        }
    }

    //TODO: Should check what else managed to get through...
    return true;

}


/*
  send the SYSTEM_TIME message
 */
void GCS_MAVLINK::send_system_time(AP_GPS &gps)
{
    mavlink_msg_system_time_send(
        chan,
        gps.time_epoch_usec(),
        AP_HAL::millis());
}


/*
  send RC_CHANNELS_RAW, and RC_CHANNELS messages
 */
void GCS_MAVLINK::send_radio_in(uint8_t receiver_rssi)
{
    uint32_t now = AP_HAL::millis();

    uint16_t values[8];
    memset(values, 0, sizeof(values));
    hal.rcin->read(values, 8);

    mavlink_msg_rc_channels_raw_send(
        chan,
        now,
        0, // port
        values[0],
        values[1],
        values[2],
        values[3],
        values[4],
        values[5],
        values[6],
        values[7],
        receiver_rssi);

    if (hal.rcin->num_channels() > 8 && 
        comm_get_txspace(chan) >= MAVLINK_MSG_ID_RC_CHANNELS_LEN + MAVLINK_NUM_NON_PAYLOAD_BYTES) {
        mavlink_msg_rc_channels_send(
            chan,
            now,
            hal.rcin->num_channels(),
            hal.rcin->read(CH_1),
            hal.rcin->read(CH_2),
            hal.rcin->read(CH_3),
            hal.rcin->read(CH_4),
            hal.rcin->read(CH_5),
            hal.rcin->read(CH_6),
            hal.rcin->read(CH_7),
            hal.rcin->read(CH_8),
            hal.rcin->read(CH_9),
            hal.rcin->read(CH_10),
            hal.rcin->read(CH_11),
            hal.rcin->read(CH_12),
            hal.rcin->read(CH_13),
            hal.rcin->read(CH_14),
            hal.rcin->read(CH_15),
            hal.rcin->read(CH_16),
            hal.rcin->read(CH_17),
            hal.rcin->read(CH_18),
            receiver_rssi);        
    }
}

void GCS_MAVLINK::send_raw_imu(const AP_InertialSensor &ins, const Compass &compass)
{
    const Vector3f &accel = ins.get_accel(0);
    const Vector3f &gyro = ins.get_gyro(0);
    Vector3f mag;
    if (compass.get_count() >= 1) {
        mag = compass.get_field(0);
    } else {
        mag.zero();
    }

    mavlink_msg_raw_imu_send(
        chan,
        AP_HAL::micros(),
        accel.x * 1000.0f / GRAVITY_MSS,
        accel.y * 1000.0f / GRAVITY_MSS,
        accel.z * 1000.0f / GRAVITY_MSS,
        gyro.x * 1000.0f,
        gyro.y * 1000.0f,
        gyro.z * 1000.0f,
        mag.x,
        mag.y,
        mag.z);

    if (ins.get_gyro_count() <= 1 &&
        ins.get_accel_count() <= 1 &&
        compass.get_count() <= 1) {
        return;
    }
    const Vector3f &accel2 = ins.get_accel(1);
    const Vector3f &gyro2 = ins.get_gyro(1);
    if (compass.get_count() >= 2) {
        mag = compass.get_field(1);
    } else {
        mag.zero();
    }
    mavlink_msg_scaled_imu2_send(
        chan,
        AP_HAL::millis(),
        accel2.x * 1000.0f / GRAVITY_MSS,
        accel2.y * 1000.0f / GRAVITY_MSS,
        accel2.z * 1000.0f / GRAVITY_MSS,
        gyro2.x * 1000.0f,
        gyro2.y * 1000.0f,
        gyro2.z * 1000.0f,
        mag.x,
        mag.y,
        mag.z);        

    if (ins.get_gyro_count() <= 2 &&
        ins.get_accel_count() <= 2 &&
        compass.get_count() <= 2) {
        return;
    }
    const Vector3f &accel3 = ins.get_accel(2);
    const Vector3f &gyro3 = ins.get_gyro(2);
    if (compass.get_count() >= 3) {
        mag = compass.get_field(2);
    } else {
        mag.zero();
    }
    mavlink_msg_scaled_imu3_send(
        chan,
        AP_HAL::millis(),
        accel3.x * 1000.0f / GRAVITY_MSS,
        accel3.y * 1000.0f / GRAVITY_MSS,
        accel3.z * 1000.0f / GRAVITY_MSS,
        gyro3.x * 1000.0f,
        gyro3.y * 1000.0f,
        gyro3.z * 1000.0f,
        mag.x,
        mag.y,
        mag.z);        
}

void GCS_MAVLINK::send_scaled_pressure(AP_Baro &barometer)
{
    uint32_t now = AP_HAL::millis();
    float pressure = barometer.get_pressure(0);
    mavlink_msg_scaled_pressure_send(
        chan,
        now,
        pressure*0.01f, // hectopascal
        (pressure - barometer.get_ground_pressure(0))*0.01f, // hectopascal
        barometer.get_temperature(0)*100); // 0.01 degrees C

    if (barometer.num_instances() > 1) {
        pressure = barometer.get_pressure(1);
        mavlink_msg_scaled_pressure2_send(
            chan,
            now,
            pressure*0.01f, // hectopascal
            (pressure - barometer.get_ground_pressure(1))*0.01f, // hectopascal
            barometer.get_temperature(1)*100); // 0.01 degrees C        
    }

    if (barometer.num_instances() > 2) {
        pressure = barometer.get_pressure(2);
        mavlink_msg_scaled_pressure3_send(
            chan,
            now,
            pressure*0.01f, // hectopascal
            (pressure - barometer.get_ground_pressure(2))*0.01f, // hectopascal
            barometer.get_temperature(2)*100); // 0.01 degrees C        
    }
}

void GCS_MAVLINK::send_sensor_offsets(const AP_InertialSensor &ins, const Compass &compass, AP_Baro &barometer)
{
    // run this message at a much lower rate - otherwise it
    // pointlessly wastes quite a lot of bandwidth
    static uint8_t counter;
    if (counter++ < 10) {
        return;
    }
    counter = 0;

    const Vector3f &mag_offsets = compass.get_offsets(0);
    const Vector3f &accel_offsets = ins.get_accel_offsets(0);
    const Vector3f &gyro_offsets = ins.get_gyro_offsets(0);

    mavlink_msg_sensor_offsets_send(chan,
                                    mag_offsets.x,
                                    mag_offsets.y,
                                    mag_offsets.z,
                                    compass.get_declination(),
                                    barometer.get_pressure(),
                                    barometer.get_temperature()*100,
                                    gyro_offsets.x,
                                    gyro_offsets.y,
                                    gyro_offsets.z,
                                    accel_offsets.x,
                                    accel_offsets.y,
                                    accel_offsets.z);
}

void GCS_MAVLINK::send_ahrs(AP_AHRS &ahrs)
{
    const Vector3f &omega_I = ahrs.get_gyro_drift();
    mavlink_msg_ahrs_send(
        chan,
        omega_I.x,
        omega_I.y,
        omega_I.z,
        0,
        0,
        ahrs.get_error_rp(),
        ahrs.get_error_yaw());
}

/*
  send a statustext message to all active MAVLink connections
 */
void GCS_MAVLINK::send_statustext_all(MAV_SEVERITY severity, const char *fmt, ...)
{
    for (uint8_t i=0; i<MAVLINK_COMM_NUM_BUFFERS; i++) {
        if ((1U<<i) & mavlink_active) {
            mavlink_channel_t chan = (mavlink_channel_t)(MAVLINK_COMM_0+i);
            if (comm_get_txspace(chan) >= MAVLINK_NUM_NON_PAYLOAD_BYTES + MAVLINK_MSG_ID_STATUSTEXT_LEN) {
                char msg2[50];
                va_list arg_list;
                va_start(arg_list, fmt);
                hal.util->vsnprintf((char *)msg2, sizeof(msg2), fmt, arg_list);
                va_end(arg_list);
                mavlink_msg_statustext_send(chan,
                                            severity,
                                            msg2);
            }
        }
    }
}

/*
  send a parameter value message to all active MAVLink connections
 */
void GCS_MAVLINK::send_parameter_value_all(const char *param_name, ap_var_type param_type, float param_value)
{
    for (uint8_t i=0; i<MAVLINK_COMM_NUM_BUFFERS; i++) {
        if ((1U<<i) & mavlink_active) {
            mavlink_channel_t chan = (mavlink_channel_t)(MAVLINK_COMM_0+i);
            if (comm_get_txspace(chan) >= MAVLINK_NUM_NON_PAYLOAD_BYTES + MAVLINK_MSG_ID_PARAM_VALUE_LEN) {
                mavlink_msg_param_value_send(
                    chan,
                    param_name,
                    param_value,
                    mav_var_type(param_type),
                    _count_parameters(),
                    -1);
            }
        }
    }
}

// report battery2 state
void GCS_MAVLINK::send_battery2(const AP_BattMonitor &battery)
{
    if (battery.num_instances() > 1) {
        mavlink_msg_battery2_send(chan, battery.voltage2()*1000, -1);
    }
}

/*
  handle a SET_MODE MAVLink message
 */
void GCS_MAVLINK::handle_set_mode(mavlink_message_t* msg, set_mode_fn set_mode)
{
    uint8_t result = MAV_RESULT_FAILED;
    mavlink_set_mode_t packet;
    mavlink_msg_set_mode_decode(msg, &packet);

    // only accept custom modes because there is no easy mapping from Mavlink flight modes to AC flight modes
    if (packet.base_mode & MAV_MODE_FLAG_CUSTOM_MODE_ENABLED) {
        if (set_mode(packet.custom_mode)) {
            result = MAV_RESULT_ACCEPTED;
        }
    } else if (packet.base_mode == MAV_MODE_FLAG_DECODE_POSITION_SAFETY) {
        // set the safety switch position. Must be in a command by itself
        if (packet.custom_mode == 0) {
            // turn safety off (pwm outputs flow to the motors)
            hal.rcout->force_safety_off();
            result = MAV_RESULT_ACCEPTED;
        } else if (packet.custom_mode == 1) {
            // turn safety on (no pwm outputs to the motors)
            if (hal.rcout->force_safety_on()) {
                result = MAV_RESULT_ACCEPTED;
            }
        }
    }

    // send ACK or NAK
    mavlink_msg_command_ack_send_buf(msg, chan, MAVLINK_MSG_ID_SET_MODE, result);
}

#if AP_AHRS_NAVEKF_AVAILABLE
/*
  send OPTICAL_FLOW message
 */
void GCS_MAVLINK::send_opticalflow(AP_AHRS_NavEKF &ahrs, const OpticalFlow &optflow)
{
    // exit immediately if no optical flow sensor or not healthy
    if (!optflow.healthy()) {
        return;
    }

    // get rates from sensor
    const Vector2f &flowRate = optflow.flowRate();
    const Vector2f &bodyRate = optflow.bodyRate();
    float hagl = 0;

    if (ahrs.have_inertial_nav()) {
        ahrs.get_NavEKF().getHAGL(hagl);
    }

    // populate and send message
    mavlink_msg_optical_flow_send(
        chan,
        AP_HAL::millis(),
        0, // sensor id is zero
        flowRate.x,
        flowRate.y,
        bodyRate.x,
        bodyRate.y,
        optflow.quality(),
        hagl); // ground distance (in meters) set to zero
}
#endif

/*
  send AUTOPILOT_VERSION packet
 */
void GCS_MAVLINK::send_autopilot_version(uint8_t major_version, uint8_t minor_version, uint8_t patch_version, uint8_t version_type) const
{
    uint32_t flight_sw_version = 0;
    uint32_t middleware_sw_version = 0;
    uint32_t os_sw_version = 0;
    uint32_t board_version = 0;
    uint8_t flight_custom_version[8];
    uint8_t middleware_custom_version[8];
    uint8_t os_custom_version[8];
    uint16_t vendor_id = 0;
    uint16_t product_id = 0;
    uint64_t uid = 0;
    
    flight_sw_version = major_version << (8*3) | \
                        minor_version << (8*2) | \
                        patch_version << (8*1) | \
                        version_type  << (8*0);

#if defined(GIT_VERSION)
    strncpy((char *)flight_custom_version, GIT_VERSION, 8);
#else
    memset(middleware_custom_version,0,8);
#endif

#if defined(PX4_GIT_VERSION)
    strncpy((char *)middleware_custom_version, PX4_GIT_VERSION, 8);
#else
    memset(middleware_custom_version,0,8);
#endif
    
#if defined(NUTTX_GIT_VERSION)
    strncpy((char *)os_custom_version, NUTTX_GIT_VERSION, 8);
#else
    memset(os_custom_version,0,8);
#endif
    
    mavlink_msg_autopilot_version_send(
        chan,
        hal.util->get_capabilities(),
        flight_sw_version,
        middleware_sw_version,
        os_sw_version,
        board_version,
        flight_custom_version,
        middleware_custom_version,
        os_custom_version,
        vendor_id,
        product_id,
        uid
    );
}


/*
  send LOCAL_POSITION_NED message
 */
void GCS_MAVLINK::send_local_position(const AP_AHRS &ahrs) const
{
    Vector3f local_position, velocity;
    if (!ahrs.get_relative_position_NED(local_position) ||
        !ahrs.get_velocity_NED(velocity)) {
        // we don't know the position and velocity
        return;
    }

    mavlink_msg_local_position_ned_send(
        chan,
        AP_HAL::millis(),
        local_position.x,
        local_position.y,
        local_position.z,
        velocity.x,
        velocity.y,
        velocity.z);
}

/*
  send LOCAL_POSITION_NED message
 */
void GCS_MAVLINK::send_vibration(const AP_InertialSensor &ins) const
{
    Vector3f vibration = ins.get_vibration_levels();

    mavlink_msg_vibration_send(
        chan,
        AP_HAL::micros64(),
        vibration.x,
        vibration.y,
        vibration.z,
        ins.get_accel_clip_count(0),
        ins.get_accel_clip_count(1),
        ins.get_accel_clip_count(2));
}

void GCS_MAVLINK::send_home(const Location &home) const
{
    if (comm_get_txspace(chan) >= MAVLINK_NUM_NON_PAYLOAD_BYTES + MAVLINK_MSG_ID_HOME_POSITION_LEN) {
        const float q[4] = {1.0f, 0.0f, 0.0f, 0.0f};
        mavlink_msg_home_position_send(
            chan,
            home.lat,
            home.lng,
            home.alt / 100,
            0.0f, 0.0f, 0.0f,
            q,
            0.0f, 0.0f, 0.0f);
    }
}

void GCS_MAVLINK::send_home_all(const Location &home)
{
    const float q[4] = {1.0f, 0.0f, 0.0f, 0.0f};
    for (uint8_t i=0; i<MAVLINK_COMM_NUM_BUFFERS; i++) {
        if ((1U<<i) & mavlink_active) {
            mavlink_channel_t chan = (mavlink_channel_t)(MAVLINK_COMM_0+i);
            if (comm_get_txspace(chan) >= MAVLINK_NUM_NON_PAYLOAD_BYTES + MAVLINK_MSG_ID_HOME_POSITION_LEN) {
                mavlink_msg_home_position_send(
                    chan,
                    home.lat,
                    home.lng,
                    home.alt / 100,
                    0.0f, 0.0f, 0.0f,
                    q,
                    0.0f, 0.0f, 0.0f);
            }
        }
    }
}