dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
24,931 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

24931 Commits

Author SHA1 Message Date
ritul jasuja fed06955bc Update debug message as per connection link 2018-01-17 10:10:33 +01:00
Beat Küng f672152d2d logger: change 'removing log directory' warning to info 2018-01-17 02:19:01 -05:00
Beat Küng a329fd4c76 SITL configs: set SDLOG_DIRS_MAX to 7 
Avoids ending up with huge log directories.

plus some param alphabetic reordering
 2018-01-17 02:19:01 -05:00
Julien Lecoeur b7d7d1209b px_generate_mixers.py: scale mixer so that sum(z_thrust_scale)==n_rotors 2018-01-17 00:01:00 -05:00
Julien Lecoeur 262d9c790b MultirotorMixer: Apply thrust gain independently from other axes 
Align the way motor output is computed with the model used in the mixer generation script.
previous:
`out = (roll_gain*roll + pitch_gain*pitch + yaw_gain*yaw + thrust)*out_gain`
new:
`out = roll_gain*roll + pitch_gain*pitch + yaw_gain*yaw + thrust_gain*thrust`
which is the standard matrix*vector multiplication.

This commit has 0 effect on symmetric platforms (i.e. most) as thrust_gain==1 on these platforms.
On asymmetric platform --where some thrust_gain are lower than 1-- the previous formulation resulted in coupling between thrust and other axes.

fixes #8628
 2018-01-17 00:01:00 -05:00
Daniel Agar 0e3574c44f hott automatically include hott_sensors and hott_telemetry 2018-01-16 23:46:45 -05:00
Daniel Agar c20594cd0e move all barometers to the same folder 2018-01-16 23:46:45 -05:00
Daniel Agar bad813e911 move all magnetometers to the same folder 2018-01-16 23:46:45 -05:00
Beat Küng 094fa92de0 posix main shell: do not update the prompt for unprintable chars (#8704) 2018-01-16 23:45:28 -05:00
Julien Lecoeur 0e65753568 Iris: set mixer to quad_wide 
The geometry was previously quad_deadcat in which front motors are closer to CG and thus more loaded in hover.
quad_wide is the same geometry as quad_deadcat except the CG is centered so all motors are loaded equally.
Flight logs on IRIS with deadcat mixer showed that
- all motors are equally loaded during hover (actuator_outputs 0 to 3 have similar values)
- a negative pitch offset is building up soon after takeoff (visible in actuator_controls)
 2018-01-16 16:09:15 +01:00
Simon Laube b184b61457 IO: fix px4io uploader to work reliably on F7 platform. 
- Missing get_sync() in verify function
- Allow some time to reboot before closing the serial port
  (closing the serial port drives TX low)
 2018-01-16 08:36:51 +01:00
Simon Laube 53249c53b5 IO: Move buffer allocation into the architecture dependent code files. 2018-01-16 08:36:51 +01:00
Daniel Agar cc5e00feca px4io_serial_f7 fix style 2018-01-16 08:36:51 +01:00
Lorenz Meier 15a69b881d Enable IO image buildig for FMUv5 2018-01-16 08:36:51 +01:00
Simon Laube c6c9f4dc64 IO: Implement serial driver for STM32F7 MCUs. 2018-01-16 08:36:51 +01:00
Simon Laube a26c3a0530 IO: Split STM32F4 specific code for serial interface. 2018-01-16 08:36:51 +01:00
David Sidrane e5317ed9b6 px4fmu-v5: Define UART7 for PX4IO 2018-01-16 08:36:51 +01:00
David Sidrane 2df5d23ab6 px4fmu-v5:Add px4io 2018-01-16 08:36:51 +01:00
PX4 Jenkins 49c838ffeb Update sitl_gazebo submodule Mon Jan 15 18:19:28 CST 2018 2018-01-15 19:53:36 -05:00
Daniel Agar 67f89f51ff move all distance sensor drivers to the same folder 2018-01-15 14:34:02 -05:00
Daniel Agar 576b42fea3 move all differential pressure drivers to the same folder 2018-01-15 14:34:02 -05:00
ChristophTobler 6d3dda2802 update DriverFramework to get ltc2946 fix (#8693) 2018-01-15 14:33:22 -05:00
Daniel Agar 5ab6834fed NuttX Make.defs.in ignore -Werror=logical-op 
This is a temporary workaround for equal expressions in chip/sam_xdmac.c
and can be reverted once fixed properly in NuttX. Needed for the GCC 7
upgrade in #8551.
 2018-01-15 12:57:29 -05:00
Daniel Agar 9b5ae1ef7a NuttX upgrade default compiler to GCC 7 2018-01-15 12:57:29 -05:00
Daniel Agar cd296c5f88
circleci skip astyle until versioning is resolved (#8691) 
- revert after #8689 is resolved
 2018-01-15 12:23:21 -05:00
ChristophTobler 18b83f2960 eagle posix-config: add sleep after muorb 
without this param set doesn't work -> adsp side never receives changes
 2018-01-15 14:21:27 +01:00
ChristophTobler 872cba12d4 update ecl submodule 2018-01-15 11:11:56 +01:00
ChristophTobler 3a52e7ee5d simulator mavlink: set vision pos/val valid 2018-01-15 11:11:56 +01:00
ChristophTobler 66c67f89e6 ekf2: check if vision_position pos/vel are valid before using them 2018-01-15 11:11:56 +01:00
ChristophTobler 6609e4843b mavlink receiver: set vision_position pos/vel invalid depending on covariance 2018-01-15 11:11:56 +01:00
ChristophTobler c7cf442e16 ekf2: use ev eph/v for noise parameter if bigger than noise param 2018-01-15 11:11:56 +01:00
Beat Küng 1d59d89282 posix-config iris_replay: log until SITL exits 
If a log with multiple (dis)arming events was replayed, multiple logs were
created. This changes the replay to only create a single log.
 2018-01-15 10:27:56 +01:00
Nicolas de Palezieux 45fd908784 mavlink : add support for precision landing 2018-01-15 10:27:23 +01:00
Nicolas de Palezieux 4fecb6fe20 irlock : add support for precision landing 2018-01-15 10:27:23 +01:00
Nicolas de Palezieux 155c55814b cmake configs : Add precision landing support 2018-01-15 10:27:23 +01:00
Nicolas de Palezieux 90e3aeda6c logger : add support for logging precision landing messages 2018-01-15 10:27:23 +01:00
Nicolas de Palezieux f2dbb0ad3b commander : add support for precision landing measurements 2018-01-15 10:27:23 +01:00
Nicolas de Palezieux d9b9b4407a ekf2 : add support for precision landing measurement fusion 2018-01-15 10:27:23 +01:00
Nicolas de Palezieux dd1d0adfef LPE : add support for precision landing measurement fusion 2018-01-15 10:27:23 +01:00
Nicolas de Palezieux 8c0542bdb8 msgs : add support for precision landing 2018-01-15 10:27:23 +01:00
Nicolas de Palezieux f600cfbb9f Add support for testing precision landing in SITL simulation 2018-01-15 10:27:23 +01:00
Nicolas de Palezieux d9221bb8d2 mc_pos_control : add support for precision landing 2018-01-15 10:27:23 +01:00
Nicolas de Palezieux aa4c6c038d navigator : add support for precision landing 2018-01-15 10:27:23 +01:00
Nicolas de Palezieux 652d295b2d Add landing_target_estimator for precision landing from @ndepal 2018-01-15 10:27:23 +01:00
Paul Riseborough b2046ffd6b Tools: fix errors in thermal calibration script 2018-01-15 08:38:54 +01:00
Anthony Lamping d375880c4b improve mavros SITL tests (#8652) 
-created a test base class to centralize redundant methods among the different tests
-added mission waypoint list topic listener (this also helps make sure the simulation is ready)
-check number of mission waypoints in FCU against mission
-increase time for mavros topics to be ready from 30 to 60 seconds
-reduce position check loop rates
-clean up logging
-support QGC plan for mission file format, see #8619
-vehicle is an arg for mission test launch file, working toward other airframes
-Jenkins: fix vtol vehicle arg value
-get MAV_TYPE param and use FW radius for pure fixed-wing mission position check
-remove unused vehicle arg from test in multiple tests launch, clearing runtime warning
 2018-01-14 21:13:45 -05:00
Lorenz Meier e970f3a2a0 MAVLink: Update library submodule 
This brings in new ROI commands and general sync.
 2018-01-14 22:53:05 +01:00
TSC21 ec1c37e1af modules: lpe: push sensor status update to object; prioritize lidar readings over sonar 2018-01-14 22:52:41 +01:00
TSC21 b512759336 modules: lpe: refactor fusion bitmask 2018-01-14 22:52:41 +01:00
Lorenz Meier 1c74887a68 Makefile: Fix CLANG-tidy calls 
The calls have not been updated as the CI target has been.
 2018-01-14 13:28:12 +01:00